Xilence XC980 ARGB LED Water Coolers Instruction Manual

LiQuRIZER
Installation Manual

Component List

1. Radiator Mounting Screws
2. Fan Mounting Screws
3. Intel LGA2066/11 Standoff
4. AMD TR4 Standoff| 5) Thermal Grease
5. Insulatative Washer
6. Thread Nut
7. Knurled Tightening Nut| 9) Backplate
8. Long Screw
9. Intel Bracket
10. AMD Bracket
    ---|---|---

Mounting options on backplate

INTEL MOUNTING

Intel Bracket Mounting
Align the arrows on the bracket and the pump base, turn the bracket clockwise to secure it to the pump base.

• The Intel bracket is universal for LGA2066/2011/1150/1151/1155/1156/1366.

  • LGA1150/1151/1155/1156/1366 Installation

Choose the right mounting holes accordingto CPU Socket. Insert the long screws through the backplate and then through the mainboard.| Put the washer onto the long screws first, and then fasten the thread nuts onto the screws.
---|---
|
Clean the CPU surface and apply a thin layer of thermal grease onto the surface.| Put the pump onto the CPU.
Secure the block using the knurled tightening nuts.
|

• LGA2066/2011 Installation

Thread the LGA2066/2011 standoff into the
mounting holes on the mainboard.| Clean the CPU surface and apply a thin
layer of thermal grease onto the surface.| Put the pump onto the CPU.
Secure the block using the knurled tightening
nuts.
---|---|---
| |

AMD MOUNTING

• AMD Bracket Mounting
  Align the arrows on the bracket and the pump base, turn the bracket clockwise to secure it to the pump base.
• The AMD bracket is universal for TR4/AM4/FM2(+)/FM1/AM3(+)/AM2(+).
• AM4/FM2(+)/FM1/AM3(+)/AM2(+) Installation

Choose the right mounting holes accordingto CPU Socket. Insert the
long screws through the backplate and then through the mainboard.| Put the washer onto the long screws first, and then fasten the thread nuts onto the screws.
---|---
|
Clean the CPU surface and apply a thin layer of thermal grease onto the surface.| Put the pump onto the CPU.
Secure the block using the knurled tightening nuts.
|

AMD MOUNTING

• TR4 Installation

Thread the TR4 standoff into the mounting holes on the mainboard.| Clean the CPU surface and apply a thin layer of thermal grease onto the surface.| Put the pump onto the CPU.
Secure the block using the knurled tightening nuts.
---|---|---
| |

Fan & Radiator Mounting

Using the fan mounting screws to secure the fan(s) onto the radiator.| Using the radiator mounting screws to secure the radiator to the case panel.
---|---
|

Installation of RGB lightning

• Note: RGB function is not available on FROSTFLOW X Series.

  • by using mainboard RGB control

  • By using internal RGB controller

  • By using RGB Splitter to connect pump/fans’ RGB cables

CAUTION
Wrong connection will damage the device and cause mal-function!

| Press this button to switch the fan into dynamic modes:
Blinking mode (on/o ): 7 di erent colors in turn -> one of these colors
Changing mode: 7 colors in trun -> 7 colors in turn backward -> RGB in turn
Breathing mode: 7 colors in trun -> 7 colors in trun backward -> RGB in turn
---|---
| Press this button to switch the fan int xed single color mode:
There’re up to 20 di erent colors for choice including green, blue, red, orange, purple, white, etc.

| 1) In dynamic mode, this button will change the color switching speed;
2) In static mode, this button will control the brightness of the lighting;
3) Long press this button trt press to turn on the lighting.

XILENCE GmbH
Lavesstraße 4
31137 Hildesheim
Germany

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>