XHDATA D-608 Hand Cranked Emergency Power Generation Global Band Radio User Manual
- June 17, 2024
- XHDATA
Table of Contents
- XHDATA D-608 Hand-Cranked Emergency Power Generation Global Band Radio
- Product Specifications
- Product Usage Instructions:
- FAQ
- Function Operation
- Function Operation
- Operation Introduction
- Use of WB / NOAA / ALERT
- Bluetooth/MP3 Playback Function
- System Reset
- How to Use the Charging Function
- Mobile Phone Emergency Charging
- Safe Use of Lithium Batteries
- Performance Parameters
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
XHDATA D-608 Hand-Cranked Emergency Power Generation Global Band Radio
Product Specifications
- Hand-Cranked Emergency Power Generation Global Band Radio
- WB/NOAA Weather Warning Radio
- 3000mAH power battery
- Wireless BT music playback and wireless calling functions
- DC 5V IN Type-C charging socket
- FM/MW/SW/WB radio bands
- TF card playback support
Product Usage Instructions:
Power Supply:
Please install the positive and negative terminals of the 3.7V (18650)
lithium battery correctly into the battery compartment. Use DC 5V IN Type-C
charging socket for power supply.
Power On/Off:
To power on, short press the power button until the display shows ON. To
power off, short press the power button until the display shows OFF.
Radio Operation:
Note: The following operations need to be set in the shutdown state.
Set Frequency Coverage:
Different countries have different medium wave and FM frequency coverage.
Set FM frequency range by long pressing (BAND) and then short pressing to
switch between FM receiving frequency ranges. The screen will display the
frequency coverage options.
Function Operation:
The device features various functions accessed through different keys.
Reset, flashlight, keyboard lock, volume adjustment, alert display, music
controls, and radio station management are some of the key functions
available.
Charging:
Use the DC 5V IN Type-C charging socket for charging the internal battery.
The charging indicator will show the status of the battery charge.
Bluetooth Playback/TF Card Playback:
Switch between Bluetooth playback and TF card playback modes using the
designated keys. Play/pause music and adjust volume as needed.
FAQ
Q: How do I switch between radio bands?
A: Use the BAND key to switch between FM/MW/SW/WB radio bands. After
changing the band, adjust the receiving frequency range accordingly.
Q: How do I adjust the volume?
A: Use the V-/V+ keys to manually adjust the volume by short pressing or
automatically adjust by long pressing.
3000mAH power battery strongly guarantees emergency use of mobile phone charging Wireless BT music playback and wireless calling User Manual Hand- Cranked Emergency Power Generation Global Band Radio WB/NOAA Weather Warning Radio functions
Function Operation
Function Operation
DISPLAY
Operation Introduction
Power Supply
- Please install the positive and negative terminals of the 3.7V (18650) lithium battery correctly into the battery and battery compartment.
- DC’5V IN Type-C charging socket power supply
Power on/off
- U Power on: Short press the power button, the display shows “ON”
- U Power off: Short press the power button, the display shows “OFF”
Radio Operation
The following operations need to be set in the shutdown state
Set frequency coverage
-
• Different countries have different medium wave and FM frequency coverage Please set according to the conditions of different countries.
-
• FM frequency range setting: After long pressing (BAND), short press to switch the FM receiving frequencyrange respectively. The screen will show 64,76,87,87.5, 14-70805 -2, 76108H2, 8 -008 and 87.5-108MH
-
1. When the FM receiving frequency is selected: 64-108MHZ/76-108MHz/ 87-108MHz:
2. The corresponding MW frequency coverage range is automatically set to: 522-1620KHz (9K) (Using Asia, Europe, Africa and Oceania)
3. In this state, the temperature will be displayed in degrees Celsius (°C) -
1. When the FM receiving frequency is selected: 87.5-108MHz:
2. The corresponding MW frequency coverage is automatically set to: 520-1710KHz (10K) (applicable to North and South America)
3 .In this state, the temperature will be displayed in degrees Fahrenheit (°F)
Select band
- Short press the (power) button to (ON)
- Short press the (BAND) key to switch bands (FM/MW/SW/WB)
- Switch to short wave meter band: Press and hold the (BAND) button in the short wave band, the meter band icon flashes, and turn the shuttle to switch to each meter band.
- When receiving FM and shortwave, you can choose to use a whip antenna and rotate the antenna angle to get the best reception.
- Rotate the body angle for optimal reception sensitivity when using MW an LW
Search radio frequency
Adjust wireless frequency
- Manual scan frequency (VF)
- Short press (VF) key
- Turn the tuning knob slowly or quickly (tuning)
- Automatically browse radio frequency (VF)
- Long press the (SCAN) button to enter browsing. When a station is scanned, it will stop for 15 seconds. Short press (SCAN) to stop searching, and continue scanning without any operation.
Manually store a station
- Manually search for radio stations (VF)
- Select band
- Rotate (TUNING) to select the station frequency to be stored
- Short press the (MEMORY) button again to store the changed radio
- Short press the (MEMORY) button, the station number flashes in the upper right corner station
- Fully automatic scanning and storage of radio stations
- Select band
- Long press the key to automatically scan and store the entire band radio stations
- Shortwave single meter band automatic search mode
Quickly double-click the key in the shortwave receiving state to enter the current meter band scanning memory mode.
