silver monkey SMA231 Bicycle Bell for Apple AirTag Instruction Manual
- June 1, 2024
- SILVER MONKEY
Table of Contents
silver monkey SMA231 Bicycle Bell for Apple AirTag
Carefully read these instructions before using the product. Keep it for future reference.
Safety information
And ise the deceit wateria environmenids.
- Keep the device out of the reach of children. They may swallow
- Use the device only in accordance with the operating instructions.
- If the device stops working properly – contact us.
Package contents
- Finder
- Cover
- Battery CE2032
- User manual
- Screwdriver
- 2 screws
- Rubber strip and fastener
- 2 Anti-shock foams
Quick instructions
Power On / Off
Press the Silver Monkey Tag Switch on/off button once to turn it on.
It should long beep to indicate that it is powered on. To power off,hold the
same button for 3 sec. You will hear 2-time beep to indicate that your Silver
Monkey Tag is powered off.
Check For Updates
To use the Apple Find My app to locate this item, the latest version of iOS,
iPadOS, or macOS is recommended. The Find Items app on
Apple Watch requires the latest version of watchOS.
Add Your Silver Monkey Tag
Start The App, Open Find My app on your supported iPhone. Turn on the
bluetooth and network of your phone.
Connect Your Silver Monkey Tag
Press the switch on/off button once to power on your Silver Monkey Tag, then
“Add Other Item”. Once your Silver Monkey Tag is located, tap “Connect”, enter
a name and choose an emoji for your Silver Monkey Tag and tap “Continue”. Find
My will ask for confirmation to your Apple ID, Tap “Agree” and “Finish”, then
your Silver Monkey Tag will be set up and ready to be used.
Find Silver Monkey Tag When It’s Nearby
Open Find My app and select the “Items” tab or open the Find Items app on your
Apple Watch. Tap your item from the list. Tap “Play Sound” to make your Silver
Monkey Tag beep. Tap “Stop Sound” to stop the beeps once you find it.
Find Silver Monkey Tag Location
Open Find My app and select the “Items” tab or open the Find Items app on your
Apple Watch. Tap your Silver Monkey Tag from the list.
Your Silver Monkey Tag location will appear on the Map with a time stamp of
when the item was located. To navigate to the Silver Monkey Tag’s location,
tap ‘Directions” to open Apple Maps.
Notifications
Enable “Notify When Left Behind”. Open Find My app and select the “Items” tab
or open the Find Items app on your Apple Watch. Tap on your item from the
list. Under “Notifications”, enable the “Notify When Left Behind” toggle. You
will receive a notification when you leave your Silver Monkey Tag behind and
it’s no longer in range of your device.
Enable “Notify When Found”
Under “Notifications”, enable the “Notify When Found toggle. When your Silver
Monkey Tag is seen by another Find My network device,you will receive a
notification of its location.
Note: “Notify When Found” can only be activated when your Silver
Monkey Tag is out of range.
When Your Silver Monkey Tag Is Lost / Enabling “Lost Mode” Open Find My app
and select the “Items’ tab or open the Find Items app on your Apple Watch. Tap
on your item from the list. Under “Lost Mode” tap “Enable”. A screen detailing
Lost Mode will pop up, tap “Continue”. Enter your phone number or email
address and tap “Next” You may enter a message that will be shared with the
person that finds your item. Tap ‘Activate” to enable “Lost Mode”.
Note: When “Lost Mode” is enabled, “Notify When Found” is automatically enabled.
Note: When” Lost Mode” is enabled, your Silver Monkey Tag is locked and cannot be paired to a new device.
Resetting Silver Monkey Tag
Remove The Silver Monkey Tag From Find My App. Open Find My app and select the
“Items” tab. Tap on your item from the list. Please ensure ‘Lost Mode” is
disabled. Scroll to the bottom of the screen and tap “Remove Item”. A summary
will open, tap ‘Remove” to confirm.
Factory Reset Your Silver Monkey Tag
After successfully removing the Silver Monkey Tag from Find My app.
Press the Silver Monkey Tag’s switch on/off button five times rapidly and then
hold it a fifth time until you hear long beep. The Silver Monkey Tag is now
reset and ready to be paired to a new Apple ID/iOS device.
Unwanted tracking
If any Find My network accessory separated from its owner is seen moving with
you over time, you’ll be notified, Find My will send a notification to your
Apple devices. This feature is available on iOS or iPadOS 14.5 or later. This
features were created specifically to discourage people from trying to track
you without your knowledge.
Battery
The Tag uses a CR2032 battery. Only replace it with the same type of battery with the same voltage rating, making sure to correctly insert the battery (+ and -).
Battery replacement
- Separate the product into two parts by using the gap between the top and bottom cover.
- Remove the exhausted battery.
- Insert a new CR2032 battery into the device, ensuring the positive side is facing upward.
- Connect the bottom and top covers and gently snap them together.
Tag finder mounting in bell
- Open the bell ant take out tag finder.
- The bell is compatible with various tag sizes. Use additional anti-shock foam for safe installation..
- Fit the foams, then place tag finder in the bell and twist it in place.
- Screw the bell to the handlebars,
- Adapt the pads to the size of your steering wheel.
Button and sound description
Specification
SMA231
Working temperature| – 20 – + 60°C
Case| Case (bell)
Bluetooth range| Up to 100 m
Working time| Up to 12 months on a single battery
Compatibility| Bluetooth 5.2 / iOS 14.3 or higher
Waterproof| IPX67
Battery| CR2032 (replaceable)
Material| PC+ ABS
Apple certification| Yes – Find My
Dimension| 37 mm x 37 mm x 9 mm
Warranty and technical support
Your product is covered by a 24-month manufacturer’s warranty.
For more information go to
www.silvermonkey.com/support.
If you have questions about using the product – contact us at kontakt@silvermonkey.com.
Manufacturer: Silver Monkey sp. z o.o., ul. Twarda 18, 00-105
Warszawa, Poland.
Disposal and the EU compliance statement
We, as the manufacturer of this equipment, declare that it meets the rules of
the appropriate EU directives.
If you need a copy of the EU Declaration of Conformity- contact us.
Do not throw this equipment out with other household waste. This equipment is made from materials that may be harmful to the environment and human health, if the product is disposed of in the wrong way. When you need to throw away an old product, take it to a designated collection point.
To use the Find My app by Apple to locate this item, it is recommended to have
the latest version of iOS, iPadOS, or macOS installed.
The Find Items app on Apple Watch requires the latest version of watchOS.
Use of the “Works with Apple Find My” badge means that a product has been
designed to work specifically with the technology identified in the badge and
has been certified by th e product manufacturer to meet Apple Find My network
product specifications and requirements. Apple is not responsible for the
operation of this device or use of this product or its compliance with safety
and regulatory standards.
The Apple Find My network provides an easy, secure way to locate compatible
personal items using the Find My app on your iPhone, iPad, Mac, iPod touch, or
the Find Items app on Apple Watch,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>