cecotec BIGTOAST DOUBLE Тостер/ Toaster Instruction Manual
- June 9, 2024
- cecotec
Table of Contents
- cecotec BIGTOAST DOUBLE Тостер/ Toaster
- Product Information
- Parts and Components
- Technical Specifications
- Product Usage Instructions
- Cleaning and Maintenance
- Disposal of Old Electrical Appliances
- Technical Support Service and Warranty
- SAFETY INSTRUCTIONS
- PARTS AND COMPONENTS
- OPERATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
cecotec BIGTOAST DOUBLE Тостер/ Toaster
Product Information
BIGTOAST DOUBLE Toaster
The BIGTOAST DOUBLE toaster from Cecotec is an efficient and easy-to-use appliance that can toast two slices of bread at the same time. It comes with a range of features that make it an ideal choice for your breakfast routine.
Parts and Components
The toaster comes with the following parts
- Two slots for toasting bread
- A power cord for connecting to an electrical outlet
- A lever for lowering and raising the bread slices
- A temperature control knob for selecting the level of toasting
- A crumb tray for easy cleaning
Technical Specifications
- Model Number: 03084
- Product Name: BIGTOAST DOUBLE Toaster
- Power Consumption: 840-1000W
- Power Supply: 840-1000W, 220-240V AC 50-60Hz
- Weight: 1.35kg
Product Usage Instructions
BIGTOAST DOUBLE Toaster
Operation
- Place the toaster on a flat and stable surface near an electrical outlet.
- Insert the power plug into the electrical outlet.
- Select the desired level of toasting by turning the temperature control knob to the appropriate setting.
- Lift the lever to open the bread slots.
- Place the bread slices in the slots, making sure they are centered and not overlapping.
- Lower the lever to close the bread slots.
- The toaster will automatically start toasting the bread.
- When the toasting cycle is complete, the lever will automatically release and the bread will pop up.
- Remove the toasted bread from the slots and turn off the toaster by unplugging it from the electrical outlet.
Cleaning and Maintenance
Before cleaning the toaster, make sure it has cooled down and is unplugged from the electrical outlet.
- Remove the crumb tray and empty it of any crumbs.
- Wipe the exterior of the toaster with a damp cloth. Do not use abrasive cleaners or solvents.
- Clean the bread slots with a soft brush or cloth. Do not use water or any cleaning agents.
- Replace the crumb tray and plug the toaster back in.
- Disconnect the appliance from the power supply and allow it to cool down before cleaning.
- Use a soft, damp cloth to clean the product’s surface.
- Do not immerse the appliance in water or other liquid.
- Do not use abrasive scouring pads, powders or cleaners.
- To remove any crumbs inside the device, take out the crumb tray. Do not operate the device without the crumb tray in place.
- To remove any crumbs of bread remaining in the device, turn the device upside down and shake it carefully. Do not insert any hard or sharp objects inside the slot, as this could damage the device.
- Do not wrap the power cord around the outside of the device. Use the cord storage cleats under the device.
Disposal of Old Electrical Appliances
Do not dispose of this appliance with your regular household waste. Please recycle it in accordance with your local recycling regulations.
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose of the appliance correctly. If the product has a built-in battery or uses batteries, they should be removed from the appliance and disposed of appropriately. Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
Technical Support Service and Warranty
If you encounter any issues while using the BIGTOAST DOUBLE toaster, please contact Cecotec’s technical support service for assistance. The product comes with a one-year warranty from the date of purchase.
- This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual.
- The warranty will not cover the following situations:
- The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer.
- The product has been disassembled, modified, or repaired by persons, not authorised by the official Technical Support Service of Cecotec.
- Faults deriving from the normal wear and tear of its parts, due to use.
- The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply.
- If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 963 210 728.
SAFETY INSTRUCTIONS
- Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.
- Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is grounded.
- No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling.
- Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec in order to avoid any type of danger.
- During and after operation, the appliance is likely to get very hot. Use gloves or other convenient protection accessories in order to avoid burns and injuries.
- Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid, nor expose the electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.
- Do not operate the appliance outdoors, on or near a gas or electric hob, in heated ovens or near open flames.
- Do not leave the appliance unattended while in use. Unplug it from the mains supply when you finish using it or when you leave the room.
- Do not use any accessory that has not been recommended by Cecotec, as they might cause injuries or damage.
- Do not use the device near or below curtains or other flammable materials. Do not operate the device under wall cabinets.
- Do not use the appliance if its cord, plug, or housing is damaged, nor after it malfunctions or has been dropped or damaged in any way.
- Do not try to repair the appliance by yourself. Contact the official Technical Support Service of Cecotec for advice.
- Turn off and unplug the appliance from the mains supply when not in use, before cleaning it and before attaching components. Pull from the plug, not the cord, to disconnect it from the outlet.
- Do not twist, bend, strain, or damage the power cord in any way. Protect it from sharp edges and heat sources. Do not let it touch hot surfaces.
- Do not let the cord hang over the edge of the working surface or countertop.
- Do not remove food from the device while it is on and hot.
- Do not insert metal objects or other utensils into the device, as this will cause an electric shock or cause a fire.
- The lever must be lifted before connecting or disconnecting the plug from the wall outlet.
- The appliance is not intended to be used by children under the age of 8. It can be used by children over the age of 8, as long as they are given continuous supervision.