Tip
Radio signals will be affected by factors such as season/time period/weather, receiving environment, electromagnetic interference, and receiving antenna angle and azimuth. Therefore, ATS memory should be updated frequently
Manually recall stored radio stations (VM)
- After the radio station search is completed, you can short press the (VM) key to enter the memory radio radio mode.
- Turn the (TUNING) shuttle button to recall each stored radio frequency
Automatically retrieve the stored radio frequency (VM)
- Select the band and short press the (VM) key. Long press (SCAN) to enter automatic browsing mode
- Scan each memory station code for 5 seconds and press the SCANbutton to select listening. If there is no operation, continue scanning the next radio frequency.
How to delete stored radio stations
- Select the stored station to be deleted
- Short press the (VM) key to enter the memory radio mode.
- Select the band Turn the (tuning) button to select the digital station frequency you want to delete
- Press and hold the (DELETE) key for 3 seconds to display [DEL]. Then short press again to confirm the deletion
Delete all stored stations for the current band
- Short press the (VM) key to enter the memory radio mode. Select the band
- Press and hold the (DELETE) key until the sub-display area displays (ALL), release it and short press again to confirm deletion of all stored stations in this band
- Skype:radiwow
- Email:xhdatacn@gmail.com
- Facebook: XHDATA
- https://www.xhdata.com.cn
- Whatsapp: +86 18025193267
Use of WB / NOAA / ALERT
WB/NOAA channel reception range
There are 7 channels in total: channels 1-7 (162.400-162.550MHz)
Manually search for WB/NOAA radio channels
- Select the band: short press the (BAND) button to WB, turn the (TUNING)
- Short press (power) button to (ON) to turn on shuttle to adjust the receiving frequency (162.400-162.550MHz)
- Select the band: short press the (BAND) button to WB, turn the (TUNING)
- Short press (power) button to (ON) to turn on shuttle to adjust the receiving frequency (162.400-162.550MHz)
Automatically scan WB/NOAA radio channels and warn of reception methods
- Short press (power) button to (ON) to turn on
- Select the band: Short press the (BAND) key to switch to any radio band
- Short press (power) button to (ON) to turn on Long press the (ALERT) key to directly enter the “NOAA” automatic scanning warning reminder state. When any “NOAA” channel issues a disaster warning, the machine will immediately send out a “sos” sound and light synchronized warning to remind the user to receive NOAA disaster warning information.
- Long press the (ALERT) key to eliminate the “S0S” warning signal.
- This machine automatically enters the “NOAA” disaster warning information receiving channel to receive voice warning information
SOS Danger Distress Information Usage
In any state, long press (S0S) to turn on the sound and light synchronized
distress signal. Press and hold again to close
Use of Flashlights and Lights
- In any state, short press (TORCH) to turn on the flashlight, there are 3 brightness levels to choose from, short press (TORCH) repeatedly to adjust the brightness and turn off the flashlight.
- In any state, short press the (LAMP) button to turn on the lighting. There are 3 brightness levels to choose from. Press (LAMP) repeatedly to adjust the brightness and turn off the lighting.
Stereo headphone output
This machine is equipped with FM and Bluetooth/MP3 stereo headphone outputs.
Use 3.5 headphone jack.
Tip
Stereo will not turn on when the station is using a mono radio or reception is
weak
Bluetooth/MP3 Playback Function
TF card mp3 player
- Insert TF card with music files
- Short press the (M) key to enter the TF card MP3 playback state
- Short press these two keys Short press these two keys to select the previous and next song [tuning also selects songs]. .Long press to achieve fast rewind and fast forward kinetic energy
- play/pause function button
- In the TF playback state, long press the (BAND) key icon to display and enter the single loop playback mode. Long press the icon to close and enter all loop playback mode
Bluetooth function operation
Music playback
- Short press the key to enter the Bluetooth playback state
- Open the Bluetooth connection interface of the mobile phone, search for the Bluetooth connection name (D-608) and connect, it will display successful connection
- Short press the ( ) or ( ) key or turn the (tuning) button to select Bluetooth function operation You can also select the song directly on your mobile phone.
Wireless calling
When the phone is in Bluetooth connection state, short press to answer the
call, and short press again to end the call.
Display content switch
In any use state: short press (ALERT) key repeatedly, The display area in the
upper right corner can be switched to: temperature display [signal strength
/signal-to-noise ratio] value, alarm time and (local time) and memory radio
frequency number
Display backlight switch
Press any button in any state to light up for 5 seconds and then turn off
automatically
Sleep timer shutdown mode
- Long press the ( ) key to turn on the phone, then the sleep icon flashes
- Turn the (TUNING) key to select the startup time [01-120] and it will flash for 3 seconds to confirm automatically.
Memory sleep timer shutdown mode
Short press the ( ) key to enter the memory power-on state
Cancel sleep timer shutdown mode
Press and hold the ( ) button to turn on the phone, turn the (TUNING) shuttle
button, and adjust the sleep time zone to (ON).
