IGNITE ESC01 Kid Electric Scooter User Manual

IGNITE ESC01 Kid Electric Scooter

Product Information

The Electric-Assisted Scooter is a product designed for children to use as a means of transportation. It comes with a height-adjustable handlebar, brake, foot switch, charger, spare tool, and an instruction manual. Please note that this product is not designed for multiple riders or use by adults. It is advised to charge the scooter at least once a month when not in use. If the battery is depleted during use, it is advised to charge once every 7 days.

Caution

Please read the operating instructions before riding. Any child must be accompanied by an adult while using this scooter. In Australia, each state and territory has specific regulations that may apply to this product, including where you can legally use such products and if you need to register them with your local road traffic authority. Please be sure to familiarise yourself with these prior to using this product.

Product Overview

• Height adjustment
• Handlebars
• Brake
• Foot switch

What’s in the Box

Safety Instructions

• In Australia, each state and territory has specific regulations that may apply to this product, including where you can legally use such products and if you need to register them with your local road traffic authority. Please be sure to familiarise yourself with these prior to using this product.

• When operating the scooter, a helmet and other protective equipment are required.

• Do not ride this scooter anywhere where it is unsafe to do so (roads, freeways) or anywhere that violates the local regulations & guidelines.

• This scooter is not engineered for the skatepark or stunting use.
  Please keep both hands on the handlebars at all times.

• This scooter is not designed to be used off-road.

• Before use, users must adjust the handlebars to the correct position for their height.

• Where possible, avoid riding over any gap of 3cm or more. Gap’s greater than this can cause damage to the scooter.

• Do not operate the scooter in bad weather (rain, snow, wind,etc.) or immerse the product in water depths deeper than 5cm. This can cause damage to the electrical parts of the scooter.

• It is advised to charge the scooter at least once a month when not in use. If the battery is depleted during use, it is advised to charge once every 7 days.

Product Usage Instructions

1. Before each use, inspect all nuts and bolts to ensure they are tight. Follow the safety instructions outlined in this document.

2. Hold the handle with both hands and gently push it forward.
   When you hear a beep, the power of scooter is turned on.

3. The buzzer emits a beep sound, the specific meaning is as follows:

   • When the scooter is stationary, push it gently and beep to indicate that the power is on.
   • In order for the motor to take over, the user must be manually powering the movement, be standing on the foot button and be traveling ~5km/h. The scooter will not move under its own power from a standing start.

4. Hold the handle with both hands, put one foot on the foot switch, and the other foot pedal back to accelerate. When you hear the beep sound, you can put the other foot on the pedal.

5. If you need to slow down, please use one foot to step on the rear wheel brake.

Scooter Folding Procedure

Before each use, please ensure the bolts highlighted in the instruction manual are tight and secure.

CAUTION: Please read the operating instructions before riding. Any child must be accompanied by an adult while using this scooter. In Australia, each state and territory has specific regulations that may apply to this product, including where you can legally use such products and if you need to register them with your local road traffic authority. Please be sure to familiarise yourself with these prior to using this product.

OVERVIEW

SCOOTER FOLDING PROCEDURE

• Lift the fold ing handle up with one hand and lift the front fork tube with the other hand, and hear a “click”.
• Press the folding lock firmly (the folding lock can adjust the tightness)
• Use the screwdriver to lock the handle block.
• Press the adjustment marble with one hand and adjust the telescopic rods to the proper position with the other hand.
• Locking the buckle
• please fol low the steps shown in the figure to assemble
• Loosen the buckle
• Press adjustment marble to adjust down to the lowest state
• Loosen the folding buckle

BEFORE EACH USE PLEASE ENSURE THE BOLTS HIGHLIGHTED ABOVE ARE TIGHT AND SECURE.

INTRODUCTION

1. Before each use, inspect all nuts and bolts to ensure they are tight. Follow the safety instructions outlined in this document.

2. Hold the handle with both hands and gently push it forward. When you hear a “beep”, the power of scooter is turned on.

3. The buzzer emits a “beep” sound, the specific meaning is as follows:

   • When the scooter is stationary, push it gently and “beep” to indicate that the power is on.
   • In order for the motor to take over, the user must be manually powering the movement, be standing on the foot button and be travelling ~5km/h.
     The scooter will not move under its own power from a standing start.

