Biral A 12 Circulation Pumps User Manual
- June 9, 2024
- Biral
Table of Contents
A 12 Circulation Pumps
User Manual
A 12, A 13, A 14, A 15, A 16, A 401, A 500 AD 401
A 12 KW, A 13 KW, A 14 KW, A 15 KW, A 16 KW, A 401 KW, A 500 KW AD 401 KW
AW 15, AW 16, AW 401
Safety information
General remarks
These installation and operating instructions contain items of information of
fundamental importance which must be taken into account during assembly,
operation and maintenance.
They should therefore be read without fail before installation and
commissioning by the fitter and also the responsible specialist
staff/operator. They must always be available for consultation at the plant’s
place of deployment.
Not only are the general safety hints included in this «Safety Hints» section
to be observed, but also the special items of safety information included in
the other sections.
1.2 Identification of notices
The safety information contained in these install lotion and operating
instructions, non-compliance with which can lead to danger for people, are
specially marked with the general danger symbol «Safety sign according to DIN
4844-W9».
This symbol is a warning of dangerous electric voltage. «Safety sign according
to DIN 4844-W8».
Warning You will find this symbol in the case of safety information non-
compliance with which can endanger the machine and its functions.
Information signs mounted directly on the plant, such as, for example
– rotating direction arrow
– symbols for fluid connections must be obeyed without fail and be kept in a
fully legible state.
1.3 Staff qualification and training
The staff deployed for assembly, operating, maintenance and inspection tasks
must show that they have the appropriate qualifications for such work. The
field of responsibility, competence and supervision of the staff must be
stipulated exactly by the operator.
1.4 Risks in the event of non-compliance with the safety information
Non-compliance with the safety information can result in both danger for
persons and also for the plant and the environment. Non-compliance with the
safety information can lead to the loss of claims for damages of any kind.
In detail, non-compliance, for example, may result in the following risks:
– failure of important functions in the plant
– failure of prescribed methods for servicing and maintenance
– danger to persons through electrical and mechanical causes
1.5 Safety-conscious work
The safety information contained in these installation and operating
instructions, the existing national regulations for the prevention of
accidents, as well as any internal working, operating and safety regulations
stipulated by the operator must be observed.
1.6 Safety information for the operator/operating personnel
Any risks from electric power must be eliminated (For details see, for
example, the regulations published by NIN (CENELEC) and the I.E.E.).
1.7 Safety information for installation, maintenance and inspection works
The operator has to ensure that all installation, maintenance and inspection
works are carried out by authorised and qualified specialist personnel who
have informed themselves adequately about the requirements by a thorough
study of the installation and operating instructions.
Basically, any works on the plant should only be carried out when it is at a
standstill and not carrying any electrical current.
Directly after completion of the works, all safety and protective
installations must be mounted or activated again.
Before re-commissioning, the points listed in the section «Electrical
connection» must be observed.
1.8 Unauthorised reconstruction and production of spares
Reconstruction of or changes to pumps are only permissible after consultation
with the manufacturer. Genuine spare parts and accessories authorised by the
manufacturer serve the cause of safety.
The use of other parts can cancel any liability for the resultant consequences
of this.
1.9 Improper operating methods
The operating reliability of the pumps supplied is only guaranteed with
appropriate application of the section «Intended application» of the
Installation and Operating Instructions. The limit values given in the
technical data must not be exceeded on any account.
Transport/storage
The pumps are delivered ex works in suitable packaging.
Birla AG Süd Strasse 10
CH-3110 Meiningen
T +41 31 720 90 00 F +41 31 720 90 10
E-Mail: info@biral.ch
www.biral.ch
www.biralcampus.ch Biral GmbH
Kesselsgracht 7a
52146 Würselen
T +49 2405 408070 F +49 2405 40807-19
E-Mail: info@biral.de
www.biral.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>