Srhythm NiceComfort 35 (NC35) Headphones User Manual
- June 9, 2024
- Srhythm
Table of Contents
Nice Comfort 35 (NC35) Headphones
User Manual
Safety instructions
Hearing safety:
- Headphones can’t be used during charging for your safety.
- DON’T use the headphones for any other purpose while driving.
- Please use cautiously and stop using headphone in dangerous situation.
- Please do not listen for a long time at high volume to avoid hearing damage.
- For your safety,please do not turn the volume too high while running outside to ensure that you can hear sound in your surroundings.
- Clean only with a dry cloth.
Operation Safety:
- Use original or certified cables for charging and voltage within 6.3V.Power will be cut off and start protection mode when the voltage exceed 6.3V and within 6V.Headphone will be broken when the voltage over 36V.
- Keep away from children to avoid danger from improper use.
- Avoid dropping headphone and operating in the extreme temperature. Please use headphone within operation temperature range: 32° F (0°C) – 113° F (45°C).
- Do not submerge headphone in the water.
- Do not use corrosive cleaner/oil to clean headphone
- Turn off headphone Bluetooth and ANC function to save power when you do not use headphone.
What’s in the Box
At a Glance
How to Use
Use ANC Function
| Press the ANC Button to turn Active Noise Cancellation ON/OFF (the LED
indicator light will be green when ANC ON.)
---|---
Use Bluetooth Function| 1.Hold the Multi-function Button for 3-5 seconds
to turn headphone Bluetooth on,then enter pairing mode.(the LED indicator
light will
be blue and red flashing quickly.)
2.Start your mobile phone Bluetooth and find headphone Bluetooth pairing name
“Srhythm NC35” to click it to pair.(the LED indicator light will be blue
flashing slowly after paired successfully.)
3.Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth
off.
---|---
| Press to adjust volume. Long press to skip to next/previous song.
| Long press the Volume Up and Volume Down Buttons for 5 seconds to clear the
pairing.
| Press the Multi-function Button to play/pause music or answer/end call.
| Double-press the Multi-function Button to Reject an incoming call or Dial
out the last call.
| Press the Multi-function Button three times to turn on/off the low-latency
game mode.
Function Details
Easy Pairing
- Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth on, then enter pairing mode.(the LED indicator light will be blue and red flashing quickly.)
- Keep headphone and your mobile phone as close as possible during pairing process.
- Turn on your mobile phone Bluetooth. Search for headphone Bluetooth signal on mobile phone and click “Rhythm NC35” to pair.(the LED indicator light will be blue flashing slowly after pairing successfully.)
- If you are asked for a password/PIN code during pairing procedure, please enter “0000” (four zeros).
Pair to the Second Bluetooth Device
- Please make sure that headphone is connected to the first Bluetooth device successfully and music is not playing.
- Hold the Multi-function button until the headphone switch off and continue with the steps “Easy Pairing”(Let the headphone re-enter pairing mode, the LED indicator light will flash blue and red alternately).
- Pair headphone with the second device according to “Easy Pairing” steps.
- Return to the first Bluetooth device and pair it with headphone again. Now both of your devices are paired with headphone.
Active Noise Canceling(ANC) ON/OFF
To turn on ANC, press the ANC Button; (the LED indicator light will be green
when ANC ON.)
To turn off ANC, press the ANC Button; (the LED indicator light green color
will be off when ANC OFF.)
Wired Mode
Headphone support AUX input for wired external audio source connection. Simply
turn headphone Bluetooth off and plug in the audio cable. For any ANC
Bluetooth headphone, it is still need battery power support for wired mode.
ANC also works in wired mode. Microphone only works in Bluetooth modernity for
wired mode. Buttons can’t be used in wired mode (Except the ANC Button).
Voice Dialing
Press both “Volume Up” and “Volume Down” buttons simultaneously to activate
voice dialing function(compatible with iPhone Siri and selected Android voice
dialing software). How to Wear Airplane Adaptor Connection Connect the
Airplane Adaptor to audio socket(double holes) of aircraft seat, use Type-C
audio cable to connect with your headphone and Airplane Adaptor.Warning:
Only use for airplane, Can not be plugged into the power socket
Headphone Specification
LED Indicator Light
-
Pairing: Blue and red lights flash alternately
-
Paired: Blue light flashes
-
Playing: Blue light slowly flashes
-
Charging: Red light turns on
-
Full Charge: Red light turns off or Blue light turns on
-
Battery Low: Red light turns on with voice prompt
-
ANC ON: Green light turns on
-
ANC OFF: Green light turns off
-
Bluetooth OFF: Blue and red lights turn off
-
Please kindly note that perhaps sometimes these LED indicator light color will be mixed to become other colors(pink,purple,etc.) occasionally.
