pTron Sonor Wireless Bluetooth Speaker User Manual

pTron Sonor Wireless Bluetooth Speaker

Buttons & Slots Description:

1. Volume Up/Next Song
2. Multi-Function Button (MFB)
3. Voume Down/Previous Song
4. Modes
5. Light On/Off
6.  TF Card/Micro SD Card Slot (max. support 32G)
7. 3.5mm Aux Cable Port
8. USB Drive Slot (max3 support 32G)
9. Micro USB Charging Port DC5V
10. Power On/Off Slider

Important:
pTron Sonor is set at 60% default volume. Please adjust the volume through the key panel on speaker. Music playback time depends on the music style and music volume.

Power On & Pairing: 

1. Power On the speaker by sliding the power key towards the left side.
2. Blue LED light will start blinking near to the charging port.
3. Open Bluetooth function on your Device and Search for the Available Bluetooth devices.
4. Click on ‘pTron BT Speaker’ to connect.
5. After getting connected with the device, LED light will be steady.

Power Off:
Power off the speaker by sliding the power key towards right side.
Note: If there no device paired within 2 minutes, speaker will turn off automatically.

Bluetooth Connectivity – Automatic:
Just Turn On the Speaker. It will Automatically Connect to the Last Connected Device. Note: The last connected device must be on and the Bluetooth function must be active.

Modes: There are 4 modes.

1. Bluetooth Mode
2. Play by TF card
3. Play by USB Drive
4. AUX Mode
   Note: TF card mode/3.5mm Aux mode/USB drive mode will get active when the corresponding device is inserted into the corresponding port/slot.

Call & Music Functions:

• Answer/Hangup a Phone Call: Press MFB Once

• Reject a Phone Call: Press MFB for 2 seconds

• Music Play/Pause: Press MFB once

• Next Song: Press “+” button once

• Previous Song: Press “-” button once

• Volume Up: Long Press “+” key

• Volume Down: Long Press “-” key

• Re-dial: Press MFB Twice in Standby mode

• Modes: Press the’ M’ key once for Bluetooth & radio mode.

• Face Light: Press light button to turn of the face light.
  Note:

  1. MFB stands for Multi-function Button (Play/Pause button is MFB).
  2. In radio mode, connect micro USB charging cable or Aux cable to the speaker to get better radio signal.

Charging the Speaker:

1. Connect the Micro USB cable to the speaker.
2. Connect the USB end of the Charging cable to a Power Source such as USB Charger or other Charging Devices of 5V Output.
3. Red LED light will be Steady during Charge.

Troubleshooting Scenario:

Connectivity Issue:

1. Turn OFF the Speaker and charge 100%.
2. Unpair with the connected Bluetooth device.
3. Restart the Bluetooth device.
4. After 100% charging switch ON the speaker and pair it with the Bluetooth device again.

Warranty

Manufacturing defects in materials and workmanship of the product ONLY. This warranty applies when the product is used under normal conditions and the purpose for which the product was designed.

Disclaimer:
The colors and specifications shown/mentioned in the user manual may differ from the actual product. The images shown are for representation purposes only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>