AtR 3 Pack Adjustable Height Lamp Set Instruction Manual

AtR 3 Pack Adjustable Height Lamp Set

Product Information: 3 Pk Adjustable Height Lamp Set

The 3 Pk Adjustable Height Lamp Set includes two table lamps and one floor lamp. The lamps feature adjustable height settings, allowing you to customize the height of the lamp to your liking. The lamps have a polarized plug, which is a safety feature to reduce the risk of electrical shock and fire. The lamps are for indoor use only and should not be used near water.

The lamps require 1 x 100W 3-Way Type A Medium Base bulb (not included). It is important to only use bulbs of the specified type and maximum rated wattage or less.

Product Usage Instructions

Important Safety Instructions:

• The lamp has a polarized plug. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
• Never use with an extension cord unless the plug can be fully inserted.
• Do not alter the safety feature.
• The lamp is for indoor use only.
• The lamp should not be used near water.
• Never immerse the lamp in water or other liquids.
• Never cover the lamp with any object including cloth or paper as this is a fire hazard.
• Do not handle the bulb immediately after the light is turned off as it will be hot.
• This is not a toy.

Assembly Instructions:

Table Lamp:

1. Screw pole (A) into Base (B).
2. Place shade (C) onto Socket (D).
3. Adjust the height of the table lamp by removing screw (E) replace and tighten once desired height is achieved. (You will need to pull the cord through the base to lower the height and/or bring the cord up by pulling the adjustment pole up when fully extending the lamp.)
4. Install bulb. Only use bulbs of specified type and maximum rated wattage or less.
5. Plug the electrical supply cord into the wall outlet.
6. Turn ON/OFF using the switch on the socket.

Floor Lamp:

1. Screw pole (A) to base (B), then screw pole (C) to pole (A).
2. Screw pole (D) to pole (C), then screw lamp holder (E) to pole (D).
3. Place shade (F) onto socket (G).
4. Adjust the height of the floor lamp by removing screw (H) replace and tighten once desired height is achieved. (You will need to pull the cord through the base to lower the height and/or bring the cord up by pulling the adjustment pole up when fully extending the lamp.)
5. Install bulb. Only use bulbs of specified type and maximum rated wattage or less.
6. Plug the electrical supply cord into the wall outlet.
7. Turn ON/OFF using the switch on the socket.

Cleaning & Maintenance:

1. Unplug the fixture before cleaning.
2. Use a clean, dry, soft, lint-free cloth.
3. Do not use water or other chemical cleaning agents.

Questions?
E-mail our customer service department at customerservice@alltherages.com

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter this safety feature.
This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids.
Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.

ASSEMBLY INSTRUCTIONS

Each Requires 1 x 100W 3-Way Type A Medium Base bulb (not included)

TABLE LAMP:

1. Screw pole (A) into Base (B).

2. Place shade (C) onto Socket (D).

3. Adjust the height of the table lamp by removing screw (E) replace and tighten once desired height is achieved.
   (You will need to pull the cord through the base to lower the height and/or bring the cord up by pulling the adjustment pole up when fully extending the lamp.)

4. Install bulb. Only use bulbs of specified type and maximum rated wattage or less.

5. Plug the electrical supply cord into the wall outlet.

6. Turn ON/OFF using the switch on the socket.

FLOOR LAMP:

1. Screw pole (A) to base (B), then screw pole (C) to pole (A).

2. Screw pole (D) to pole (C), then screw lamp holder (E) to pole (D).

3. Place shade (F) onto socket (G).

4. Adjust the height of the floor lamp by removing screw (H) replace and tighten once desired height is achieved.
   (You will need to pull the cord through the base to lower the height and/or bring the cord up by pulling the adjustment pole up when fully extending the lamp.)

5. Install bulb. Only use bulbs of specified type and maximum rated wattage or less.

6. Plug the electrical supply cord into the wall outlet.

7. Turn ON/OFF using the switch on the socket.

LIMITED WARRANTY

All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039 (All the Rages) warrants its products (the “products”) as follows:

1. Limited Warranty.
   Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. If the products do not conform to this Limited Warranty during the warranty period (as herein above specified), Buyer shall notify Manufacturer in writing of the claimed defects and demonstrate to Manufacturer’s satisfaction that said defects are covered by this Limited Warranty. If the defects and proof of purchase are properly reported to Manufacturer within the warranty period, and the defects are of such type and nature as to be covered by this warranty,Manufacturer shall, as its own expense, furnish replacement products or, at Manufacturer’s option, replacement parts for the defective products. Installation of the replacement products or replacement parts shall be at Buyer’s expense.

2. Exclusive Obligation:
   THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of Manufacturer shall be to repair or replace the defective products in the manner and for the period provided above. Manufacturer shall not have any other obligation with respect to the products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall Manufacturer be liable for incidental, special, or consequential damages.

3. Other Statements.
   Manufacturer’s employees or representatives’ oral or other written statements do not constitute warranties, shall not be relied upon by Buyer, and are not part of the contract for sale or this limited warranty.

4. Entire Obligation.
   This Limited Warranty states the entire obligation of Manufacturer with respects to the products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect.

ALL THE RAGES INC
SUITE 101
LIVINGSTON, NJ 07039
WWW.ALLTHERAGES.COM
PRINTED IN CHINA
355 EISENHOWER PARKWAY

References

• Home | All The Rages

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>