Queclink MTR2023 Driving Smarter IoT User Manual
- June 1, 2024
- Queclink
Table of Contents
MTR2023 User Manual
| Document Title | MTR2023 User Manual |
|---|---|
| Version | N/A |
| Author | Bruce.Chen |
| Date | 2023-04-26 |
| Status | Release |
| Document Control ID |
International Telematics Solutions Innovator
www.queclink.com
User Manual
General Notes Queclink offers this information as a service to its customers,
to support application and engineering efforts that use the products designed
by Queclink. The information provided is based upon requirements specifically
provided to Queclink by the customers. Queclink has not undertaken any
independent search for additional relevant information, including any
information that may be in the customer’s possession. Furthermore, system
validation of this product designed by Queclink within a larger electronic
system remains the responsibility of the customer or the customer’s system
integrator. All specifications supplied herein are subject to change.
Copyright
This document contains proprietary technical information which is the property
of Queclink Wireless Solutions Co., Ltd. The copying of this document,
distribution to others, and communication of the contents thereof, are
forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of a patent grant or the
registration of a utility model or design. All specifications supplied herein
are subject to change without notice at any time.
Copyright © Queclink Wireless Solutions Co., Ltd. 2018
1 Introduction
This document describes how the MTR2023 works.
2 Device ( picture )
2.1 Hardware
2.1.1 parts list:
| Name | Picture |
|---|---|
| Power connection |
Table 1.Parts List
2.1.2 Interface Definition
The power cable input 8-32V, red wire for positive, black wire for negative
| PIN NO. | PIN name | Function Description |
|---|---|---|
| 1 | Serial TXD | Used for configuration and firmware update |
| 2 | Serial RXD | Used for configuration and firmware update |
| 3 | GND | GND |
| 4 | PWR | Primary Power 8-32V |
3 Getting Start
Core function
Real time read the RFID card in band of 125KHZ and band of 13.56MHZ
| Item | Description |
|---|---|
| Dimension | Approximate 966420mm |
| Weight | About 90g |
| Operating Voltage | DC 8V to 32V |
| Operating Temperature | -20℃ ~ + 80℃ |
| RFID Frequency | 125KHZ ，13.56MHZ and 5817MHz |
| Indicator LED | red, yellow, green |
FCC warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Operating Frequency 125 kHz,13.56 MHz,5817MHz
Type of modulation 125 kHz: OOK,13.56 MHz: ASK5817MHz: ASK
Antenna Type: 125 kHz: Coil Anrenna,13.56 MHz: PCB Antenna,5817MHz: PCB
Antenna
Antenna Gain: 125 kHz: 0dBi(Max),13.56 MHz: 0dBi(Max),5817MHz: -2dBi(Max)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>