SILVER MONKEY SMA013 Magnetic Telescopic Phone Holder User Manual
- June 9, 2024
- SILVER MONKEY
Table of Contents
SILVER MONKEY SMA013 Magnetic Telescopic Phone Holder
Instruction
Carefully read these instructions before using the product. Keep it for future reference.
Safety information
- Avoid direct contact with water and other liquids.
- Do not use the device in a humid environment.
- Keep the device out of the reach of children. They may swallow some parts.
- Use the device only in accordance with the operating instructions.
- If the device stops working properly – contact us.
Package contents
- Holder
- Outside magnet (for phones without the case)
- Inside magnet (for phones with the case)
- Foil
- Extension arm with the suction cup
- User manual
Remember: Use only one of the magnets in the set. If you use thick phone case, attach the magnetic plate to the case instead of attaching it to the phone.
Intended use and construction
The holder allows you to mount the phone on the windshield or the cockpit.
Extension arm with the suction cup
- Suction cup
- Button
- Extension arm
- Extension arm length adjustment knob
- Ball joint
- Holder
How to use the product
- Peel off protective foil from the suction cup.
- Mount the suction cup in a clean and dry place. To do so, press the button , which is located below the extension arm .
- If you want to dismount the suction cup from the surface it is attached to – raise the button .
- Press the back part of the holder with the ball opening to the ball joint .
- Place the phone with the magnetic plate on the holder and adjust to the desired position.
Warranty and technical support
Your product is covered by a 24-month manufacturer’s warranty. For more
information go to
www.silvermonkey.com/support.
If you have questions about using the product – contact us at
kontakt@silvermonkey.com.
Manufacturer:
Silver Monkey sp. z o.o., ul. Twarda 18, 00-105 Warszawa, Poland.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>