AVANT PROFESSIONAL BI-COLOR LED LIGHT User Manual

PROFESSIONAL BI-COLOR LED LIGHT
User Manual

AVANT
PROFESSIONAL, PORTABLE CONTINUOUS LIGHT

PRODUCT INTRODUCTION

AVANT – beautiful and ultra-portable, the 100W Avant easily fits in a bag, so you have powerful bi-color LED lighting for any photoshoot

WARNINGS

• Please thoroughly read the manual prior to operating the product and operate the product in strict accordance with the manual;
• Don’t disassemble the product by yourself. If the product requires repair, kindly contact our maintenance personnel. Product failures caused by unauthorized disassembly are not covered by warranty, and hence their repair will be chargeable;
• The product is designed to be actively cooled by fans. Don’t block the fan ducts of the product during operation. The product is a high power light source, so the user should not in any case, operate the product if it is covered. Don’t touch the heat generating parts of the product during operation to avoid scalding injury;
• Don’t submerge the product in water or other liquid/s to avoid safety risk and product failure;
• The power must be switched off during assembly before operation and disassembly after operation;
• After product use, touch, disassemble and store the product only after it has been sufficiently cooled to avoid scald injury;
• Please only use originally supplied accessories to avoid product failure/s;
• Please only use the brand-specific adapter and power cable supplied to avoid damage to the product.

kit

Features

| Lit| Bluetooth on
---|---|---
Unlit| Bluetooth off
| Blue and lit| Fan on
Unlit| Fan off
Red and flashing| Brightness exceeds 20% when fan is off
| Blue| Screen locked
Unlit| Screen activated
| Red and flashing| New firmware revision ready to be upgraded

Installation

1. Installation of Fresnel lens and barndoor
   1.1 Insert the Fresnel lens and fasten it according to the arrow direction as shown in the figure.

• The interfaces of the product are non standard, You can purchase “Bowens Mount Adapter” to adapt the products to accessories of other brands. 1.2 Align the mounts of the barndoor with the edge of the lens and then fasten it.

• The honeycomb plate, filter disc, and dome diffuser are equipped with magnets, and hence can be mounted together with the barndoor. 2. Installation of the handle
  Align the handle with the mounts at the bottom of the light body and then fasten it.

  3. Adjustment of light body angle
     Loosen the butterfly knob on the handle by turning counterclockwise, then adjust the light to the desired angle, and then tighten the knob clockwise.

  4. Installation of power supply
     Adjust the V-mount clamp to the desired appropriate height and then fix it on the tripod (by turning the knob clockwise), and then insert the power supply into the V-mount port.

Power Supply

1. AC power supply
2. DC power supply

Note: Only use the battery pack with an output voltage of 14.2 V-22.2 V and an output current of 12 A, or else the product may be damaged.

• Using an incorrect battery may cause damage to the product. Pay extra attention to the polarity and orientation of the positive and negative poles when connection battery to the product, incorrect polarity connection will cause the light to not light up.

Operation

1. Press and hold the power button for 1.5s to turn on / off the light

2. Brightness adjustment
   2.1 Rotate the brightness adjustment knob, range is 1% – 100% (851m – 8,500 Im). Press and hold the brightness adjustment knob to toggle between brightness unit of measure of INT (%) and LM. Color temperature adjustment
   2.2 Rotate the color temperature adjustment knob to adjust the color temperature, range is 2,700 K – 6,500 K. Lighting effects
   2.3 Press ‘ to enter lighting effects menu and activate different lighting effects. Screen lock / dim
   2.4 Short press the screen lock button to turn off the screen, press any button to turn on the screen. Press and hold the screen lock button to disable all buttons to prevent unintentional operation, press and hold the screen lock button to disable the screen lock.

3. N FC connection
   Place the NFC sensing area of the mobile device against the area with “NFC” mark on the light body, this will immediately launch the Hobolike App.

• Note that the Hobolike APP must already be installed in the device and NFC function in the device is activated. 4. Bluetooth pairing & reset
  Select the Bluetooth – pairing & reset option in the setting page to reset the Bluetooth of the light and activate the pairing state for 60s. If pairing fails, repeat the operation.

  5. Firmware update
     When a firmware is ready to be upgraded, a red “ ” will appear at the upper right corner of the screen. You can upgrade the product’s firmware via the Hobolike App.

• Note the product will only prompt the existence of an updated version if device APP has paired with the product and used regularly”.

