Xilence XC971 LiQuRizer Water Coolers Instruction Manual
- June 9, 2024
- Xilence
Table of Contents
LiQuRIZER
Installation Manual
Component List
- Radiator Mounting Screws
- Fan Mounting Screws
- Intel LGA2066/11 Standoff
- AMDTR4 Standoff| 5) Thermal Grease
- Insulatative Washer
- Thread Nut
- Knurled Tightening Nut| 9) Backplate
- Long Screw
- Intel Bracket
- AMD Bracket
---|---|---
Mounting options on backplate
INTEL MOUNTING
Intel Bracket Mounting
Align the arrows on the bracket and the pump base, turn the bracket clockwise
to secure it to the pump base.
- The Intel bracket is universal for
LGA2066/2011/1150/1151/1155/1156/1366.
LGA1150/1151/1155/1156/1366 Installation
Choose the right mounting holes
accordingto CPU Socket. Insert the
long screws through the backplate
and then through the mainboard.| Put the washer onto the long screws first,
and then fasten the thread nuts onto the screws.
---|---
|
Clean the CPU surface and apply a thin layer of thermal grease onto the
surface.| Put the pump onto the CPU.
Secure the block using the knurled tightening nuts.
|
LGA2066/2011 Installation
Thread the LGA2066/2011 standoff into the mounting holes on the mainboard.|
Clean the CPU surface and apply a thin layer of thermal grease onto the
surface.| Put the pump onto the CPU.
Secure the block using the knurled tightening nuts.
---|---|---
| |
AMD MOUNTING
AMD Bracket Mounting
Align the arrows on the bracket and the pump base, turn the bracket clockwise
to secure it to the pump base.
- The AMD bracket is universal for
TR4/AM4/FM2(+)/FM1/AM3(+)/AM2(+).
AM4/FM2(+)/FM1/AM3(+)/AM2(+) Installation
Choose the right mounting holes accordingto CPU Socket. Insert the
long screws through the backplate and then through the mainboard.| Put the
washer onto the long screws first, and then fasten the thread nuts onto the
screws.
---|---
|
Clean the CPU surface and apply a thin layer of thermal grease onto the
surface.| Put the pump onto the CPU.
Secure the block using the knurled tightening nuts.
|
TR4 Installation
Thred the TR4 standoff into the mounting holes on the mainboard.| Clean the
CPU surface and apply a thin layer of thermal grease onto the surface.| Put
the pump onto the CPU.
Secure the block using the knurled tightening
nuts.
---|---|---
| |
Fan & Radiator Mounting
Using the fan mounting screws to secure the fan(s) onto the radiator.| Using
the radiator mounting screws to secure the radiator to the case panel.
---|---
|
Installation of RGB lighting
- Note: RGB function is only available for LQ240RGB model by using mainboard RGB control
By using internal RGB controller
CAUTION
Wrong connection will damage the device and cause mal-function!
By using RGB Splitter to connect pump/fans’ RGB cables
| Press this button to switch the fan into dynamic modes:
Blinking mode (on/o ): 7 di erent colors in turn -> one of these colors
Changing mode: 7 colors in trun -> 7 colors in turn backward -> RGB in turn
Breathing mode: 7 colors in trun -> 7 colors in trun backward -> RGB in turn
---|---
| Press this button to switch the fan int xed single color mode:
There’re up to 20 di erent colors for choice including green, blue, red,
orange, purple, white, etc.
| 1) In dynamic mode, this button will change the color switching speed;
2) In static mode, this button will control the brightness of the lighting;
3) Long press this button trt press to turn on the lighting.
If you have questions,
- Please ask for professional help if you don’t know how to install.
- Make sure you’re working on a Power-Off PC.
- If you have any doubt about components list or product itself, please contact your original reseller/retailer.
- Xilence is always ready to offer our support. You can see below contact information.
- Descriptions are for your reference. Different models may vary in terms of components list.
XILENCE GmbH
Lavesstraße 4
31137 Hildesheim
Germany
www.xilence.net
[email protected]