Shenzhen Kafulle Electronics KF-9201 USB wireless charger Instruction Manual
- June 5, 2024
- Shenzhen Kafulle Electronics
Table of Contents
4 USB wireless charger KF-9201
Instruction Manual
7141-20
1 x Lunation Wireless Charging Station 1
x 1.2m AC Removable Power Cable
1 x Instruction Manual
Input power: AC 100-240V 50-60HZ USB
Outputs: 5V/2.4A max, total 5.4A.
Wireless Output: DC 5V/1A Long press the LED Nightlight to turn light ON,
repeat to turn the light OFF.
Connecting charging station: Take provided AC removable power cable, insert
cable into the power cable inport on the charging station. Once connected to
the charging station, plug-in power cable to wall power source.
Charging mobile phones and other electronic devices: The charging station has
4xUSB output ports, with a maximum out 2.4A Connect the desired cable to your
mobile phone/device using the appropriate connector. Connect the other end of
the charging station.
Remove desired cable from your mobile device when it is fully charged.
Charging Mobile phones and other electronic devices with wireless output.
Place wireless charging enable device on Wireless Charging Pad by setting
device on the phone stand. It will automatically charge.
Note: In order to charge devices, use only the accessory cable or the
cable included with your own device by the manufacturer. This device complies
with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: This device
may not cause harmful interference, and This device must accept any
interference received, including interference that may cause undesired
operation.
Warning: Approval by the party responsible for compliance could void the
user’s authority to operate the equipment.
WARNING When using this product, basic precautions should always be
followed, including the following: Read all the instructions before using the
product. Charge the power bank fully before initial use. The unit’s full
performance is achieved only after 2 or 3 completed charge and discharge
cycles.
To reduce the risk of injury, close supervision is necessary when the product
is used near children.
Do not expose the device to moisture.
Do not use the device in excess of its output rating.
Overload outputs above
Do not use the device if damaged or explosion or risk of injury.
Do not disassemble the device. Take it to or repair is required. Incorrect
reassembly or temperatures above 212ºF may cause explosion. repair person
using only identical replacement parts. This will ensure that the safety of
the product is maintained.
What’s included:
Features:
LED Nightlight:
Instructions:
FCC Statement:
SAFETY PRECAUTIONS: Wireless Charging Pad LED Nightlight Phone Stand
Power Cable Inport 4x USB Output Ports Made in China
WIRELESS CHARGING-ENABLED DEVICES:
iPhone 8/8Plus/X, Samsung Galaxy S8/ S8+/S7/S7 Edge/S6/S6 Edge, Nokia Lumia 1020/920/928, HTC 8X, HTC Droid DNA, HTC Rzound, HTC Incredibly 4G LTE, Moto Droid Turbo, Motorola Moto 360 Smart Watch, Moto Droid Maxx, Droid Mini, Google Nexus 6/4/5/7 (2013), LG D1L, LG LTE2, LG G2 (Verizon), Blackberry Z30 (Verizon)
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated With minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>