HomeControl STI-6400 Series Exit Stopper Installation Guide

June 9, 2024
HomeControl

Exit Stopper ® Quick Install
STI-6400 Series Rely on STI ®

STI-6400 Series Exit Stopper

SET UP

  1. Key in OFF position
  2. Remove security screw with provided wrench
  3. Remove cover from base, push on lock to separate
  4. Choose setting – refer to switch table, default settings shown side 2HomeControl STI 6400 Series Exit Stopper - security2
  5. Unwrap battery and connect
  6. Terminal block (remote power and relay options) – refer to full install online for wiring connections
  7. Test – place magnet next to reed, turn key switch on, separate magnet from reedHomeControl STI 6400 Series Exit Stopper - security5
  8. Apply language label if desiredHomeControl STI 6400 Series Exit Stopper - security6

MOUNTING

  1. Place reed at desired location (top, right, bottom or left)
  2. Position base. Mark and drill four (4) holes 1” (25mm) deep. Using plastic anchor, drill 3/16” (4.5mm). Install into wood or steel: drill 9/64” (3.5mm). Mount using (4) M4 x 25mm screws. MOUNTING HOLES MOUNTING HOLESHomeControl STI 6400 Series Exit Stopper -Mounting holes
  3. Install reed magnet, mark with pencil, drill, install using plastic anchor, drill 3/16” (4.5mm). Install into wood or steel: drill 1/8” (3mm). Mount with (2) M3.5 x 32mm screws.
  4. Test, turn key on, open door
  5. Replace cover, snap lid from top, secure with security screwHomeControl STI 6400 Series Exit Stopper -Mounting holes 3
SWITCH SETTINGS Arming – immediate 1OFF* 2 3 4 5 6 7 8
Arming – 15 second delay ON
inp – immediate OFF’
Tnp – 15 second delay ON
Shut-ott based on duration (switches 4 & 5) OFF*
Shut-off approx. 3 sec. after door closes ON
Duration – 30 second alarm OFF* OFF’
Duration -180 second alarm OFF ON
Duration – continuous alarm ON OFF
Duration – 30 second annunciator mode ON ON
Low battery detection on – Turn switch off OFF’
Low battery detection off – Turn switch on ON
Volume – high ON’
Volume – low OFF
Turn switch on OFF’

Dry contact relay function OFF
Dry contact relay function ON| | | | | | | | ON

*default
NOTE: Disconnect all power sources before changing switch settings.
Warranty
Three year warranty or a one year limited warranty (from date of purchase) on most products. See website for details.
Electronic warranty form at www.sti-usa.com/wc14.
WARNING: This product can expose you to chemicals including Dichloromethane, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.

https://www.sti-usa.com/series/sti-exit-stopper/

Subject to change without notice.

HomeControl STI 6400 Series Exit Stopper - Featured
Image2306 Airport Rd • Waterford, MI 48327, USA
Phone: 248-673-9898info@sti- usa.comwww.sti-usa.com
Taylor House • 34 Sherwood Road • Bromsgrove, Worcestershire • B60 3DR • England
Tel: +44 (0)1527 520 999 • info@sti-emea.comwww.sti-emea.com
Unit 7A • Lockhead Avenue • Airport Business Park • Waterford • X91 HWF2 • Ireland
info@sti-emea.comwww.sti- emea.com

https://www.sti-emea.com/series/exit-stopper/
6400 QUICK INSTALL

March2021

Documents / Resources

| HomeControl STI-6400 Series Exit Stopper [pdf] Installation Guide
STI-6400 Series Exit Stopper, STI-6400 Series, Exit Stopper, Stopper
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals