64557 JascoPro Series Wi-Fi In-Wall Smart Dimmer Instructions
- June 10, 2024
- JASCO
Table of Contents
64557 JascoPro Series Wi-Fi In-Wall Smart Dimmer
Product Information
JascoProTM Series Wi-Fi In-wall Smart Dimmer
The JascoProTM Series Wi-Fi In-wall Smart Dimmer is a smart home device
that allows you to control your lights through your smartphone or voice
assistant. This dimmer switch requires a neutral wire for installation and
must be mounted indoors. It features space-saving screw terminals and a
reduced housing depth by up to 20% compared to previous Wi-Fi models,
eliminating the need for heat tabs.
The JascoProTM Series Wi-Fi In-wall Smart Dimmer comes with a white and light almond paddle included in the package. It can be connected with existing 3-way switches or Jasco model 46560 Add-on switches in 3 or 4-way connections, changed to invert, always OFF, and always ON. This dimmer switch is compatible with LED and incandescent bulbs.
This product is compliant with various certifications and compliances, which are subject to change without notice.
Product Usage Instructions
Before starting the installation process, make sure you have turned off the power supply to the switch at the breaker box.
Specifications
- Power: 120VAC, 60Hz
- Signal Frequency: 2.4GHz
- Maximum Load: 600W Incandescent, 360 Dimmable CFL/LED
- Range: Up to 100 feet from router
- Operating Temperature: 32-104° F (0-40° C)
- Warranty: 5-year limited product warranty
- Requires neutral wire. Switch must be mounted indoors
DIMENSION
APP
Design Features
- QuickFit™ – Improved components reduce the housing depth by up to 20 percent compared to previous Wi-Fi models and eliminated the need for heat tabs
- SimpleWire™ – Auto line-load sensing terminals support fast installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multiswitch setups
- Turn the connected device On/Off manually or adjust brightness levels with the JascoPro™ Series App
- May be used in single pole installation or with up to four Jasco model 46560 Add-on switches in 3 or 4-way connections, or can be connected with the existing 3-way switch.
- Works with all LED, CFL, halogen and incandescent bulbs
- Blue LED indicates automatic or manual paring mode status. Also indicates switch location in a dark room(with 4 adjustable settings)
- Can be included in multiple Groups, Scenes and automation
- Operates in either switch or dimmer modes
- Double-tap and triple-tap scene activation directly from device
- Set upper and lower brightness levels to eliminate bulb flicker
- Screw Terminal installation; requires wiring connections for Line (Hot), Load, Neutral, and Ground. Traveler wire required for multi pole installation
- Uses a standard decora wall plate (wall plate not included)
- Interchangeable Paddle switch: White & light almond paddle included in package
- LED status can be inverted manually changed to invert, always OFF and always ON
- Inline traveler circuit protection
Installation Recommendations
- Insert wire into port and tighten screw. Do not wrap wire around screw
- Indoor use only
- Wallplates sold separately
- Trilingual Instruction manual – (English, French, Spanish)
White/light almond paddles included
Wiring
Single Location Wiring
To install the JascoProTM Series Wi-Fi In-wall Smart Dimmer in a single
location, follow these steps:
- Connect the white wire from the dimmer switch to the neutral wire.
- Connect the black wire from the dimmer switch to the line wire.
- Connect the red wire from the dimmer switch to the load wire.
- Connect the green wire from the dimmer switch to the ground wire.
- Attach the white/light almond paddles to the switch.
- Turn the power supply back on at the breaker box.
Space-Saving Screw Terminals
Multi-Location Wiring
To install the JascoProTM Series Wi-Fi In-wall Smart Dimmer in a multi-
location setup, follow these steps:
- Install the primary switch in the single-location wiring setup as detailed above.
- Connect the black wire from the add-on switch to the load wire.
- Connect the white wire from the add-on switch to the neutral wire.
- Connect the red wire from the add-on switch to the traveler wire.
- Connect the green wire from the add-on switch to the ground wire.
- Attach the white/light almond paddles to both switches.
- Turn the power supply back on at the breaker box.
Note: For more information on installation and troubleshooting, please refer to the JascoProTM Series App or contact our U.S.-based Consumer Care at 1-800-654-8483 between 7 AM-8 PM, M-F, Central Time.
Certifications & Compliances
Compliances, specifications and availability are subject to change without notice:
Distributed by Jasco Products Company LLC
10 E. Memorial Rd., Oklahoma City, OK
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F,
Central Time.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>