OMNIVISION OS04D10 High Performance Low-Power 2K 4 Megapixel Image Sensor Owner’s Manual

OS04D10 High Performance Low-Power 2K 4 Megapixel Image Sensor
Owner’s Manual

OS04D10
4 megapixel product brief

OS04D10 High Performance Low-Power 2K 4 Megapixel Image Sensor

High-performance, Low-power 2K 4-megapixel Image Sensor for Consumer Security and Surveillance Cameras
The OS04D is a 4-megapixel (MP) image sensor that brings 2K resolution digital images and high-definition (HD) video at 30 frames per second (fps) to IP and HD analog  security cameras, including smart home, doorbell and baby monitoring devices. The OS04D CMOS image sensor utilizes a high-performance backside-illuminated (BSI) pixel  while also providing 40% power consumption savings, as well as improvements of over 30% in signal-to-noise ratio (SNR1) and 40% in sensitivity when compared with its  predecessor.
The OS04D image sensor’s 2.0-micron (µm) BSI pixel is based on OMNIVISION’s Purace® Plus technology and enables higher sensitivity, ultra-low noise and better overall image quality. Select conversion gain (SCG) allows the sensor to flexibly select low and high conversion gain depending on the lighting conditions. On-chip auto explorer  control (AEC) and auto gain control (AGC) further accelerate system-on- chip (SoC) booting time. Low power consumption is beneficial for battery operated devices,  especially doorbell security cameras. It comes in a cost-effective 1/3-inch optical format and is pin-to- pin compatible with OMNIVISION’s OS04L image sensor as well as  other new products that will be launched in the future.
The OS04D supports MIPI interfaces.
Find out more at www.ovt.com.

Applications

Ordering Information

• OS04D10-A44A-001A-Z (color, lead-free) 44-pin CSP Product Features
• security surveillance systems
• IP cameras
• HD analog cameras

Technical Specifications

• active array size: 2560 x 1440
• maximum image transfer rate: – 2568 x 1448:30 fps
• power supply: – analog: 2.8V – I/O: 1.8V – core: 1.2V
• power requirements: – active: -76 mW – standby: 5 PA
• output interfaces: 10-bit 2-lane MIPI
• out formats: 10-bit RAW RGB
• temperature range: – operating: -30°C to +85°C
• junction temperature –
• stable: -20°C to +60°C junction temperature
• lens size: 1/3″
• lens chief ray angle: 12° linear
• scan mode: progressive
• pixel size: 1.998 pm x 1.998 pm
• image area:
  5130.864 pm x 2893.104 pm

Product Features

• programmable controls:
  – frame rate
  – mirror and flip
  – cropping
  – windowing

• supports 2×2 color binning function

• support for output format: 10-bit 2-lane MIPI TX

• SCCB control interface for register programming

• supports MIPI serial output interface (1-lane/2-lane)

• dynamic DPC

• supports image sizes: – 2568 x 1448 @ 30 fps

• supports automatic black level calibration

• supports multi-camera synchronous function

• supports fast boot function

Functional Block Diagram

https://www.ovt.com/products/os04d10/

     4275 Burton Drive
Santa Clara, CA 95054
USA
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com

OMNIVISION reserves the right to make changes to their products or to discontinue any product or service without further notice. OMNIVISION and the OMNIVISION  logo are trademarks or registered trademarks of Omni Vision Technologies, Inc. Pure Cell is a registered trademark of Omni Vision Technologies, Inc. All  other trademarks are the property of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>