Queclink GL530MG LTE Cat M1-NB2 Waterproof GNSS Tracker Owner’s Manual
- June 9, 2024
- Queclink
Table of Contents
Queclink GL530MG LTE Cat M1-NB2 Waterproof GNSS Tracker
SPECIFICATIONS
LTE Cat M1/NB2 waterproof GNSS tracker with up to 7 years standby time
Standby Time:
INTRODUCTION
The GL530MG is the upgraded LTE Cat M1/NB2 version of GL500MG. It integrates the latest low-power wide area network standards and covers a broader area, making it more flexible to deploy. It is an easy-to-deploy asset tracker built on Queclink’s innovative power management technology. It lasts for up to seven years and features one of the longest battery lives among devices of its size in the market. The built-in light sensors make the product sensitive to tamper attempts and its waterproof design allows it to be used in harsh environments. With internal temperature and light sensors, the product is ideal for a wide range of environmental monitoring applications such as cold chain logistics, warehouse management, cargo trucking, high-value static asset monitoring and more. The GL530MG supports several mounting alternatives which use unique clip on design to securely attach the device to any asset.
- LTE Cat M1/NB2 with 2G Fallback
- Rapid & Covert Installation 7 Years Standby Time
- OTA Control
- Scheduled Timing Report Geo-fences
- Waterproof
- Vibration Feedback
- Low Power Alarm
- Wakeup Report
- Motion Detection
- Automatic Mode Switching Temperature Monitoring Tamper Detection
- Magnetic Mounting (Optional) Use with Animal Collars
Appearance
Interfaces
| Power Button | Used for power on/off and working status checking |
|---|---|
| LTE Antenna | Internal only |
| GNSS Antenna | Internal only |
| LED Indicators | GNSS, Status |
Air Interface Protocol
| Command Set | @Track protocol command |
|---|---|
| Transmit Protocol | TCP, UDP, SMS |
| Working Modes | Power saving mode for long standby time Continuous mode for |
emergency tracking
Scheduled Timing Report| Report position and status at preset time intervals
Geo-fences| Support up to 20 internal geo-fence regions
Low Power Alarm| Alarm when internal battery is low
Wakeup Report| Report when the device wakes up
Motion Detection| Motion detection based on internal 3-axis accelerometer
Reporting Frequency Adjustment| Intelligent adjustment of reporting frequency
Accessories
- GL500M Magnetic Mounting Bracket: Used to install GL500 series products on metal surface for convenient taking off
- GL500M Mounting Bracket: Used to hold GL500 series products on plastic bracket which is installed on surfaces where screw holes can be drilled
- USB Cable 0.5M: It is used for firmware upgrade of GL53MG, GV57MG and GL530MG
- UART Cable 0.5M: It is used for configuration of GL53MG, GV57MG and GL530MG
CONTACT
- +86 21 5108 2965
- www.queclink.com
- sales@queclink.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>