LEIFHEIT 11925 Regulus PowerVac 2-In-1 Cordless Vacuum Cleaner Instruction Manual

: June 4, 2024
: LEIFHEIT

Table of Contents

SAFETY INSTRUCTIONS
OPERATING INSTRUCTIONS
Technical data
Scope of delivery
Proper use
Before first use
Application
Cleaning and maintenance
Optional accessories
Disposal
Conformity/Declaration of conformity
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

REGULUS
POWER VAC 2in1 LEIFHEIT 11925 Regulus PowerVac 2 In 1 Cordless Vacuum
Cleaner

Instruction Manual LEIFHEIT 11925 Regulus PowerVac 2 In 1 Cordless
Vacuum Cleaner - fig

Dear customer,
Congratulations on your new cordless vacuum cleaner Regulus PowerVac 2in1! We believe you have made an excellent choice in this purchase and have acquired a high-quality product from Leifheit. Please read the operating instructions before using the Regulus PowerVac 2in1 and keep them in a safe place for later use or for subsequent owners. They will help you to use the device sensibly and correctly and to avoid misuse from the start. Pay particular attention to the safety instructions provided in this manual. We hope that you are more than satisfied with the cordless vacuum cleaner. Simply call us should you have any questions or suggestions about our product. The Leifheit team will be happy to help you.
International PH.: +49 26 04 97 70
Monday to Friday 8.00 to 18.00 CET
If you would like to write to us, there is a contact form available on the Leifheit homepage www.leifheit.de or you can use the post service.
Regards, Your Leifheit Team

SAFETY INSTRUCTIONS

Read the instruction manual fully before using the appliance for the first time. Basic safety measures are always to be observed when using electrical equipment:

Only use the device as instructed.
Never use the device if cables, plugs, housing, or power supply units are damaged.
Repairs may only be made by authorized customer service technicians. Never open the basic unit alone. The individual components of the basic unit may not be disassembled, repaired, or modified.
The device may only be charged with the charger included. Ensure that the voltage stated on the power supply unit label corresponds with the supply voltage.
Ensure that the device and the power supply unit do not get wet. Do not touch the device or power supply unit with damp or wet hands.
Do not store, charge or use the device outdoors, but always in the room the temperature in a dry place.
Do not use the device close to flammable gases.
Protect the device from intense heat and do not place it in direct sunlight.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Unplug the equipment from the main power supply before cleaning or maintenance.
Do not touch the red brush roll if the device is switched on. Ensure that the running brush roll does not come into contact with the body or items of clothing.
Keep the device out of reach of children. Do not leave the device unattended if it is switched on.
Keep packaging material like plastic bags and the like away from children. Risk of suffocation.
ONLY SUITABLE FOR HOUSEHOLD USE!

OPERATING INSTRUCTIONS

You can also find the operating instructions on the Leifheit homepage at www.leifheit.com

Technical data

Model description	Regulus PowerVac 2in1
Duration	Up to 40 minutes in Eco Mode
Charging time	Approx. 3.5 hours
Dust container volume	0.45 l
Weight	Approx. 2.8 kg (without accessories)
Output	125 Watt

Scope of delivery

When unpacking, check if the content is complete and check for possible transport damages.
If anything is wrong, please contact your dealer or Leifheit’s Customer Service.

A) handle part
1. On/Off button
2. Vacuum mode button I/II
3. Release button handle
4. Release button floor cleaner head
5. Front LEDs floor cleaner head
B) Floor cleaner head
6. Fixing cleaning brush
7. Release slide cleaning brush
8. Removable cleaning brush| C) Handheld
9. Battery unit
10. Release button battery unit
11. Release button handheld
12. On/Off button handheld
13. Suction mode button handheld I/II
14. Release button dust container
15. Dust filter
16. Coarse filter (2 parts)
17. Dust container| D) Charging station
18. Top part charging station
19. Lower part charging station
20. Coaxial power connector charger
21. Charger
22. Charging socket
E) Ceiling nozzle
F) 2in1 brush nozzle
---|---|---

Proper use

Please note that this product is only intended for household use. Leifheit provides no manufacturer warranty for commercial use.
The device is only intended to vacuum dry floors or dry material. Do not use it to vacuum liquids, sharp or pointed objects, hot or cold ashes, burning cigarettes, or fine dust (e.g. flour or cement dust).
The device may not be used to vacuum on people or animals.
Do not cover air intake or air outlet while using the appliance. Ensure that the openings are not blocked or covered by disruptive objects.
Only use the device with accessories and spare parts permitted by Leifheit.
Any use going beyond this is considered improper and can cause damage or injury. The manufacturer is not liable for damages resulting from this; the user alone carries the risk for this.

Before first use

Setting up/Assembly
Put the upper part of the charger (18) on the lower part (19). Insert the coaxial power connector of the charger (20) into the charging socket (22). Ensure there is sufficient distance from sources of heat and moisture and place the charger on a solid and even surface. Connect the charger (21) to a power outlet. Insert the tube of the floor cleaner head into the tube of the lower part of the device until you hear it lock. Fold up the upper end of the handle part of the device. Shift the handheld down with the suction opening into the suction opening of the handle part of the device and press the handheld into the handle until it locks.
Charging the battery
The battery must be charged fully before first use.

Please ensure that the handheld is locked securely into the base attachment and that the device is switched off before you charge the device.
Insert the device into the charger. The On/Off button on the handheld (12) blinks once a second as long as the device is charging. Once the battery is charged, the button light goes off and subsequently blinks once a minute for 30 minutes.
Store the device in the charge station if you are not using it.

