Aquasana AQ-CWM2-R Countertop Water Filter Instructions
- June 9, 2024
- aquasana
Table of Contents
Aquasana AQ-CWM2-R Countertop Water Filter
USING
- Twist filter chamber cap to the left and remove old filter from cap. Discard old filter.
- Remove plastic from new filter. Press new filter into filter chamber cap ensuring a snug fit. Insert into housing unit and twist right to close.
- Fill water tank and place on dispenser dock.
- Press dock button 3 times quickly. Light will illuminate red for 5 seconds.
- While red light is illuminated, press and hold dock button for 1 second. Light will blink red. While system flushes, light will change from red to blue staying blue for 5 seconds when flush is complete.
- Once the flush is complete, light blinks blue for 5 seconds, then illuminates solid blue for 5 seconds.
NOTE
Do not drink flushed water. Discard water.
Protect your investment and save money with our Water for Life program.
- CONTACT US TO LEARN MORE waterforlife@aquasana.com
- For the full list of contaminants filtered, scan to view the Performance Data Sheet on Aquasana.com.
- The recommended replacement frequency for the AQ-CWM-B is every 6 months or 300 gallons of use. Use only certified, genuine Aquasana replacement filters for continued contaminant removal and system performance.
AQUASANA, INC.
- 6310 Midway Road Haltom City, Texas 76117 USA 866.662.6885 • CAN877.332.7873 www.aquasana.com
References
- Aquasana Water Filters | Whole House Water Filtration Systems
- Aquasana Water Filters | Whole House Water Filtration Systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>