Kidzone 060-ROT-06V2 Ride On Bumper Car 360 Rotation Instruction Manual

: June 9, 2024
: Kidzone

Table of Contents

Kidzone 060-ROT-06V2 Ride On Bumper Car 360 Rotation
Product Information
Safety Instruction
Product Specification
Parts and Feature
Product Usage Instructions
- Using the remote control
Charging the Battery
Operating the Vehicle
Care and Maintenance
Troubleshooting
FCC STATEMENT
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kidzone 060-ROT-06V2 Ride On Bumper Car 360 Rotation

Kidzone-060-ROT-06V2-Ride-On-Bumper-Car-360-Rotation-
product

Note: Product appearance and colors may vary from the photo.

Attention

This vehicle is packed with the battery disconnected. Connect the battery before use. This manual contains important safety, performance, and maintenance information. Read the manual before allowing your child to ride your new electric ride-on toy. Keep this manual properly for future reference. $Kidzone-060-ROT-06V2-Ride-On-Bumper-Car-360-Rotation-fig- $1$$

Product Information

Product Name: Ride On Bumper Car 360 Rotation (12V)
Item Number: 060-ROT-06V2
Appearance: Product appearance and colors may vary from the photo.
Warning: The battery is packed and disconnected. The battery must be connected before use.

Safety Instruction

When using electrical products, basic safety precautions should always be followed including the following

Read all Instructions before operating this product

WARNING:

To Protect against electrical shock, do not immerse the cord, charger, transformer, battery, or product in water or other liquid.
Only use charging devices, transformers, and batteries provided or recommended by the manufacturer.
For your children’s safety, the product should be assembled by an adult.
This toy is not intended for children under 18 months.
Closely adult supervision is necessary when your child is operating this product.
Disconnect the battery if not used for a long time.
Do not use this product as a traffic tool.
To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than 1 rider.
Do not use this product on slippery surfaces.
Always keep hands, hair, and clothing away from moving parts.
The maximum user weight for this product is 66 lb/ 30 kg.
Do not change, modify or add any electrical wiring to this product.
Charge the battery at least once a month even if not operating the vehicle to maximize the battery life. Avoid using this product in a tight environment to prevent damage to the product or injury to the user. Do not use this product in the dark. Only operate this product during the daytime or in a well-lit area.
For your child’s safety, please make sure the seat belt is securely fastened when operating this product. Personal protective equipment such as helmets is needed when operating this product. $Kidzone-060-ROT-06V2-Ride-On-Bumper-Car-360-Rotation-fig- $2$$
Avoid continuously hitting obstacles to prevent overheat or damage to the motor; Drive away or remove obstacle as soon as possible.

WARNING:

PREVENT FIRE

Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system.
Use of the wrong type of battery or charger could cause a fire or explosion resulting in serious injury.
The battery must be handled by adults only. The battery is heavy and contains sulfuric acid(electrolyte).
Dropping the battery could result in serious injury.
Never allow children to charge the battery. Battery charging must be done by adults only.
Never lift or carry the battery by the wires or connector. This can damage the battery and possibly cause a fire resulting in serious injury. Lift and carry the battery by the case only.
Examine the battery, charger, and connectors for excessive wear or damage each time you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the worn or damaged part.

WARNING:

Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage, or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.
Stop operating this product whenever it stuck under any circumstances.
Friction Hazards! Do not operate this product on carpets or rugs, it may cause burn or fire if overrun or over spin. This product has an automatic cut-off function if overcurrent, overloaded, or operated incorrectly, wait for 10 – 15 seconds to reactivate this product automatically.

Product Specification

Motor: 2 x 12V, 380 / 20000rpm
Battery: 12V 4.5 AH
Charger: 12V 500 MA
Speed: 0.7 – 1.3 mph (1.1 – 2.1 km/h)
Suitable Age: 18 – 72 months
Maximum Users’ Weight: 66 lb / 30 kg
Dimension: 28.35”x28.35″x16.93″ (72x72x43cm)
Battery Charging Time: 8 – 12 hours
First Charging Time: 4- 5 hours
Max Charging Time: 12 hours
Battery (Temperature Tolerance): 104°F

Parts and Feature

Vehicle Body
Seat Cover
Seat Belt
Control Stick
Power Switch
Light Switch
Speed Switch
Charging Port
Remote Control
Lighting $Kidzone-060-ROT-06V2-Ride-On-Bumper-Car-360-Rotation-fig- $3$$

Product Usage Instructions

Before using the Ride On Bumper Car, read the instruction manual completely for important safety, performance, and maintenance information. Keep the manual for future reference.