- This appliance is not intended to be operated by means of an external timer or separate remote-control system.
- This appliance can be used by children aged 8 and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, as long as they have been given
- supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
- Supervise young children to make sure that they do not play with the appliance. Close supervision is necessary when the appliance is being used by or near children.
- Do not insert oversized food, metal foil packages or utensils inside the device.
- Do not attempt to remove food from the device while it is still plugged in.
- To disconnect the device, push the Stop button and unplug it from the wall outlet.
- This product is designed only for household use.
PARTS AND COMPONENTS
- 35-mm (maximum width) and 130-mm bread slots (maximum height).
- The slots allow you to bake many different products.
- Elevation-system control lever
- For a 80-mm high slice of bread, the top edge should not be less than 20 mm above the toaster’s surface after the elevation system comes out.
- Button for bagels
- Reheating button
- Defrosting button
- Add extra time to the cycle for toasting frozen bread.
- Stop button
- Toasting-control selector
- Removable crumb tray
- Cord storage
- Pastry holder
OPERATION
Unwind the power cord. Check that the crumb tray is in correctly placed and that there is nothing inside the toaster slots. Plug the power cord into the wall outlet.
- Insert slice(s) of bread inside the device.
- Set the level of toasting
- Turn the toasting-control selector to select the toasting of your toasts:
Browning control setting | Toasting type |
---|---|
1-2 | Light |
2-4 | Medium |
5-6 | Dark |
Toasting the bread
- For slightly dry bread, use a lower setting than you normally would.
- For fresh bread or whole-wheat bread, use a higher setting than normal.
- Breads with uneven surfaces (such as muffins) will require a higher toast setting.
- Thick slices of bread (including bagels or baguettes and muffins) will take longer to toast, sometimes significantly longer, since more moisture must be evaporated for the bread to be toasted. Very thick slices may require two cycles.
- When toasting bread with raisins or with other fruits, remove any loose raisins, etc. from the surface of the bread before putting it into the toaster. This will prevent fruit pieces from falling into the toaster or sticking inside the slot.
- Before toasting bagels/baguettes, slice each bagel/baguette into two equal halves.
Toasting one slice
- For toasting a single slice of bread, set the toasting selector to a lower setting than you normally would. The device is designed to heat both bread slots. By lowering the heat lever for a single slice, you will not over-toast it.
- Frozen waffles, pancakes, French toasts and frozen bagels should be cooked using the Defrost button.
Pastries
- Be careful when toasting pastries; the filling can become quite hot, long before the surface of the pastry is toasted. Do not leave pastries unattended while toasting.
Starting and stopping the toasting
- For starting the toasting, push down the lever until it reaches its lock-down position.
- When the toasting cycle is over, the toast will come out automatically.
- For stopping the toasting before it finishes, just press the Stop button.
- Note: Do not force the bread into the slots.
- Do not introduce glazed or stuffed pastries or buttered breads as this may cause a fire.
- Uneven toasting usually happens because of toasting bread of uneven thickness.
- After using it, unplug the device from the electrical outlet.
Defrosting button
- The defrosting function is intended to defrost the bread and then toast it slightly.
- Introduce a slice of bread
- Make sure the slices of bread do not overlap and that the lever is lifted.
- Set the toasting selector
- Settings 1-2: For frozen breads and thinner frozen pieces such as frozen pancakes.
- Settings 3-4: For pastries, frozen waffles, thin baguettes and frozen bagels.
- Settings 5-6: For thicker frozen items such as bagels, hand-cut bread and thick baguettes
- Begin toasting: Push down the lever until it reaches its lock-down position (it must remain fix).
- Press the Defrost button. A LED light will indicate that this feature has been activated.
- When the defrosting is completed, the lever will go to its upper position taking with it the bread. If you wish to stop the cycle before it finishes, just press the Stop button. After using the device, unplug it.
Reheating button
The reheating function is intended to reheat the bread without toasting it.
- Introduce a slice of bread. Make sure they do not overlap and the lever is lifted (it must remain fix).
- To begin reheating, push down the lever until it reaches its lock-down position.
- Press the Reheating button. A LED light will indicate that this feature has been activated.
- When the reheating is completed, the lever will go to its upper position taking with it the bread. If you wish to stop the cycle before it finishes, just press the Stop button. After using the device, unplug it.
Bagel button
This functions is designed to last the same as the toasting cycle. When you use it to toast thicker breads, baguettes, muffins or other thick breads, a higher toasting setting may be required.
- Insert slice(s) of halved bagels/baguettes. Make sure they do not overlap.
- Push down the lever until it reaches its lock-down position (it must remain fix).
- Press the Bagel button. A LED light will indicate that this feature has been activated.
- When this function is completed, the lever will go to its upper position taking with it the bread. If you wish to stop the cycle before it finishes, just press the Stop button. After using the device, unplug it.
Pastry holder
To reheat the pastry, place the holder on the device, using the side clampings. Make sure the clamping ends are slightly inside the slots. Place the food on the holder. To start the reheating, push the lever all the way down (it should remain fix). Press the reheat button. A LED light will indicate that this function has been activated When the reheating is completed, the lever will go to its upper position. If you wish to stop the cycle before it finishes, just press the Stop button. After using the device, unplug it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>