Akscruid Q63-3 Ear Buds Wireless Bluetooth User Manual
- June 9, 2024
- Akscruid
Table of Contents
Akscruid Q63-3 Ear Buds Wireless Bluetooth
If you have a quest ion that is not listed please do not hesitate to contact
us by ema Customer Service Department email address.
after-service@kinganda.cn
Product Introduction
- Cal1/hang up (One click)
- Rejected (Twice click)
- Play Music (One click)
- Pause music (One click)
- Previous song press 2S Next song Long press 2s)
- Power on (long press 3S) Power off (long press s)
Wipe sweat left on earphones after exercise to avoid electrolysis reaction
Note: When using the headset for the first time, tear off th¢ clear
insulating sticker attached to the left and right headset charging contact
points before putting the headset back in the box. Take it out again and it
will turn on automatically.
Package Contents
- Charging case*1
- Headphones*2
- Instruction manual
- USB cab le*1
- Ear caps*4
If
your ears hurt when you put on the earphones, change to another type of
earpiece.
Operation instructions
Manual power on/off
- Power on: long press 3s Blue light blinking that is on)
- Power of: long press 5S Red light blinking that is of)
Calling Features/Calls
- Cal/End: Press M FB once.
- Reject: Press M FB twice.
- Redial: Press M FB twice.
- Sir Cal: Press and hold the M FB button for2 seconds
Listening to song
- Play/pause music: Press M FB once.
- Previous song press +”for2 seconds)
- Next song (pressfor2 seconds)
Mono/Dual mode
- For the first tin e use, p lease rem either era from the charging case.
- Open Bluetooth and search for Bluetooth.
- Search for the name of the Bluetooth device “YYK-463” to connect.
Place the other one in the case as it is. Or tum off the power. otherwise, it w 1llnotbe in one ear mode.
Binaural mode
Automatic: Remove from charging case and it will automatically turn on and
connect to Bluetooth device.
Manual: Press and hold the left and right earphone buttons for B seconds
to power on and connect to bluetooth device.
YYK-Q63 in the list of Bluetooth devices on your phone. Enter pairing voice will present the word “Continue, ” and the indicator light will al treating blue flashes and then goes out, indicating success to continue.
As soon as the earphones are placed in the charging case, they turn off. It will then begin charging. Once the earbuds are removed from the case, they will immediately turn on and automatically pair and connect to a paired Bluetooth device.
Reset pairing
Using the one-ear mode will deactivate the binaural mode. If the binaural pair
is removed by mistake, please follow the procedure below t0 reset the pair.
Phenomenon of binaural pair removal After startup, the red/blue lights flash
respectively and the phone displays two identical device names; it is not
possible use two earphones at the same time. Solution: You need to reset the
dev1ce manually.
- Tum off the Bluetooth function of your phone. Before taming off, please cancelable previously connected Cancelable the previously connected device names YYKQ63″.
- Remove the left an d right ear phones from the case and manually press and hold the button for5 seconds to pow effort.
- With the device shut down, manually press and hold the multi-function button on the left and right ear phones for10 seconds. Press and hold for 10 seconds. After the red and blue lights flash twice.
- Put the left and right ear phones back in to the charging case and check if the charging m ode is activated.
- Remove the left an d right ear phones from the charging case at the same and connect them to your phone.
FAQ
Bluetooth not found
- The Bluetooth communication distance is 10 m. Make sure there no obstacles in between and the distance to the smart phone. Smartphones and earphones should be used in close proximity. h Other smartphones or devices may already be connected to the earpiece. If this is the case, first release the bearing with the smartphone/device.
- If the connection problem has not been resolved, try rebooting Bluetooth device and resetting the earphones. to it on. It will automatically shut down.
- If the earphones do not find the device within 5 minutes.
- When connecting to another phone, the earpiece must first sea for the previously connected device and then wait for about 2 mint.
Charging problems
- Make sure that there is no problem with the charging cable adapter for charging, and that the charging cable is inserted correctly.
- There is a possibility of poor contact. Press the left and earphones with your fingers, and make sure the charging contact points of the left and right earphones are fully connected to charging case.
- The charging contact points on the left and right earphones have dirt, dust, or sweat on them. Wipe with a cloth.
- When you hear the Battery low message, please charge the earphones. When the LED display on the case reaches the number 10, please charge the case. Please be careful not to out of power in the earphones and charging case. This may shorten the life of the built-in lithium battery. built-in 1ithium battery may shorten the usage life of the earphones.
Automatic shutdown
Please make sure that the earphones are fully charged. In add please make sure
that earphones wilt automatically shut donator Bluetooth is disconnected. In
this case, please them back in the charging case or press and hold the button
for 2 seconds to turn on the power.
