IKEA 704.755.04 MEDELSTOR Integrated Dishwasher Instructions

IKEA 704.755.04 MEDELSTOR Integrated Dishwasher

info

USING

Product Description

1. Lower spray arm
2. Filters
3. Rating plate
4. Salt container
5. Rinse aid dispenser
6. Detergent dispenser
7. Lower basket
8. Upper spray arms
9. Upper basket
10. Cutlery drawer

Beam-on-Floor
Beam-on-Floor is a light displayed on the floor below the appliance door.

• When a programme starts, a white light is on and stays on for the duration of the programme.
• When the programme is completed, the white light is off.
• When the appliance has a malfunction, the white light flashes.
  Beam-on-Floor is off when the appliance is deactivated.

Control panel

1. On/Off button / Reset button
2. Delay start button
3. Display
4. Programme buttons
5. Option buttons
6. AUTO programme button

Display

• A. Indicators
• B. Time indicator

Indicators

aid dispenser needs refilling.

****| Salt indicator. It is on when the salt container

needs refilling.

****| Machine Care indicator. It is on when the ap‐ pliance needs internal cleaning with the Ma‐

chine Care programme.

****| Drying phase indicator. It is on when a pro‐ gramme with the drying phase is selected. It

flashes when the drying phase operates.

Programmes Overview

Programme| Dishwasher load| Degree of soil| Temperature

(°C)

| Time

(min)

| Options| AutoOpen
---|---|---|---|---|---|---

| Crockery, cutlery| Fresh soil| 50| 30| ****

| ****

| All types of load| All degrees of soil| Cold water| 15| |

| Crockery, cutlery| Fresh, lightly dried-on soil| 60| 60| ****

| ****

| Crockery, cutlery, pots, pans| Normal, lightly dried on soil| 60| 90| ****

| ****
Programme| Dishwasher load| Degree of soil| Temperature

(°C)

| Time

(min)

| Options| AutoOpen
---|---|---|---|---|---|---

| Crockery, cutlery, pots, pans| Normal to heavy, dried-on soil| 60| 160|

| ****
| Crockery, cutlery, pots, pans| Normal, lightly dried on soil| 50| 240|

|
| Crockery, cutlery,

pots, pans

| All| 50 – 60| 120 – 170| |
| For cleaning the appliance interior. Refer to “Cleaning and Mainte‐

nance”.

| 70| 60| |

This programme offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes. This programme is used to assess compliance with the Ecodesign Comission Regulation (EU) 2019/2022

Options
You can adjust the programme selection to your needs by activating options.

Power Clean
Power Clean improves the dishwashing results of the selected programme. The option increases the wash temperature and duration.

Gentle / Glass
Gentle / Glass prevents delicate load, glassware in particular, from damaging. The option prevents rapid changes in the dishwashing temperature of the selected programme and reduces it to 45 °C.

Basic settings

Num‐ ber

| ****

Setting

| ****

Setting value

| Water hardness
---|---|---|---
mmol/l| German de‐

grees (°dH)

1| Water softener| 10| 8.4 – 9.0| 47 – 50
9| 7.6 – 8.3| 43 – 46
8| 6.5 – 7.5| 37 – 42
7| 5.1 – 6.4| 29 – 36
6| 4.0 – 5.0| 23 – 28
5 1)| 3.3 – 3.9| 19 – 22
4| 2.6 – 3.2| 15 – 18
3| 1.9 – 2.5| 11 – 14
2| 0.7 – 1.8| 4 – 10
1 2)| <0.7| <4
2| Rinse aid level| 0A – 8A
3| End sound| 1b (on) / 0b (off)
4| Auto door open| 1o (on) / 0o (off)
5| Key tones| 1F (on) / 0F (off)
6| Latest pro‐ gramme selec‐

tion

| 1H (on) / 0H (off)
---|---|---

1. Factory setting.
2. Do not use salt at this level.

Setting mode

sic settings and to change their values.

****| OK button. Press to enter the selected setting

and to confirm changing its value.

****| Next button. Press to switch between the basic

settings and to change their values.

How to change a setting

1. Press and hold simultaneously and ECO for about 3 seconds to enter setting mode.

   • The lights: , and are on.
   • The display shows the current value of the first available setting.

2. Press Previous or Next to select the setting.
   The display shows the current setting value (a digit and the dedicated letter).

3. Press OK to enter the setting.
   The current setting value flashes.

4. Press Previous or Next to change the value.

5. Press OK to confirm the setting value.

   • The new setting value is saved.
   • The appliance returns to the basic settings list.

6. Press and hold simultaneously and ECO for about 3 seconds to exit the setting mode.

The appliance switches to the programme selection.

AutoOpen
AutoOpen improves the drying results with less energy consumption. The appliance door opens automatically during the drying phase and remains ajar.
Caution! Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. Caution! If children, pets or people with disabilities have access to the appliance, deactivate AutoOpen. The automatic opening of the door may pose a danger and expose possible hazards inside the appliance (such as knives, sharp objects, chemicals).

Before first use

Make sure that the current level of the water softener is adjusted to the hardness of the water supply.
Use the programme Quick 30′ to remove residues from the manufacturing process.

1. Pour 1 litre of water in the salt container.
2. Put 1 kg of salt in the salt container. Use rough salt designed for dishwashers only.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Select the programme Quick 30′ and close the dishwasher door to start it. Do not use detergent and do not put dishes in the baskets.

Caution! Water and salt may come out of the salt container when you fill it. After you fill the salt container, immediately start a programme to prevent corrosion.
If you do not use the appliance, close the water tap.

Troubleshooting

If you encounter an issue with your appliance, check “Troubleshooting” chapter in the full version of the User Manual available on: www.ikea.com.

Technical information

(mm)

| 446 / 818 –

898 / 550

Electrical connec‐

tion 1)

| Voltage (V)| 220 – 240
Frequency (Hz)| 50
Water supply pres‐

sure

| Min. / max. bar (MPa)| 0.5 (0.05) / 10

(1.0)

Water supply| Cold water or hot wa‐

ter 2)

| max 60 °C
Capacity| Place settings| 10

1. Refer to the rating plate for other values.
2. If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption.

To download the full version visit www.ikea.com

References

• Hej! Welcome to IKEA Global
• SENS eRecycling – Stiftung für Recycling von Elektro- und Elektronikgeräten
• Hej! Welcome to IKEA Global

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>