PureMounts PM-BT600 Tilt Wall Mount Instruction Manual
- June 9, 2024
- PureMounts
Table of Contents
PureMounts PM-BT600 Tilt Wall Mount
INTRODUCTION
Read the entire instruction manual before you start installation and assembly.
If you have any questions regarding any of the instructions or warnings,
please contact your
local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may
result in instability causing possible injury.
- Mounts must be atached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed only on solid concrete walls or brick walls.
- Make sure that the supporting surtace will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting Screws provided and DO NOT OVER-TIGHTEN mounting screws.
- Ihis product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the
component checklist prior to installation. If any parts are missing or faulty,
telephone your local
distributor for a replacement.
MAINTENANCE: Check that the bracket is secure and safe to use at regular
intervals (at least every three months.
TOOLS REQUIEDS
INSTALLATION INSTRUCATIONS
PureLink GmbH
Von-Liebig-Sir. 1 0 I 48432 Rheine I Germany
Phone: +49 (0) 5971 800 299 0 Purelink GmbH hereby declares that this product
complies with Directive 1907/2006/EU and 2011/65/EU.