Note: The battery may only be charged using the charger supplied. The charger is only to be used together with the Leifheit battery vacuum cleaner. The battery unit can be removed/exchanged with the device. Ensure that the battery unit is pushed into the handheld until it locks.

Application

Cleaning with the base attachment

Remove the device before switching it on from the charge station.
The device is started or stopped by pressing the On/Off button. The symbol ****(12) will be green after it is switched on. The vacuum function starts and the cleaning brushes turn. The front LEDs of the floor cleaner’s head will be lit when the device is switched on.
Suction mode 1 is activated automatically when switched on. Use the Suction Mode button (2) to change between suction modes. Use Suction Mode 1 for maximum battery life. Suction Mode 2 is especially well suited for heavier dirt or vacuum carpets. The symbol I/II (13) will be lit constantly if Suction Mode 2 is selected.
The Regulus PowerVac 2in1 is equipped with especially soft rolls, making it particularly well suited for sensitive floors. Ensure that no pointed objects get stuck in the brushes or in the wheels, as these could damage the floors.

Cleaning with the handheld

Remove the handheld from the lower part of the device by pressing the handheld release button (11) and switch the device on using the On/Off button (12). If required, select the suction mode using the suction mode button on the handheld (13).
Accessories: the cleaning attachments will be inserted into the suction duct of the handheld for use (see fig.1) and can be attached to the charge station for safe storage.

Cleaning and maintenance

Emptying the dust container
Press the dust container release button (14) to remove the dust container.
Take the filter unit out of the dust container by holding the two fixing brackets and empty the container into a waste disposal bin (see fig. 2).

Cleaning the filter
Note: Clean the filter regularly to maintain consistently high cleaning performance.
Drain the coarse filter (16). If necessary, the transparent casing can be removed by turning it slightly, the arrow pointing to the open lock (see fig. 3). To clean the dust filter (15), remove the coarse and dust filters by lightly pressing the tab (see fig. 4). Beat the dust filter out until the visible dirt is removed (see fig. 5). The filters can be cleaned under running water. Do not use an additional cleaning agent. Ensure that the filters are completely dried before the filter unit is replaced (see fig. 2).

|
---|---

Cleaning the brushes
Press the slide switch on the lower side of the floor cleaner head (7) and remove the fixing of the cleaning brushes (6).
Remove the cleaning brush (8) and dispose of loose dirt. Long hair and fibers can be easily removed by cutting the fibers by running the cutting gouge of a pair of scissors along the entire length of the brushes.
Replace the cleaned brushes and the fixing for the brushes and lock them with the slide switch.

Another cleaning
If necessary, remove the floor cleaner head from the device by pressing the release button (4) on the floor cleaner head and remove the disruptive objects from the suction duct.

Optional accessories

The battery unit can be removed/exchanged with the device. Only use the device with the original vacuum batteries from Leifheit!
Removing/exchanging the battery unit
Press the release button battery unit (10) and slide the battery unit (9) from the device. Push the battery unit into the handheld until it locks before use.

Disposal

The battery unit must be removed before disposing of the device. To do this, disconnect the device from the mains power supply and remove the battery unit from the handheld by pressing the release slide, and then properly remove the battery unit. The symbol on the product or its packaging indicates that this product is not to be treated as normal household waste, but rather has to be given to a collection point for the recycling of electrical and electronic devices. You can find further information about your municipality, communal disposal businesses, or the company from which you bought the product.

Conformity/Declaration of conformity

Leifheit hereby declares that this device is conformant with the basic requirements and the common relevant provisions of the Directives 2014/30/EU, 2006/95/EG, 2014/35/EU (RoHS) and Regulation 1907/2006/EU (REACh). You can find the EU declaration of conformity at www.leifheit.de.

Troubleshooting

Breakdown	Possible cause	Solution
The device does not start	The battery is not charged.	Charging the battery.
Cleaning ability weakens	The dust container is full.	Empty the dust

container.
The filter is clogged/very dirty.| Clean the coarse and dust filter.
The cleaning brush is dirty/ blocked.| Remove the cleaning brush and clean it.
The suction duct is blocked.| Remove the floor cleaner head and remove the disruption objects.
The device is switched on, the front LEDs do not light, and the brush does not rotate.| The cleaning brush is dirty/ blocked.| Remove the cleaning brush and clean it.
Low battery life| The battery was not fully charged.| Charge the battery.
The battery is no longer at full capacity following long use.| Exchange battery unit if required.
The On/Off symbol blinks| The battery only lasts for approx. 1 minute.| Charge the battery.
Dust container can- not be inserted into the handheld.| Filters are not inserted correctly.| Insert filters as described in section 6.
On/Off symbol and Suction Mode sym- bol blink alternately for 15 minutes, then switches off.| If the temperature of the device is too low or too high, this can lead to a short-term malfunction of the device.| Leave the device to stand for a few minutes at room temperature, and switched it off.
The device must be cleaned or maintained.| Release the battery unit and clean the device (see section 6.). Install the battery unit. If the blinking continues, release the battery unit and contact your seller where you purchased the device.
Any other failure| | Contact your seller where you purchased the device.

LEIFHEIT 11925 Regulus PowerVac 2 In 1 Cordless Vacuum Cleaner - qr
code

https://www.leifheit.com/en-en/service/sustainability

Quality and Design by Leifheit AG
Leifheitstraße 1
D-56377 Nassau/Germany
www.leifheit.comTechnische Änderungen vorbehalten / Subject to technical modifications 04/2022