Before activating this vehicle

Unscrew to detach the seat cover.
Connect the battery terminals. (Red terminal connects to the Red connector, and the Black terminal connects to the Black connector).
Attach the seat cover and tighten the screws.
- Low speed
- High speed
Operating this vehicle.
To turn on the vehicle, press the power switch “I”.
To turn off the vehicle, press the power switch “O”.
To select low speed, press the “–” speed switch.
To select high speed, press the “=” speed switch.
To light the vehicle, press the light symbol switch.
To move the vehicle forward, push both controls sticks forward at the same time.
To move the vehicle backward, pull both controls sticks backward at the same time.
To left turn, the vehicle forward, push the right control stick forward.
To right turn the vehicle forward, push the left control stick forward.
To left turn the vehicle backward, and pull the right control stick backward.
To right turn the vehicle backward, and pull the left control stick backward.
To left spin the vehicle, pull the left control stick backward and push the right control stick forward at the same time.
To right-spin, the vehicle, push the left control stick forward and pull the right control stick backward at the same time.
To stop the vehicle, release both control sticks and return them to the center position.

“S” button for speed selection

Low speed: default and 1 solid red light
Middle speed: press once, 2 solid red lights
High speed: press again, 3 solid red lights
Back to low speed: press again

Using the remote control

The remote control should only be used by adults.
The remote control overrides the manual control of the vehicle.

Frequency Matching
To activate this vehicle, match the remote control frequency to the vehicle the first time or after changing the batteries is required.

Insert batteries into the remote control.
Press the “M” button for 2 – 4 seconds, and the red indicator flash.
Turn on the power of the vehicle, the indicator changes to solid red.

If failed to match, remove and replace the batteries from the remote control and repeat the above steps.

NOTE: The remote control goes into sleep mode after 10 seconds of idle time.

Change Battery

Remove the cover on the back of the controller and insert two AAA (LR03) batteries in the correct polarity.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.

Control the vehicle

For your child’s safety, please make sure the seat belt is securely fastened when operating this vehicle.
To move the vehicle forward, press the up arrow switch.
To move the vehicle backward, press the down arrow switch.
To left turn, the vehicle forward, and press the up arrow switch followed by the left arrow switch. To right turn the vehicle forward, press the up arrow switch followed by the right arrow switch.
To left turn, the vehicle backward, press the down arrow switch followed by the left arrow switch.
To right turn, the vehicle backward, press the down arrow switch followed by the right arrow switch.
To the left spin, of the vehicle, press the left arrow switch.
To right-spin, the vehicle, press the right arrow switch.
To stop the vehicle, release all switches.
To enable the emergency brake, press the “P” switch, all 3 red lights flash and all switches stop working. Press the “P ” switch again to activate the vehicle.

Bluetooth connection
To connect your mobile device to the vehicle, turn on the Bluetooth and select “Kidzone Bumper Car”. Voice message “Connected Note” followed by “Your device is connected successfully” after pairing. Music can be played from the vehicle speaker according to the user’s preferences. To disconnect your mobile device from the vehicle speakers, turn off the Bluetooth.

WARNING

Closely adult supervision is needed when children are operating the vehicle.

Charging the Battery

Warning: The battery should only be charged by an adult, and the battery is not replaceable.
Plug the charger into the charging port. The charger indicator turns red when charging and green when charging is completed.
Fully charge the battery for 8-12 hours.
Do not charge the battery for more than 20 hours.
Make sure the battery and charger are not damaged before charging. Do not charge if any sign of wear or damage is found.
Note: Charge the battery at least once a month, even if the vehicle is not operating, to maximize the battery life.

Operating the Vehicle

To turn on the vehicle, press the power switch I. To turn off the vehicle, press the power switch O.
To select low speed, press the “–” speed switch. To select high speed, press the “=” speed switch.
To light on the vehicle, press the light symbol switch.
To move the vehicle forward, push both control sticks forward at the same time. To move the vehicle backward, pull both controls sticks backward at the same time.
To turn the vehicle left, push the right control stick forward.
To turn the vehicle right, push the left control stick forward.
To spin the vehicle left, pull the left control stick backward and push the right control stick forward at the same time. To spin the vehicle right, push the left control stick forward and pull the right control stick backward at the same time.
To stop the vehicle, release both control sticks and return them to the center position.
Warning: Stop operating the product whenever it gets stuck under any circumstances. Do not operate this product on carpets or rugs as they may cause burns or friction hazards.

