JBL Tune 230 NC Performance TWS Earbuds User Guide
- June 10, 2024
- JBL
Table of Contents
- Tune 230 NC Performance TWS Earbuds
- WHAT’S IN THE BOX
- FIRST TIME USE
- POWER ON & CONNECT
- DUAL CONNECT + SYNC
- CONTROLS
- POWER OFF
- MANUAL SETUP
- DO MORE WITH THE APP
- CHARGING
- LED BEHAVIORS
- TECH SPEC
- IC RF Exposure Information and Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MANUEL D’UTILISATION
CASQUE
PERFORMANCE
TUNE 230 NC TWS
Tune 230 NC Performance TWS Earbuds
QUICK START GUIDE BC TUNE 230NC TWS
WHAT’S IN THE BOX
APP HOW TO WEAR
- Try different sizes for a perfect fit and audio performance
FIRST TIME USE
POWER ON & CONNECT
DUAL CONNECT + SYNC
CONTROLS
- Enable advance controls by connecting your JBL TUNE230NC TWS to JBL Headphones App .
** ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R).
POWER OFF
MANUAL SETUP
DO MORE WITH THE APP
CHARGING
LED BEHAVIORS
TECH SPEC
Model: | TUNE230NCTWS | Impedance: | 16 ohm |
---|---|---|---|
Driver Size: | 6 mm/ 0.24’’ Dynamic Driver | Sensitivity: | 105 dB SPL@1 kHz |
Power supply: | 5V ****1A | Maximum SPL: | 93 dB |
Earbud: | 5.1 g per pc (10.2 g combined)/ | ||
0.011 lbs per pc (0.022 lbs combined) | Microphone sensitivity: | -38 dBV/Pa@1 |
kHz
Charging case:| 47.3 g/ 0.104 lbs| Bluetooth version:| 5.2
Earbud battery type:| Lithium-ion polymer (70 mA/ 3.85 V)| Bluetooth profile
version:| A2DP 1.3 , AVRCP 1.6 HFP 1.7
Charging case battery type:| Lithium-ion polymer (750 mA/ 3.7 V)| Bluetooth
transmitter frequency range:| 2.4 GHz – 2.4835 GHz
Charging time:| 2 hrs from empty| Bluetooth transmitter power:| <10 dBm
Music playtime with BT on and ANC off:| up to 10 hrs| Bluetooth transmitter
modulation:| GFSK, π/4-DQPSK, 8-DPSK
Music playtime with BT on and ANC on:| up to 8 hrs| Maximum operation
temperature:| 45°C
Frequency response:| 20 Hz – 20 kHz| |
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC:6132A-JBLT230NT) has also been tested against this SAR limit
According to this standard, the highest SAR value reported during product
certification for head use is 0.4278 W / kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user’s
head and the back of the headset. The use of belt clips, holsters and similar
accessories shall not contain metal parts in its assembly. Use of accessories
that do not meet these requirements may not comply with IC RF exposure
requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT
CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO
THE INSTRUCTIONS The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names
are those of their respective owners.
Google, Android and Google Play are trademarks of Google LLC.
Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon, Inc. or its affiliates.
FCC ID: APIJBLT230NT
018-210239
HP_JBL_TUNE230NC TWS_QSG_Global_SOP_V14
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>