Wittlang Electronics CN-1000W Portable Mobile Energy Storage Power Supply User Manual
- June 10, 2024
- Wittlang Electronics
Table of Contents
Wittlang Electronics CN-1000W Portable Mobile Energy Storage Power Supply
User Manual
Component name
- AC output port
- Vehicle charge / solar charge port 13V-30V
- Cigarette lighter output interface 12V / 10A
- Quick charge input interface 380W
- Illuminating / rescue lamp
- Handle
- Display screen
- Wireless quick charge 15W
- USB output interface 5V / 3A
- Heat dissipation window
- DC start switch
- USB output interface quick charge QC3.0
- 12V/10A output interface
- Type-c output interface
- Special interface for automobile battery charge 13.8V/5A
- AC start switch
- Adapter charge input interface
Accessories list
| NO | Accessories name | Quantity |
|---|---|---|
| 1 | Mainframe | 1 |
| 2 | Adapter | 1 |
| 3 | Battery charge clip | 1 |
| 4 | Manual | 1 |
| 5 | Product Qualification Certificate | 1 |
Function instructions
DC discharge
- Press and hold the “DC start switch”⑪for 3 seconds to turn on or off DC, and the ON icon of DC on the power LED screen will be on, then all DC output ports can be used nor mally, and the current power used will be displayed on the display screen.
- QC3.0 18W / Type-c 65W can charge devices supporting fast charge.
- Wireless charge: after the DC power is turned on, the mobile phone or device with wirel ess charge function will be charged automatically when it is placed on the icon, and the curr ent power used will be displayed on the display screen.
- Illuminating lamp: after turning on the DC power supply, click the DC key to turn on the illuminating lamp. (Briefly press once to turn on the lamp for a long time, twice to flash, thre e times to send rescue the signal, and one more press to turn off the lamp)
- Car battery charge: after turning on the DC power supply, insert one end of the equipped alligator clip connecting wire into the 13.8V interface of the machine, clamp the red alligator clip on the positive pole of the battery and the black alligator clip on the negative pole of the battery. (Note: reverse connection of positive and negative poles will damage the machine)
This function can only be used
for charging, and it is forbidden to use it directly for ignition
AC discharge
Press and hold the “AC start switch” ⑯ for 3 seconds to turn on or off the AC
software. The AC ON icon of DC on the power LED screen will be on / display
the current output voltage, then the device can be used normally by
arbitrarily inserting the load wire into AC output port 1 or port 2, and the
current power will be displayed on the display screen. (Note: please do not
use loads that exceed the maximum output power of the equipment. The maximum
output power of the equipment is 1000W. If the load exceeds 1000W, the power
supply will enter the protection state and cannot be output, and the power
supply can be used normally after removing the excess load and restarting.)
Charge the device
- Insert the original standard adapter (25.5V/5A) into the “adapter charge port”⑰
- Insert the output port of in-vehicle cigarette lighter or solar panel with the specification of 18V / (≥ 150W) into the “vehicle charge / solar charge port” ② of the equipment
- Insert the quick charger (25.5V/15A) into the “quick charge port” ④ After arbitrarily inserting the above three charge methods, the current charge power will be displayed on the LCD display screen of the device, and the battery symbol % will also displ ay the battery charge power one by one.
Charge the device
Product size: 319 270 207 mm
Product weight: about 10.5kg (net weight)
AC output voltage: 110V / 220V
AC output power: 1000W
Wireless charge: 15W
Battery capacity: 270000mA\999WH
Charge time: more than 90% for adapter 8.5H more than 90% for Quick
charge 2.5H
Temperature range for use: 0℃-45℃/32℉-113℉
Temperature range for storage: -5℃-35℃/23℉-95℉
Common questions
Q: what is the battery of this device?
A: Lithium ion battery.
Q: Is it pure sine wave or modified sine wave?
A: It is pure sine wave.
Q: How long can this equipment supply electricity?
A: It depends on the power of your load equipment. It can supply
electricity for 2 hours if the power of the equipment is 500Wh.
Q: Can the device be charged simultaneously through adapter and solar
energy?
A: No, the system of the equipment can only adopt the principle of
priority (whichever is inserted first will be charged first)
Q: What is the service life of this equipment?
A: About 1000 cycles.
Q: How long can 80% power of the device be stored?
A: 3-6 months, but we recommend charging it every 3 months.
Malfunction investigation
If the following “actions” cannot eliminate your malfunction, please stop using the product and contact the product supplier.
| NO | Malfunction performance | Reason | Elimination method |
|---|---|---|---|
| 1 | No output for AC | 1. The load power is too large, exceeding |
the maximum output of the product, res
ulting in automatic protection of the prod
uct.
2. The ambient temperature for use is too
high| 1. Cancel some loads with
excessive power.
2. Turn off the power sup
ply and wait for cooling.。
2| No output for DC| The load current is too large, exceedi
ng the maximum output of the prod
uct, resulting in automatic protection
of the product| Restart it once and then it
can be used normally
Toxic and harmful substances
Composition and quantity of toxic and harmful substances
Pb| Hg| Cd| Cr(Vi)| PBB| PBDE
0| 0| 0| 0| 0| 0
Warning
Please take notice of the input and output voltage range when using this product. Confirm whether the input voltage and power range required by your equipment are within the range of energy storage power supply. The correct use of energy sto rage power supply can prolong its service life.
- The energy storage power supply needs to be stored in a dry envir onment. The correct storage method can prolong the service life of th e energy storage power supply.
- If the product is not used for a long time, please charge and dischar ge the product every 3 months to improve the service life of the produ ct cell.
- Do not store the product in a place where the temperature is too hig h or too low. Too high or too low ambient temperature will shorten the service life of electronic products and seriously damage the product shell.
- Do not wipe the product with corrosive chemical solvents. The appe arance stains can be wiped with a cotton swab dipped with a small am ount of anhydrous alcohol.
- The product must be handled carefully when being us and please do not fall or disassemble it violently.
- There is high voltage in this product. Please do not disassemble it by yourself to avoid safety accidents.
- This product will not be warranted if you disassemble it by yourself.
Do not use it in the bathroom and other places that are wet or may contact
with water
Do not modify or remove the battery
Please keep young children away from the equipment
Do not reverse connect output or input
Do not put the product into the fire
Do not charge the product in a way exceeding the level
The temperature range shall be maintained at the specified 0 ℃ – 60 ℃when
charging
Do not strike or throw the product
If there is any abnormality or malfunction during charge, please contact your
supplier
Do not put the product on flammable substances (bed or blanket) when charging
Warranty card
This product provides customers with warranty service within 1 year from the date of purchase
Guarantee conditions: when warranty service is required, please show this warra nty card and fill in the relevant contents in detail. The company provides product users with a quality guarantee period of 12 mont hs from the date of purchase
Warranty scope:
Quality problems occurred during normal use of the product. It is not within
the scope of warranty if the product is damaged due to error op eration. It is
not within the scope of warranty if you dismantle the machine by yourself. It
is not within the scope of warranty if the label of the machine was torn. For
products not covered by the warranty, our company can provide maintena nce
services, and the maintenance expenses shall be borne by the customer.
Product model| | Manufacturing No.|
---|---|---|---
Purchase date| | Maintenance date|
Customer name| | Contact number|
Customer address| | |
Selling unit|
Description of product abnormality
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interf erence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to w hich the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.