Guardian Pro XP Performance
Gaming Monitor
User Guide

CONTENTS

1. G240 Guardian™
2. USB 3.0 Cable
3. HDMI Cables| 4. DC Power Cable
5. AC Extension Cable
6. User Guide
---|---

SPECIFICATIONS

Model: G240QHD
Marketing name: Guardian™
Panel: 23.8” Wide Color LCD – IPS
Resolution: 2560(H) x 1440(V)
Frequency: 60 Hz
Screen finish: Anti Glare
Brightness: 300
Display color: 16.7M colors (RGB 6-bits+Hi-FRC data)
Audio: Stereo Speaker 9W (2), Stereo Headphone jack 3.5mm (2)
Dimension: 23.45” w x 16.9” d x 4.79”H
Weight: 21.8 lbs (9.9 kgs)
Input: HDMI 1.4 (1), USB 3.0 (1)
Output: HDMI 1.4 (1) , USB 3.0 1.8A (1), USB 3.0 0.9A (2)
Compatibility: XBOX ONE®S, XBOX ONE®X, PS4®, PS4 Slim®, PS4 Pro® and Select Micro ATX PC

IO PORTS

1. • 3x USB 3.0 Hub. Charge your USB devices when Guardian™ is powered up.
• Audio Out x 2
2. HDMI out
3. USB 3.0 Passthrough: Connect to the USB outputs on the rear side of your console.
NOTE the USB Cable provided with your Guardian™ needs to be connected to the rear side of the console and the USB port on the IO panel.

OPERATION

| Power ON/OFF (Standby) Red: Stand By Mode White: Power On Mode Press to Turn ON/OFF the Monitor. IO Ports are still powered in Off Mode.
---|---
| Menu Bring up Monitor Menu and Exit the Menu or Submenu
| Input select and Enter  Enter Submenu and Select Desired Setting
| Volume +
and Scroll Up Select Up and Navigate in Submenu, Increase volume
| Volume –
and Scroll Down Select Down and Navigate in Submenu, Decrease Volume
| Brightness +
and Scroll Up Select Up and Navigate in Submenu, Increase Brightness
| Brightness –
and Scroll Down Select Down and Navigate in Submenu, Decrease Brightness

OPENING PROCEDURE

1. Place your Guardian™ on a flat clean surface.
2. Grip the outside edge of both left and right side. Use your thumbs to slide the latches outwards to unlock.
3. Lift open the Guardian™ lid in one smooth motion.

CONSOLE INSTALLATION

1. Unscrew the 2 front thumb screws.
2. Remove the cage by lifting the front up and forwards until the the 2 rear hooks are released then lift away.| 1) Unfasten the console straps.
2) Position your console on the base. Refer to the in mold graphic on the base to fit your console type.
3) Cinch both straps to firmly secure game console.
! – ENSURE PROPER SEATING OF YOUR CONSOLE AND TIGHTEN STRAPS BEFORE REATTACHING CAGE.
---|---

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus.
15. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
16. For proper ventilation, maintain 2” of clearance around your PGE.
17. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table cloths, curtains, etc.
18. No naked flame sources such as lighted candles; should be placed on the apparatus.
19. When the main power is disconnected from the PGE, your connected devices will still be readily operable.
20. Use in the recommended operating environment specified below to prevent overheating.
    • Maximum altitude without pressurization: 3048 m (10 000 ft)
    • Temperature
    – At altitudes up to 2438 m (8000 ft)
    – Operating: 5.0°C to 35.0°C (41°F to 95°F)
    – Storage: 5.0°C to 43.0°C (41°F to 109°F)
    – At altitudes above 2438 m (8000 ft)
    Maximum temperature when operating under the unpressurized condition: 31.3°C (88°F)
    • Relative humidity:
    – Operating: 8% to 95% at wet bulb: 23°C (73°F)
    – Storage: 5% to 95% at wet bulb: 27°C (81°F) 21) If possible, place device in a well-ventilated and dry area without direct exposure to  sunshine. AC Adapter User only power supplies listed in the user instruction Adapter Model

    DA-90J19 Made By: Asian Power Devices Inc

REGULATORY COMPLIANCE – Notice for FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation Modifying the equipment without G.A.E.M.S’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES003.

EU DECLARATION OF CONFORMITY
G.A.E.M.S. Inc. declares the product described within this user guide or manual is in compliance with below applicable directives.
The full text of the EU Declaration of Conformity is available at the following internet address: https://gaemspge.com/mediakit or the CE DoC can be found within this user manual

• EMC Directive 2014/30/EU
• Low Voltage Directive 2014/35/EU
• RoHS2 Directive 2011/65/EU, amendment 2015/863
• WEEE Directive 2012/19/EC
• Packaging & Packaging Waste Directive 94/62/ EC
• REACH Directive 1907/2006/EC

WEEE INFORMATION
User information for consumer products covered by EU
Directive 2012/19/EU on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of G.A.E.M.S products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:
For Consumers in the European Union: This EU Directive requires that the product bearing this symbol and or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
It is your responsibility to dispose of this and other electrical and electronics products via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.
For more detailed information about the disposal of your unwanted product, please contacts your local authorities, waste disposal service, or the shop where you purchased the product.