App Download

You can download the Hobolike app in the (Apple) App Store and Google Play store by scanning the following QR code. Please visit the official website (www.hobolite.com) for more detailed instructions.

|
---|---
https://app.hobolite.com/download| www.hobolite.com

Product Specifications

AVANT

DC 12-20V
Battery (DC powered version)| 14.8V 6400mAh, 94.72Wh
CRI| 96
TLCI| 96
CCT| 2700-6500K
Dimming| 0-100%
Wireless Method| Bluetooth
Wireless Operating Range| 20m / 65.6ft
Noise| 26db(§1m
Operating Temperature| -10-40°C / 14-104°F
Dimension (Light)| 83.6×117.7×124.6mm / 3.29×4.63×4.91in
Net Weight (Light)| 1.25kg / 2.76Lbs

Optical Properties

1M – NO ACCESSORY

3M – NO ACCESSORY

5M – NO ACCESSORY

1M – ADD HOBOLITE LENS

3M – ADD HOBOLITE LENS

5M – ADD HOBOLITE LENS

TCLI
---|---|---|---|---
AVANT 3454K 100%LM| 6960.555| 2981| 582.9| 98
COS| RF| RG| RA| RE| R1| R2| R3| R4| R5| R6| R7| R8
---|---|---|---|---|---|---|---|---|---|---|---|---
94| 96| 102| 97| 96| 97| 99| 95| 96| 97| 98| 98| 95
R9| R10| R11| R12| R13| R14| R15
---|---|---|---|---|---|---
92| 100| 94| 87| 97| 97| 96
TEST ITEM| OW)| CCT(K)| WAVELEDOMINANTNGTFI(NM)| TCLI
---|---|---|---|---
AVANT 3454K 10%LM| 996.009| 3358| 582| 99
CQS| RF| RG| RA| RE| R1| R2| R3| R4| R5| R6| R7| R8
---|---|---|---|---|---|---|---|---|---|---|---|---
97| 95| 103| 96| 94| 94| 98| 96| 95| 96| 97| 97| 91
R9| R10| R11| R12| R13| R14| R15
---|---|---|---|---|---|---
81| 97| 93| 84| 95| 97| 93
TEST ITEM| 0(LM)| CCT(K)| DOMINANT WAVELENGTH(NM)| TCLI
---|---|---|---|---
AVANT 5328K 100%LM| 8274.21| 4622| 575.1| 99
CQS| RF| RG| RA| RE| R1| R2| R3| R4| R5| R6| R7| R8
---|---|---|---|---|---|---|---|---|---|---|---|---
96| 96| 103| 97| 94| 97| 99| 95| 98| 98| 97| 97| 93
R9| R10| R11| R12| R13| R14| R15
---|---|---|---|---|---|---
82| 98| 96| 76| 98| 97| 94
R9| R10| R11| R12| R13| R14| R15
---|---|---|---|---|---|---
82| 98| 96| 76| 98| 97| 94
COS| RF| RG| RA| RE| R1| R2| R3| R4| R5| R6| R7| R8
---|---|---|---|---|---|---|---|---|---|---|---|---
96| 95| 102| 96| 93| 95| 99| 96| 97| 97| 97| 96| 90
R9| R10| R11| R12| R13| R14| R15
---|---|---|---|---|---|---
77| 99| 96| 77| 96| 96| 92

Warranty Card

Product No.|
---|---
Product name|
Purchase date|
User name|
User telephone|
User address|
Dealer stamp|

AEC LIGHTING SOLUTIONS CO., LTD.
QUALIFIED: PASS
Add: 2548 Bao’an Highway, Jiading District, Shanghai 201801, China

Warranty Terms
We provide a one-year warranty period for the original buyer of the product. For the detailed warranty scope, please log in our website www.hobolite.com.
Important notes:

•  Please retain your original purchase invoice and warranty card and ensure that the complete supplier information is on the invoice, including the purchase date and product serial number, which will be needed when making a claim against the warranty.

The warranty does not cover:

• Damage caused by improper use, false wiring, incompatible, poor quality or misadjusted external devices (excluding damage caused by exposure to rain);
• Damage to the appearance of the product caused within 30 days after the purchase date of purchase or caused by improper surface contact;
• Damage caused by dealers during transportation.

The warranty will be invalid if:

• The product serial number has been torn off or can’t be identified;
• The product has been repaired or modified by oneself, and not by our company nor by designated repair personnel.

AEC LIGHTING SOLUTIONS CO., LTD.
Add. 2548 Bao’an Highway, Jiading District, Shanghai 201801, China
Tel: 86-021-69153369
HOBOLITE OFFICE
HOBOLITE CHINA
2548 BAO’AN HIGHWAY, JIADING DISTRICT,
SHANGHAI 201801,CHINA
86-021-69153369

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>