STAHL CMP-32PXSS2K Cable Gland with Compound Installation Guide
- June 9, 2024
- STAHL
Table of Contents
STAHL CMP-32PXSS2K Cable Gland with Compound
Product Information
- Product Name : CMP-32PXSS2K
- Art. No.: 109443
- Explosion Protection:
- Ex d and Ex e barrier cable entries
- Suitable for unarmoured cables and cables with wire-braid armouring
- Explosion protection certificates: IECEx gas certificate, IECEx dust certificate, IECEx firedamp certificate, ATEX gas certificate, ATEX dust certificate, ATEX firedamp certificate
- Ambient Conditions:
- Ambient temperature : -20°C to +60°C
- Degree of protection (IP): IP66/68
- Sealing material: Silicone-free compound
- Clamping range: 16mm to 32mm
- Max. number of cores : Dependent on cable diameter and type
- Gland size : M32 x 1.5
- Protrusion length : Dependent on cable diameter and type
Product Usage Instructions
- Select the appropriate size and type of cable to be used with the cable gland.
- Ensure that the cable is clean and free from any damage or defects.
- Remove any excess outer sheath from the cable to expose the conductor wires.
- Insert the cable through the cable gland and tighten the locknut until the gland is securely fastened onto the cable.
- Apply a suitable sealant compound around the cable sheath to create a watertight seal.
- Connect the conductor wires to the appropriate terminals or connectors.
- Ensure that all connections are secure and properly insulated.
- Verify that the cable gland is installed in the appropriate hazardous area according to the explosion protection certificate and local regulations.
Note : For further technical details, refer to the manufacturer’s website or consult with a certified technician.
Installation Equipment and Accessories
Cable gland with compound
- Cable entry for unarmoured cables and cables with wire- braid armouring
- Designed to prevent cold flow
- Worldwide certification in accordance with IECEx, ATEX, UL and cCSAus
WebCode PXSS2KA
PXSS2K series metal Ex d and Ex e barrier cable entries are suitable for
unarmoured cables and cables with wire- braid armouring. They are equipped
with a compound barrier. They feature a displacement seal for the outer cable
sheath coupled with a double flood seal with integral protection.
Technical Data
Explosion Protection
Ex version| Ex e & Ex d & Ex nR & Ex ta
Application range (zones)| 1
2
20
21
22
IECEx gas certificate| IECEx CML 18.0182X
IECEx gas explosion protection| Ex db IIC Gb
IECEx dust certificate| IECEx CML 18.0182X
IECEx dust explosion protection| Ex ta IIIC Da
IECEX firedamp certificate| IECEx SIM 14.0008 X
IECEx firedamp protection| Ex db I Mb
IECEx firedamp protection 2| Ex eb I Mb
IECEx restricted breathing certificate| IECEx CML 18.0182X
IECEx restricted breathing| Ex nR IIC Gc
ATEX gas certificate| CML 18ATEX1325X
ATEX gas explosion protection| E II 2 G Ex db IIC Gb
ATEX dust certificate| CML 18ATEX1325X
ATEX dust explosion protection| E II 1 D Ex ta IIIC Da
ATEX firedamp certificate| CML 18ATEX1325X
ATEX firedamp protection| E I M2 Ex db I Mb
ATEX firedamp protection 2| E I M2 Ex eb I Mb
ATEX restricted breathing certificate| CML 18ATEX4317X
ATEX restricted breathing| E II 3 G Ex nR IIC Gc
Notes| The product certification and certificates can be downloaded from the
manufacturer’s homepage
(www.cmp-products.com)
Ambient Conditions
Ambient temperature| -60 °C … +85 °C
Mechanical Data
| Version | 32 |
|---|---|
| Strain relief | No |
| Degree of protection (IP) | IP66 |
| Degree of protection note | IP67 and IP68 mounting in accordance with the |
specifications of the manufacturer, CMP
Sealing material| SOLO LSF
Sealing ring material| Viton
Material| Nickel-plated brass
Silicone-free| Yes
Clamping range| 17 – 26.3 mm
Armouring type| Unarmoured cable types
Clamping range| 17…. 26.3 mm
Max. number of cores| 38
Construction type| BS 6121, IEC/EN 62444
Width across corners| 45.1 mm
Width across flats| 41 mm
Thread size| M32
Thread length| 15 mm
Thread pitch| 1,5
Thread standard| Metric
Gland size| 32
Inner sheath| 23.6 mm
Max. internal conduit diameter| 23.6 mm
Outer sheath| 17 … 26.3 mm
Protrusion length| 61.1 mm
Impact strength| 20 J
PVC boot| PVC10
Lot size| 1
Weight| 0.39 kg
Weight| 0.86 lb
Dimensional Drawings (All Dimensions in mm [inches]) – Subject to
Alterations
- A = Max. inner sheath
- G = Max. internal conduit diameter
- B = Outer sheath
- C = Thread size
- D = Width across corners
- D = Width across flats
- E = Thread length
- F = Protrusion length
We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding.
R. STAHL Schaltgeräte GmbH | Am Bahnhof 30 | 74638 WALDENBURG
Tel. +49 7942 943 1700 | +49 7942 943 1777 | Email: sales.de@r-stahl.com | r-stahl.com
References
- R. STAHL | Explosion Hazard Systems | Industrial Explosion Protection
- You will find a little bit of Stahl chemistry everywhere | Stahl | Stahl
- Specialists in Cable Glands & Cable Cleats | CMP Products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>