Technical Specification- Product name: Rhythm NC35
- Battery capacity: 1000mAh
- Input: 5V/1A
- Chip: ATS3015
- Charging time: About 1-2 hours
- Use time: 50 hours
- Bluetooth version: V5.0
- Bluetooth profile: A2DP, AVRCP, HSP, HFP
- Bluetooth range: 10m/33ft
- Waterproof rating: IPX4
- Net weight: 180g
- Impedance: 32 Ω
- Driver diameter: Φ40mm
- Frequency response: 20–20KHz
Charging
Use the included Type-C charging cable to connect to headphone Charging Port.
Connect the other end of charging cable to a computer USB port or USB wall
charger under 6.3V voltage. Turn off headphone Bluetooth and ANC function
before charging. Headphones can’t be used during charging for your safety. The
LED indicator light will be off or blue color when full of charge basing on
headphone turn off status. Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name “Rhythm NC35” to click it to pair.(the LED
indicator light will be blue flashing slowly after pairing successfully.)
Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth
off.
NOTE: Ambient temperature exceeds the charging temperature range of 32° F
(0°C) – 113° F (45°C).
If any issues, here tips for you:
- Full charge your headphone with original USB-A to USBC charging cable ( not USB-C to USB-C cable)and 5-10W power wall charger (don’t use fast charger).
- Reset headphone by inserting audio cable into headphone audio socket then removing it. Or the upgraded NC35 headphones would be reset automatically when charging.
Delete Pairing: Hold both “Volume Up” and “Volume Down” buttons simultaneously for 5 seconds.
Q&A
1. Q: Why can’t headphone pair with my mobile phone?
– A: Please check if your headphone is in pairing mode or reconnection mode, check if Bluetooth search function of your Bluetooth device is turned on, if all done, then go to Bluetooth menu of your Bluetooth device, delete/ignore the headphone Bluetooth pairing name “Rhythm NC35”.After that, you can try to reconnect Bluetooth according to above “Easy Pairing” steps.
2. Q: Why can’t headphone turn on?
– A: Please double check the battery status of your headphone
3. Q: Can I replace battery in the headphone?
– A: Noyau can not. Headphone uses a built-in non-detachable Li-Polymer battery that can’t be replaced.
4. Q: Can I use headphone while driving?
– A: For your safety, we strongly recommend that you do not use headphone while driving to avoid distraction.
5. Q: Why does headphone sometimes disconnects with Bluetooth device within 10 meters?
– A: Please check if there are any metal materials or obstacles within a relatively close range or your surroundings that perhaps interfering with Bluetooth connection. This may happen because Bluetooth is a radio technology which is sensitive to objects between headphone and other devices. Delete the Bluetooth pairing name on your ALL devices(it will toggle between your connected devices due to multi-point connection),restart it. then reset your headphone by inserting the included audio cable into headphone audio socket and removing it(sometimes need to insert several times to reset successfully),then reconnect it.
6. Q: Why can’t I hear any sound from my computer or mobile phone?
– A: Please check if output channel of your computer supports A2DP profile. Also check the volume settings on your headphone and computer/mobile phone.
7. Q: Why am I unable to use headphone to control the volume of a track playing on an APP on my mobile phone?
– A: Due to configurations of different application software, headphone may not be completely compatible with some APPs.
8. Q: What do I do if Bluetooth can not close or open?
– A: Please reset Bluetooth function of headphone by inserting an audio cable into headphone audio port, then removing it.Before re-connecting, kindly remember to delete/ignore headphone bluetooth pairing name “Rhythm NC35” on your mobile phone.
9. Q: Why does Bluetooth turn off when I connect an audio cable?
– A: This is one of our special features. When users insert an audio cable into headphone audio port, all Bluetooth feature buttons stop working and Bluetooth turns off. But, Bluetooth will be available again when audio cable is moved.
10. Q: Why can’t I turn headphone on/off?
– A: Please note that ANC and Bluetooth are indicated by the same LED indicator light(but different light color), with a green light for ANC and a blue light for Bluetooth. If you need to turn Bluetooth on/off, you can turn off ANC firstly in case that you make confused by the color lights. But you will be very familiar with the light color meaning after using few times because it is simple and easy.
11. Q: Why does audio quality become poor on Windows PC?
– A: Some customers have mentioned poor audio quality on Windows PC. Please
note that there are “Headset” and “Headphone” modes you can toggle by changing
your output device. Selecting “Headphone Mode” will drastically improve the
audio quality.” Headset Mode” is designed for highly compressed VOIP
calls,etc.That’s not the fault of headphone product, that’s just the
limitation of that protocol.
If you are in “Headphone Mode”, the audio quality is fantastic.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with
distance ＜5mm between the radiator& your body.
ISEDC warning
This device complies with Innovation, Science, and Economic Development Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>