4. Hold the handle with both hands, put one foot on the foot switch, and the other foot pedal back to accelerate. When you hear the “beep” sound, you can put the other foot on the pedal.

5. If you need to slow down, please use one foot to step on the rear wheel brake.

PRODUCT SAFETY INSTRUCTIONS

1. In Australia, each state and territory has specific regulations that may apply to this product, including where you can legally use such products and if you need to register them with your local road traffic authority. Please be sure to familiarise yourself with
   these prior to using this product.

2. This scooter is designed & engineered for use by children only. It is not designed for multiple riders (at one time) or use by adults. Adult supervision is required at all times.

3. When operating the scooter, a helmet and other protective equipment are required.

4. Do not ride this scooter anywhere where it is unsafe to do so (roads, freeways) or anywhere that violates the local regulations & guidelines.

5. This scooter is not engineered for skatepark or stunting use. Please keep both hands on the handlebars at all times.

6. This scooter is not designed to be used off-road.

7. Before use, users must adjust the handlebars to the correct position for their height.

8. Do not use this scooter below -5°C.

9. Any gradient of 5° or greater will require the rider’s assistance.

10. Where possible, avoid riding over any gap of 3cm or more. Gap’s greater than this can cause damage to the scooter.

11. Do not operate the scooter in bad weather (rain, snow, wind, etc.) or immerse the product in water depths deeper than 5cm. This can cause damage to the electrical parts of the scooter.

12. Do not ride this product on slippery surfaces such as oil or ice.

13. It is advised to charge the scooter at least once a month when not in use. If the battery is depleted during use, it is advised to charge once every 7 days.

Aquilia Group Pty Ltd. shall not be liable for any financial losses, physical injuries, accidents, legal disputes and other interest conflicts resulted from actions that violate the user instruction manual.

BATTERY AND CHARGER

Lithium battery

• The battery needs to be fully charged before the first use.

• If the scooter emits a low battery warning tone, stop use and charge immediately.

• It is advised to fully charge the scooter at least once a month when not in use.
  NOTE: If the battery is damaged due to water, collision, or other abnormal factors, it is not covered by the standard warranty.
  Charger

• The dedicated charger provided with the ESC01 scooter has a charging protection function. When the battery is 100% fully charged, it will automatically stop charging. Not using the provided charger can cause damage to the battery and is not covered by the standard warranty.

• To charge the scooter, open the rubber cover and insert the connector into the charging location.

• Plug the charger input power into an AC100V-240V power socket.

• When the charger indicator is red, the battery is charging; when the charger indicator turns green, the battery is fully charged and ready for use.

• When charging the battery, please place it in a dry and ventilated environment.

MAINTENANCE

1. Wheel
   The ESC01 features wear-resistant and non-inflatable tires. When the tires show signs of deformation, excessive wear, or rupture, they will need to be replaced immediately. Please contact IGNITE customer support to order a replacement set of wheels.

2. Battery
   The lithium battery has a charging cycle of ~500 times.

3. Placement and daily care
   Please do not leave the scooter in direct sunlight or store in a damp/wet location.
   After use clean the scooter with a damp cloth.
   Do not pressure wash the scooter as this will damage the electrical system and is not covered by the standard warranty.

WARRANTY

This product is warranted under normal use for 12 months.
NOTE: Please use this scooter appropriately, any damage caused by abnormal use will not be covered under the standard warranty, this inlcudes:

• If the scooter is not properly maintained and repaired per the instruction manual.
• The use of the ESC01 Kid Scooter in stunts or skate park use that results in damage or malfunction.
• Any disassembly, modifications, or repairs using non-factory parts.
• Incomplete label or part number mismatch.
• Commercial rental.
• Injury caused by mistakes, traffic accidents,or accidental collisions.
• Storing the scooter in direct sunlight.
• Leaving the scooter submerged in more than 5cm of water.

the scooter will emit a ‘beep’ warning sound.

Dimensions

| Scooter size| 74 x 36 x 85/90/95cm

(3 height telescopic front bar)

Pedal distance

(from the ground)

| 8.5cm
Scooter-body ground clearance| 5cm
Weight| Net Weight| 4.9kg
Gross Weight| 5.8kg
Packing| Cardboard carton, external plastic mold package

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>