MIYOTA Caliber 821A Watch Movement Instruction Manual
- June 9, 2024
- MIYOTA
Table of Contents
MIYOTA Caliber 821A Watch Movement
Product Information
Cal. 821A Instruction manual
The Cal. 821A is a watch with an hour hand, minute hand, and second hand. It also has a date function that may be located at different positions depending on the model. The watch can be adjusted using the crown located on the side of the watch’s face. The specifications of this watch are subject to change without prior notice.
Product Usage Instructions
Setting the Time
- Pull the crown out to the 2nd position.
- Turn the crown to set the hour and minute hands.
- When the crown is pushed back to the normal position, the second hand will begin to run.
Setting the Date
- Pull the crown out to the 1st position.
- Turn the crown counterclockwise to set the date.
- If the date is set between around 9:00 PM and 1:00 AM, the date may not change the following day.
- After the date has been set, push the crown back to its normal position.
Note: The position of the date function may vary depending on the model. If you are unsure where the date function is located on your watch, refer to the user manual or contact customer support for assistance.
DISPLAY
Date positions may be located at different positions depending on models.
SETTING
THE TIME
- Pull the crown out to the 2nd position.
- Turn the crown to set hour and minute hands.
- When the crown is pushed back to the normal position, second hand begins to run.
C) SETTING THE DATE
- Pull the crown out to the 1st position.
- Turn the crown counter-clockwise to set the date.
- If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change the following day.
- After the date has been set, push the crown back to the normal position.
These specifications might be changed without prior notice.
Cal. 821A Instruction manual
Documents / Resources
|
MIYOTA Caliber 821A Watch
Movement
[pdf] Instruction Manual
Caliber 821A, Watch Movement, Caliber 821A Watch Movement
---|---