SAFETY NOTICE
WARNING: Do not use this product near water, for example, in a wet basement or near swimming pool or in an area where accidental contact with water or liquid might occurs
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from the surge caused by lightning WARNING: The external power adapter or AC power cord is the equipment’s disconnection device. The power outlet must be located nearby the equipment and its access must be easy.
WARNING: For indoor use only

GAEMS, Inc.
2517 152nd Ave NE, BLDG 16 Redmond, WA 98052 1-855-754-2367
support@gaemspge.com

Trademarks shown are the property of their respective owners. Images used are for illustration purposes only. GAEMS, M155, M240, Vanguard, Sentry, PGE, M270, Sentinel, Guardian™ and other GAEMS trademarks are the intellectual property of GAEMS, Inc. Product features, appearance and specifications are subject to change without notice. HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. AMD® and FreeSync™ are trademarks of Advanced Micro Devices, Inc. in the United States and/or other jurisdictions. © 2019 GAEMS, Inc. All rights reserved. Patent Pending.

SAFETY INSTRUCTIONS & WARNINGS

| Use only as described in this manual.
---|---
| Unplug when not in use and before closing the lid.
| Turn off before unplugging.
| Securely strap down before traveling.
| For indoor use only.
| support@gaemspge.com
1-855-754-2367

| Do not pull or carry by power cord.
---|---
| Do not handle plug or G240 with wet hands.
| Keep all cords away from heat.
| Do not block any ventilation.
| Avoid pulling cord around sharp edges.
| Do not unplug by pulling on cord.
| Do not use damaged cord or plug.
| Do not disassemble.
| Only clean with a dry cloth.
| Do not throw your G240.
| Do not use near water or moisture.

CONSOLE INSTALLATION

1. Align the rear hooks and insert into the Guardian™’s lower cabinet.
2. Tighten down the Thumb Screws until the console is firmly held in place.
   ! – Ensure console cage is properly secured and thumb screws are tight before closing the lid and transporting.

ACCESSORY BAG – POWER CABLES STORAGE

• Remove Accessory Bag during operation to ensure proper console ventilation.
  Failure to remove Accessory Bag can cause damage to console and or Guardian™.

• Cables that come with Guardian™ have to be stored inside the Accessory
  Bag and properly strapped in during transportation to avoid damage to your Guardian™.
  ! – Do not overpack accessory bag. Overpacking could damage the left side of the screen and will void product warranty.
  ! – Only place the accessory bag with the GAEMS logo face up

CONTROLLER STORAGE

Your Guardian™ is designed to hold one controller (PS4 or Xbox).
! – Ensure controller is properly strapped into the controller dock before transportation.

DECO COVER

Place your Guardian™ on a flat level surface.

1. Press to unlock the deco cover.
2. Pull deco cover upwards with both hands at the bottom corners
   *available at www.GAEMSpge.com

PICATINNY RAILS

DISCLAIMER

• Use only recommended GAEMS
  Picatinny accessories

• GEAMS is not responsible for damage or harm cause by mounting items that are heavier than Guardian limitation

• GAEMS is not responsible for damage or harms cause by improper installing Picatinny accessory mount

• Universal Picatinny mounts by other manufacturers must meet or exceed Picatinny patent industry standards for supported use, accessories weight must not exceed 7 lbs.

WARNING
Remove all Picatinny accessories before removing console from your Guardian™, to prevent tipping that can damage your Guardian™ See more at www.GAEMSpge.com for mounting additional hardware (Action Cams, Mobile phones, lighting accessories and more…)

WARNING Follow all operating procedure on this sheet. Failure to do so may result in voiding your warranty.

Remove Accessory Bag during operation to ensure proper console ventilation. Failure to remove Accessory Bag can cause damage to console and or Guardian™.

Cables that come with the Guardian™ have to be stored inside the Accessory Bag and properly strapped in during transportation to avoid damage to your Guardian™.
! – DO NOT OVERPACK ACCESSORY BAG. OVERPACKING COULD DAMAGE THE LEFT SIDE OF THE SCREEN AND WILL VOID PRODUCT WARRANTY.
! – ONLY PLACE THE ACCESSORY BAG WITH THE GAEMS LOGO FACE UP

Position your console on the base. Refer to the in mold graphic on the base to fit your console type.
! – ENSURE PROPER SEATING OF YOUR CONSOLE AND TIGHTEN STRAPS BEFORE REATTACHING CAGE.

! – ENSURE CONTROLLER IS PROPERLY STRAPPED INTO THE CONTROLLER DOCK BEFORE TRANSPORTATION.

! – ENSURE CONSOLE CAGE IS PROPERLY SECURED AND THUMB SCREWS ARE TIGHT BEFORE CLOSING THE LID AND TRANSPORTING.

UNPLUG POWER CABLE FROM THE OUTLET, UNPLUG USB AND HEADPHONES CABLES FROM MEDIA CENTER BEFORE CLOSING THE LID AND TRANSPORT THE GUARDIAN™.

GAEMSpge.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>