UXD BT-01 Wireless Headphones User Guide
- June 9, 2024
- UXD
Table of Contents
UXD BT-01 Wireless Headphones
Product introduction
❶ volume+/ next track
❷ multifunction button
❸ microphone
❹ volume-/previous track
❺ LED indicator
❻ power on/off
❼ Micro USB charging port
Package Contents
- 1 x BT-01 Wireless Stereo Headphones
- 6 x ear hooks (two on the earphones
- 1 x USB charging cable
- User Guide Scan Card
- 6 x earbuds (two are fitted on the earphones)
Instructions
Charge
Enter pairing device mode
- Make sure the headset and your Bluetooth device are next to each other (within 3 feet/I meter).
- When using the headset for the first time, press and hold until the LED indicator flashes alternately red and blue. The headset is now in pairing mode
- Activate the Bluetooth® function of the mobile phone and search for nearby Bluetooth® connections: find “BT-01” in the search results and click the name to connect. 0 nee connected, only the LED indicator will flash blue.
button control
power on/off| Press(!)and hold for 2S until the green light fl, shes 3 ti mes
to power on.
Press(!)and hold for 3S, the red light flashes 3
---|---
Play/ Pause/Answer/Hang up call| press once
reject the call| Press and hold for 1.5 seconds
volume+ / –| Press
previous/ next song| Press and hold
redial| Press twice
Activate voice control| Press and hold for 1 second
Notice
Bluetooth headsets can remember previously paired devices.
In any state after power on, press hold V+/V- key (3 seconds) to restore the
original factory settings. After restoring the original factory settings, the
headset will enter the airing mode, and the red and green lights will flash
twice (the call state does not allow to restore the factory settings)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>