Set clock
- In the power off state, press and hold the key
- The clock will flash. Turn the (TUNING) shuttle to adjust the hour, short press to confirm, adjust the minutes, and then press the short press to confirm. The adjustment is completed.
Alarm and scheduled shutdown function
- Turn the alarm on and off (set when the phone is turned off)
- Short press the (M) key, the alarm icon lights up and the alarm is turned on. Short press the alarm icon again to turn it off
Adjust the alarm turn-on time and alarm duration (adjust when power off)
- Press and hold the (M) key, the time in the secondary display area in the upper right corner flashes
- Rotate the [TUNING] shuttle button to adjust the hours and press to confirm. Then adjust the minutes and press to confirm.
- At this time, the main display area will adjust the alarm on duration to flashing, and turn the [Tuning] key within (0-60) minutes to select and then press briefly toconfirm the adjustment is completed. Alarm icon lights up
Set how the alarm turns on
-
Radio alarm mode
- Turn on the power, select the radio frequency you want to use as the alarm, and adjust the appropriate volume
- Press and hold the (M) key, the alarm icon will flash for 3 seconds to confirm automatically, and the setting is completed.
-
Play TF card music alarm mode
- Insert the music TF card and turn on the power Short press the (M) key to enter TF card playback and adjust the appropriate volume.
- Press and hold the (M) key, the alarm icon will flash for 3 seconds and then automatically confirm that the setting is completed.
Operations after turning on the alarm clock
- After using the alarm clock to start the computer, you need to turn it off Short press the ( ) key twice to turn off the machine
- To cancel the radio alarm clock lock frequency and music alarm clock lock, please short press the ( ) key
Keyboard lock
Press and hold for 5 seconds to lock the keyboard and (Tuning) button, and the
icon will light up. Press and hold for another 5 seconds to unlock the
keyboard and (Tuning) button.
System Reset
In rare situations such as accidental interference, the system may experience keyboard and breeding button malfunctions, display confusion, etc. Press the reset button with a sharp object to reset the system
How to Use the Charging Function
Normal charging operation
- When the machine’s power display is low or the battery is exhausted , please charge it immediately
- Connect one end of the USB charging cable to the DC5V_USB output adapter, and plug the other end into the local (TYPE-C) jack [the adapter output is DC5V (≥ 1A)] to charge the machine. The display shows ( ) charging symbol flashing
- When the icon is displayed, the charging symbol will not flash, indicating that it is fully charged.
Solar charging operation
Simply point the solar panel of the device directly towards the sun to
charge the device in an emergency
Hand crank emergency charging operation
Pull out the machine’s rocker arm and rotate the rocker arm to charge the
machine in an emergency.
Tip
In order to avoid interference during charging and insufficient charging
current, which may cause automatic shutdown and longer charging time, please
do not use the machine in the early stages of charging
Mobile Phone Emergency Charging
In any state, plug in the USB 5V output power port to charge the mobile phone in an emergency.
Tip
Please do not use the radio function when using your mobile phone for
emergency charging. The operation of the boost circuit will cause serious
interference to the radio
Safe Use of Lithium Batteries
- The machine is powered by (18650 3.7V) rechargeable lithium battery. Only use batteries of the same and equivalent specifications. Improper use of lithium batteries may cause explosion!
- Do not charge non-rechargeable batteries!
- Do not charge non-rechargeable batteries. Batteries must not be placed in high-temperature environments such as moisture, explosion, battery smoke, etc!
- Do not disassemble, impact or knock the lithium battery. If the lithium battery is deformed or bulged, it cannot be used
- Please use a safe and qualified adapter for charging
- In order to maintain the service life of the lithium battery, if the machine is not used for a long time, please charge it at least once every three months
Performance Parameters
-
Radio frequency range
- FM: 64-108 MHz / 76-108 MHz 87-108 MHz / 87.5-108 MHz
- MW:522-1620khZ(9K) / 520-1710 KHz(10K)
- Performance Parameters
- SW: 1711-29999 KHz (5K)
-
Radio noise limit sensitivity
- FM: (S/N=30dB): ≥ 2HV
- MW: (S/N=26dB): ≥ 1 mV/m
- SW: (S/N=26dB): > 18MV
-
Radio selectivity
- FM: 60dB
- MW: 60dB
- SW: 60dB
-
Maximum number of memory stations
- FM: 100 pcs
- MW: 100 pcs
- SW: 300 pcs
-
Maximum output power: 2.0 W
- Headphone impedance: 16-32
-
Speaker specifications: 40mm (double iron boron 16 cores) 4Ù/5W
-
TF card: support 32G
-
Audio playback format:Mp3/ WMA/ WAV/ FLAC
-
Bluetooth transmission distance: 10M
-
DC: 3.7V (18650) power battery 3000mAh
-
DC 5V input: DC5V/1000mA
Skype:radiwow
E-mail:xhdatacn@gmail.com
Facebook: XHDATA
https://www.xhdata.com.cn
Whatsapp: +86 18025193267
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>