APRISM MI12 Wi-Fi 6 Dual Radio Indoor Router User Guide

Wi-Fi 6 AX6000 Dual-Radio Indoor Router
Model: M112

Quick Start Guide

www.prismwifi.com

Your AP

Installing the Ceiling Mount with T-bar Clips

1. Secure 2 clips on the T-bar of the ceiling with Maxomm screws.

2. Install the mounting bracket on the clips with 2 M3.5x16mm screws.

3. Insert RI45 cables to WAN/LAN port of MI12.

4. Turn and secure MI12 to the mounting bracket.

Accessing the AP’s Settings Menu

Via Wi-Fi

1. Configure your PC’s IP setting to DHCP to automatically retrieve an IP address.
2. Connect your PC’s Wi-Fi to the SSID printed on the rear of the AP that corresponds to the frequency of the connection (2.4G / 5) using the password “passphrase”
3. Enter the IP address 192.168.2.1 in your browser.
4. In the PRISM login screen use the following login:
   Usemame: prism
   Password: prism

Via WAN (RJ-45)

1. Configure your PC’s IP setting to static and then set the IP address to any address from 192.168.19.2 to 192.168.19.250.
2. Connect your PC’s network port to the WAN port on the AP.
3. Enter the IP address 192.168.19.1 in your browser.
4. In the PRISM login screen use the following login
   Usemame: prism
   Password: prism

Via LAN (RJ-45)

1. Configure your PC’s IP setting to DHCP to automatically retrieve an IP address.
2. Connect your PC’s network port to any of the LAN port on the AP.
3. Enter the IP address 192.168.2.1in your browser.
4. In the PRISM login screen use the following login
   Username: prism
   Password: prism

Labeling

The marking information is located at the bottom of the apparatus.

Regulatory Statements

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation.

IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Country Code selection feature to be disabled for products marketed to the US/CANADA
Operation of this device is restricted to indoor use only.

Industry Canada statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference
2. This device must accept any interference, including interference that may cause undesired operation of the device

Caution:
the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>