Care and Maintenance

Check the product regularly and make sure there are no missing or loose parts. Re-tighten any loose parts if necessary.
Make sure there are no cracked or broken plastic parts.
Keep away the product from heat and humid areas, and cover it with a trap when not in use.
Disconnect the battery if the product is not used for a long period of time.
Clean the vehicle with a cloth. Use non-wax furniture polish to restore shine to plastic parts. Do not use abrasive cleaner.
Do not wash the product with a hose or immerse any parts in water or other liquid.
Occasionally use lightweight oil to lubricate moving parts

Troubleshooting

Problem Possible Reason	Solution
	Low Battery
The vehicle does not move	Fuse Protection

Vehicle is overloaded

| Make sure users’ weight is under

66 lb/ 30 kg

The vehicle is being used in harsh environment| Avoid using the vehicle in harsh environments
Problem| Possible Reason| Solution
---|---|---
Vehicle needs a push to go forward| Poor wire connection| Check if the battery connectors are firmly connected.

Contact Customer service if necessary

“Dead spot” on motor| Contact customer service
Loud grinding sound or clicking sound from the motor or gearbox| Damaged motor or gearbox| Contact customer service
The battery does not charge| Disconnected / Badly connected battery| Reconnect the battery
Disconnected / Badly connected charger| Make sure the charger is firmly plugged into the power source and connected to the charging port
Charger not working| Contact customer service
The charger becomes warm during charging| Normal| N/A

FCC STATEMENT

Model: TX4
FCC ID: 2AJ2H-WYTX4

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

NOTE:
This product has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technical for help.

Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This product conforms to toy safety standards CPSIA and ASTM-F963.

Importer: ONE BIG OUTLET
Importer Address: 19301 E Walnut dr. N. The City of Industry CA91748 United States
Importer Tel.: 800 – 946 – 6151

Warranty

Limited Term Warranty (One Year from Date of Purchase)

WARRANTY TERMS
KIDZONE warrants that its merchandise is free from manufacturing defects (workmanship and/or material) and will either give credit or replace defective parts for a period of up to one (1) year from the date of purchase in accordance with the conditions set forth below. If a manufacturing defect is found, KIDZONE should be notified promptly of the defect and supplied a copy of the invoice and delivery ticket. Inspection by a KIDZONE employee or representative may be necessary to verify that a manufacturing defect exists, or you may be required to submit samples to KIDZONE along with a digital image of the defects. If replacement is required in accordance with this warranty and the defective material or merchandise has been discontinued or unavailable, KIDZONE reserves the right to select and supply similar merchandise or offer full credit for the merchandise; otherwise, the same material or merchandise will be supplied for replacement purposes. This warranty is made solely to the retailer and is not transferable under any circumstances. It is the retailer’s responsibility to contact KIDZONE with a claim. We will not handle claims from consumers directly; all requests must go through the retailer who sold the merchandise to the consumer. We advise all retailers to retain invoices for a minimum of one (1) year for warranty purposes. This warranty supersedes and replaces all implied warranties of merchantability and uses for a particular purpose. No representative, employee, agent, or any other person is authorized to assume for KIDZONE any additional liability or responsibility in connection with KIDZONEs merchandise except as described above. Implied warranties or merchantability and fitness of the merchandise are limited to a period of one (1) year from the date of purchase. In no event shall KIDZONE be liable for indirect, consequential, or incidental damages of any kind.

ADDITIONAL CONDITIONS
THE FOLLOWING EXAMPLES ARE NOT MANUFACTURER’S DEFECTS:

Colors may vary slightly from the photo because of photography and printing tolerances.
Sizes stated in U.S. standard measurements may vary slightly due to products being manufactured using the metric system.
No returns for buyer’s remorse.
No returns – other than those stated above will be accepted.

ADDITIONAL CONDITIONS
THE WARRANTY IS VOID FOR ANY OF THE FOLLOWING CONDITIONS:

Improper maintenance or improper use results in damage.
Any product modifications by dealers, consumers, or other parties not authorized by KIDZONE will void this warranty.
Floor samples sold or products designated “AS IS” at the time of purchase are not covered by the warranty
The warranty does not cover minor variations or differences between floor samples or printed illustrations and your product.
The cost of packaging and shipping to and from KIDZONE is not covered by the warranty unless expressly arranged by KIDZONE.
This warranty covers only articles of appliances intended for residential use only and does not cover any industrial, commercial, institutional, or Rental use.
Dissatisfaction due to buyer’s remorse.
Normal wear and tear.
Damages incurred during transportation.
Damages incurred during assembling or maintenance.
Damage incurred by accidents or abuse.