China Etech Groups 19581 True Wireless Earbuds User Manual
- June 5, 2024
- China Etech Groups
Table of Contents
True wireless earbuds
User Manual
True wireless earbuds with a charging case
ADDITIONAL
Congratulations on your True wireless earbuds.
These BT earbuds allow you to enjoy your music without wires.
Please read this manual before use.
NOTICE:
- Keep the product dry; do not place the product in damp places
- Keep out of direct sunlight and high temperatures High temperatures may result in damage
- Keep out of cold temperatures, this will help to avoid internal damage
- Do not disassemble the product
- Avoid dropping the headphones
- Do not continue to charge the headphones over 10 hours
- When charging using the Micro USB charging cord that came with the headphone
PACKING LIST
| |
---|---|---
True wireless earbuds ×1| Micro Charging cable ×1| User
Manual×1
1- Earbuds
2- Charging case
3- Charging indicator
4- On/Off button
FUNCTION KEYS
USING INSTRUCTION
- Turn on both earbuds by holding their power buttons down after the indicator flashes in red /blue color for 1-2 seconds.
- Activate your pairing device’s BT mode.
- Search for “BPM Sound Pods” and select it to connect.
- After the connection is successful, the earbud’s light will be off.
SPECIFICATIONS:
| Frequency range (Hz-kHz) | 20Hz – 20 KHz |
|---|---|
| Continuous playing time | 2-3 hours |
| Charging time | 1.5 hours |
| Battery capacity Earbuds : | 30 mAh |
| Battery capacity Charging station | 200 mAh |
| Mic function : | yes |
| Answer phone call : | yes |
| BT version : | 5.0 |
INDICATOR LIGHT STATUS
| Pairing Mode | The light flash in red/blue color |
|---|---|
| Working | The light is off |
| Earbuds Charging | The solid red light is on |
| Earbuds Full charging | The red light is off |
| Case Charging | The light flashed red slowly |
| Case Full charging | The solid red light is on |
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
nterference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet the general RF exposure statement.
The device can be used in portable exposure conditions without restriction
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC ID:2AS5O-19581.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>