Only one headset has sound
Reset the earphones and restart your smartphone. Delete the Bluetooth connection history of the smartphone, and then search and try paring again. If the problem persists, p lease try the following steps.
- Remove the left and right ear phones from the charging case and press and hold the multifunction button forabout5 seconds to tum off the hones.
- Manually press and hold the multifunction button on the left and right earphones for 10 seconds until the red and blue lights tum on twice and re lease your finger.
- Put the left and right earphones back into the charging case and check to see if the charging m ode is activated.
- Remove the left and right earphones from the charging case at the same tm e. o. delete the connection again.
When the sound is intermitter
- Check to see if the smartphone s Internet connection is work properly or if the songs are still downloading due to slow Inter connection speed.
- Check that the smartphone is not connected to two audio 1evices at the same time. Press the multifunction button twice switch the connection.
- The Bluetooth transmission range is 10 meters. Make sure that there are no obstacles in between and that the smart phone is far away from the earpiece. Keep the smartphone and earphones close to each other.
- There may be too much radio interference or a strong magnetic field in the surrounding environment. These environments can affect Bluetooth communication.
- Open the Bluetooth interface menu of the smart phone, click “Unpair” to delete the pairing history, and then search for and the smart phone again.
- Reboot the smart phone to reset the earpiece.
Parameter Specification
Attention
- Do not handle this product roughly. Do not eject heavy objects Intisar phones, and do not place the earphones in a high temperature and humidity environment.
- Do not place this product in the presence of WIF1, routers or the frequency transmitting equipment.
- Use this product in an effective environment (10m) and ensure that are no entity obstacles between the Bluetooth device and the earphones (e. g. walls).
- Please charge this charging case using a legitimate charging facility 5. This earphone is compatible with any Bluetooth device.
- If you do not use it for a long time, please recharge it before use.
Safety Precaution
The following instructions are to be observed in order to prevent injury to
the user or others and damage to property. Please read the text after
carefully understanding the contents of the indications and symbols described
here, and be sure to observe them.
The following symbols classify and explain the degree of harm or damage to
humans that may occur if the product is used incorrectly and the contents of
the labeling are ignored.
-
Dangerous
A threat of imminent danger of death or serious injury. -
Warning
Any item that could result in death or serious injury. -
Note
Maybe cause injury or property damage.
The following pictorial symbols are used to classify and explain the types of contents to be observed.
Warranty
- If this product fails within 6 months from the date of purchase in of proper use in accordance with the instruction manual, connection examples, and notes, etc., for home use, we will replace it free of charge.
- If the product fails within 6 months from the date of purchase, we replace it free of charge.
- This product is subject to carry-in repair. The customer will be responsible for shipping charges when sending the product to us.
- Please keep this document in a safe place and do not lose it.
Dangerous
Do not short-circuit the terminals. Do not carry or store the product together
with metal necklaces, coins, or other small metal objects as this may cause
fire, ignition explosion. Do not throw the product into a fire or charge, use,
or leave it at high temperature: that do not heat it, as this may cause it to
overheat, catch fire, or explode.
Warning
Never use headphones while riding a bicycle, car, motorcycle, etc. Doing so
may cause a traffic accident. When using the headphones outdoors, be aware of
surrounding traffic. Do not disassemble or modify the headphones. Do not
disassemble or modify the product. Doing so may cause mal function,
overheating, fire, or electric shock. If the USB cable is not plugged in
securely, it may cause fire or electric shock Do not touch the main unit or
USB cable with wet hands. Do not give a strong shock or throw the product.
Doing so may cause fire, burns, or injury. Do not leave within the reach of
children or infants, who may accidentally swallow the earphones or earpieces.
Note
Use and store the product in a place with little moisture or dust as it may
chaise generation, ignition, or electric shock. When using this product, do
not raise volume too high. Using the product at a loud volume that irritates
the ears for period of time may adversely affect hearing. If the volume is
turned up too high the beginning, a sudden loud sound may irritate your ears,
turn up the volume zoite, gradually. Do not cover the unit with blankets or
clothing while charging or using it. . Doing so may cause overheating or fire.
DO not use the product if the USB cable is damaged or the terminals are loose,
| as may cause fire or electric shock. Do not use the product near a fire or
stove, in a car, in the bathroom, or in any place subject to high temperatures
or high humidity. Doing so may cause overheating, fire, or explosion.
Warranty measures
l or 6 months long warranty period s2. Warranty does not apply to malfunctions
caused by failure to follow the instructions for use. Please note that the
warranty does not cover any damage caused by failure to follow the
instructions for use.
- Warranty measures:
- Warranty Number: .
- User Name:
- Phone Number:
- Address:
- Time of Purchase eat Receipt Number:
- Condition Seller Name:
- Vendor Address:
- Edition Store
- Phone Number:
- HPailure Description:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>