Jaycar GH1088 Remote Controlled Fart Machine User Manual
- June 9, 2024
- Jaycar
Table of Contents
GH1088
REMOTE CONTROLLED
FART MACHINE
User Manual
Installation:
- Remove the screw located on the battery cover by using a small Phillips screwdriver.
- Insert 4 x AA (not included) batteries by using the correct polarity in the unit.
- Place the battery cover back on and tighten the screw securely in place.
Note: The remote control comes installed with a 12V A23 battery.
Operation:
- Press the power switch to On which is located on the right side of the unit.
- Press the remote button to release the fart sound, each sound will last several seconds.
- Press the power switch to Off when not in use.
Note: The different noises will automatically cycle through.
Safety:
- Do not pull apart the casing of the fart machine or remote control while turned on to avoid damage and injury.
- Keep the fart machine away from high temperatures as it may cause damage to the unit and batteries.
- Do not expose the fart machine to water, moisture or liquids.
Specifications:
Wireless Frequency: 433MHz
Remote Control Range: Up to 15m
Play Time: Up to 5 Hours
Batteries:
Fart Machine: 4 x AA (Not Included)
Remote Control: 1 x 12V A23 (Included)
Dimensions: 120(H) x 95(W) x 40(D)mm
Distributed by:
Electus Distribution Pty Ltd
46 Eastern Creek Dr,
Eastern Creek NSW 2766
Australia
Ph 1300 738 555
Int’l +61 2 8832 3200
Fax 1300 738 500
www.electusdistribution.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>