Squamae BCA-381BC Eight Electrodes Body Composition Analyzer User Manual
- June 9, 2024
- Squamae
Table of Contents
BCA-381BC Eight Electrodes Body Composition Analyzer
User Manual
The Company is certified under 15013485 Quality Management System
Note: This product shall not be used as a medical device product and
shall not be used as a basis for medical diagnosis
Appearance
Battery Installation and Replacement
- When first use it, install a 3 x AAA battery on the back of the device and pay attention to the positive and negative electrode of the battery.
- During use, if the “Lo” symbol is displayed on the screen, it indicates that the battery is low, please replace the battery.
- If you do not use the device for a long time, please remove the battery.
Download and install the phone app
Scan the QR code on the right to download and install the client directly, Or search for “AiLink” in the application market to download and install.
https://aicare.net.cn/app/ailink/download/
Register and Pair Device
Open the “AiLink” APP, follow the steps to register an account and submit the user’s personal information; after the registration is complete, pair the device according to the app’s instructions, and wait for the app to prompt that the paring is complete (the phone must be turned on Bluetooth before paring, and Lightly step on the device to turn on, and keep the device’s screen light)
Get Started
Weight only
Stand on the device and keep your body stable. The device will display the
body weight.
After the weight is locked, the device will automatically shut down.
Measuring body composition
- Select the appropriate unit setting before use, you can use the unit button on the device; you can also select the unit in the app settings.
- Before starting the measurement, make sure that Bluetooth is turned on and the device is successfully connected to the app.
- Place the device on a flat solid surface, stand with bare feet on the electrode pads of the device, hold the handle firmly with both hands, and maintain an upright posture for measurement. When the weight data is stable and flashing, the data will be transmitted to the app through Bluetooth. At this time, the user can view the measured body composition on the app. The accuracy of the measurement result depends on the posture of the user standing on the device. Please maximize the contact with the electrode pads on the device to ensure the best result.
Note
- To ensure the accuracy of the data, it is recommended that each measurement be performed at the same time of day;
- Children under 6 and adults over 100 are temporarily unable to use measurement functions other than weight;
Examples of correct and wrong measurement operation
Error message description
Security Information
Before using the equipment, please read the following precautions to ensure
the best performance of the equipment and avoid dangerous or illegal
situations.
Electronic Device
Do not use this device in places where the use of wireless devices is
expressly prohibited, otherwise it will interfere with other electronic
devices or cause other dangers.
Impact on medical equipment
In medical and health care facilities where the use of wireless equipment is
expressly prohibited, please follow the regulations and turn off the
equipment.
The radio waves generated by the equipment may affect the normal operation of
implanted medical equipment or personal medical equipment, such as pacemakers,
cochlear implants, and hearing aids. If you use these medical devices, please
consult their manufacturers about the restrictions on using this device.
When using this device, please keep a distance of at least 15 cm from
implanted medical devices (such as pacemakers, cochlear implants, etc.)
Flammable and explosive area
Do not use this equipment in gas stations (Service stations) or near any
flammable and explosive areas such as flammable materials and chemical agents,
and follow all instructions. In or around fuel or chemical storage and
transportation areas or explosive places, the equipment may cause an explosion
or fire.
Do not store or transport the device and its accessories in the same box as
flammable liquids, gases or explosive materials.
Battery safety
If you do not use it for more than 3 months, please remove the battery,
otherwise liquid leakage may occur and cause damage to the equipment or human
body.
If the battery is discolored, deformed, or abnormally heats up during use,
charging or storage, please stop using it and replace it with a new battery.
Do not throw the battery into the flame, otherwise it will cause the battery
to catch fire and may explode.
Please dispose of the battery according to local regulations, and do not
dispose of the battery as household garbage. Improper disposal of the battery
may cause the battery to explode.
Do not allow children or pets to swallow the battery to avoid injury or
explosion of the battery.
Do not drop, crush or puncture the battery. Avoid exposing the battery to high
external pressure, which may cause internal short circuit and overheating of
the battery.
Do not use damaged batteries.
Operating environment
Do not use the device in dusty, damp, dirty, or close to magnetic fields, to
avoid internal circuit failure of the device.
Please use this equipment within the temperature range of 5°C~40°C. When the
ambient temperature is too high or too low, it may cause equipment failure.
Do not place the device near heat sources or exposed fire sources, such as
electric heaters, microwave ovens, ovens, water heaters, stoves, candles or
other places that may generate high temperatures.
Do not allow children or pets to play with the device or its accessories to
avoid injury to it or cause the device to malfunction or explode.
Do not use it on wet or slippery surface.
Do not measure when your body or feet are wet, otherwise it may cause body
injury, inaccurate measurement data, water penetration and other malfunctions.
Maintenance
- Please keep the device and its accessories dry. Do not use external heating devices such as microwave ovens or hair dryers to dry them.
- Do not place the device and its accessories in areas where the temperature is too high or too low, otherwise it may cause the device to malfunction, catch fire or explode.
- Do not subject the device and its accessories to strong shocks or vibrations to avoid damage of the device and its accessories and cause equipment failure.
- Before cleaning and maintenance, please stop using this device, close all applications on phone, and disconnect all connections or cables from other devices.
- Do not use chemicals, cleaning agents, or detergents to clean the equipment or its accessories. Please use a clean, dry soft cloth to wipe the device or its accessories.
- Do not disassemble or modify the equipment and accessories without authorization, otherwise the equipment and accessories will not be covered by the company’s warranty. If the equipment fails, please call the service hotline.
- If the device collides with a hard object or the device is subject to a strong impact from the outside cause broken screen, do not touch or try to remove the broken part,
please stop using it immediately and contact customer service.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>