BRISTAN NVA BF C Niva Chrome Bath Filler Tap User Guide
- June 4, 2024
- BRISTAN
Table of Contents
BRISTAN NVA BF C Niva Chrome Bath Filler Tap
Specifications
Tools You’ll Need
Pack Contents
Spare Parts
To replace any spare parts for your tap, why not scan the QR Code or visit www.bristan.com. and search for your product?
Prior to Installation
All products manufactured and supplied by Bristan are safe to use provided that they are installed, operated, and receive regular maintenance in accordance with these instructions. This product needs to be installed in accordance with, and meet the requirements of the Water Supply (Water Fittings) Regulations 1999 and current by-laws. For full Installation Requirements & Notes (IRN) please visit wras.co.uk/directory.
Isolation valves must be fitted to the inlet water supplies to ensure ease of future maintenance. Before installing this product the water supply must be thoroughly flushed in order to remove any swarf, solder etc. This product must not be modified in any way as this will invalidate the guarantee. Full access must be made available for future maintenance/servicing purposes.
If in doubt, contact a registered plumber or your Local Water Authority or the Secretary of the Institute of Plumbing, address as follows:
The Institute of Plumbing,
- 64 Station Lane, Hornchurch, Essex, RM12 6NB,
- Tel: 01708 472791
Installation
- Feed the tap body through the tap holes, ensuring the plinths are in place.
- Secure the taps to the bath by using the washer and metal back nuts below the bath.
- Connect the hot and cold water supplies to the threaded tails.
Operation
Turn on water supply and check all joints and connections for leaks.
Maintenance Clean/Replace Outlet
- Using an adjustable spanner, unscrew gently to remove the outlet.
- Check for damage. Soak using a suitable solution to de-scale.
IMPORTANT
Isolate the water supply before starting!
Screw back into the tap body to replace the outlet.
General Cleaning
Bristan products are made from premium materials, with hand polishing and electroplated finishes. Your taps or shower should be regularly cleaned with warm water, a mild pH-neutral liquid soap, and polished with a soft cloth. Any residues from soap, toothpaste, shampoos and shower gels can cause blemishes if not rinsed off straight after use.
Household bleaches and cleaners contain harsh chemicals and may damage the surface finish. Avoid using abrasive cloths, scouring pads, scrub sponges, steel wool or anything similar. Some surfaces such as nickel and pewter may be affected by the dye found in some cloths, so it is also important to avoid hanging cloths on spouts.
Valve Cleaning
- Prise off the caps and remove grub screw. Pull off handle and undo the screws to remove the spline adaptors.
- Unscrew the valve using an adjustable spanner. Check any seals and O-rings for damage. Replace valve if necessary.
- Place valves in a suitable solution and soak until fully de-scaled.
- Reverse the steps to replace the valves and handles.
Notes
Please use this space for any notes you or your installer may have regarding the installation/plumbing of this product.
At Bristan, we want to make things as easy as possible for our customers. That’s why we offer solid guarantees on all our products, effective from the date of purchase, to give you peace of mind. To start your free guarantee simply scan the QR code and register your product. Alternatively, visit www.bristan.com/register. For any other queries, please call our Customer Service on 0330 026 6273 where our expert team of advisors will be able to offer you any help and advice. For full guarantee terms and conditions visit www.bristan.com/service- centre/guarantees.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>