pTron InTunes Ultima Wireless Neckband User Manual

pTron InTunes Ultima Wireless Neckband

Product Picture

1. Volume +/Previous
2. Type-C USB Port
3. Multifunction Button (MFB)
4. LED Indicator
5. .Volume -/Next
6. Earbuds

How to Charge the Neckband

1. Before charging make sure the Neckband has been switched off.

2.  Plug Type-C cable into the charging port of neckband; plug the other side of Type-C cable into the USB charger or other charging device. Charging will start and the red light remains bright on the neckband.

3. It takes approximately 60 minutes to get fully charged. Red light will turn off once the charging process is completed.

   • Power on:
     Press MFB until blue & Red light blinks
     alternatively and then neckband prompts “Power ON”.

   • Pairing Mode:
     Long press the MFB until blue and red LED light flashes alternatively. You will hear a voice prompt “Pairing”.

   • Pair your neckband with your mobile phone:

   • Keep the distance between the neckband and mobile phone (or other devices which needs to be connected) within 1 meter. The closer, the better

   • Keep pressing the MFB until blue and red lights blink alternatively, to enter into pairing mode.

   • Open Bluetooth function on your phone and search for the available Bluetooth devices. Click on “pTron BT” to connect. You will hear a voice prompt “pTron BT is Connected”. Blue light will blink at regular intervals.

   • Attention: It takes a maximum of 120 seconds to pair-up the neckband with your mobile phone. The wireless pairing mode will stop when the lights stop blinking. Please retry the steps from 1 to 4 to pair again in case if this operation fails.

   • Switch on the wireless search function in your mobile phone or other devices that need to be connected. Then the neckband will automatically reconnect with the mobile phone which has connected last time.

   • Switch Off: Keep pressing the MFB until red light blinks and goes out, and the neckband prompts a voice for “power off”.

   • Answer an Incoming Call: When there is an incoming call, the neckband will prompt a voice message, press the MFB once to answer the call, or use your mobile phone to answer it.

   • Reject a Call: When there is an incoming call, the neckband will prompt a voice message. Press MFB for 2 seconds to reject a call.

   • End a Call: Press MFB once to end a call.

   • Last Number Redial: In standby mode, double-click the MFB, to redial your last call.

   • Music Play / Pause: Press MFB once to play/ pause music.

   • Volume Adjustment / Music Selection : Press Volume (+) and Volume (-) keys to adjust volume. Alternatively by Long pressing the Volume (+) and Volume (-) keys to go to previous track and to select next rack respectively.

   • Google Assistance/Siri/Alexa: Long press the power
     Volume +/Previous button for 2sec to activate voice assistant

Disclaimer

The colors and specifications shown/mentioned in the user manual may differ from the actual product. Images shown are for representation purpose only. Other product
logos and company names mentioned herein may be trademarks or trade names of their respective owners

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>