rizoma MI BS323 Right Rear View Mirror User Manual
- June 9, 2024
- rizoma
Table of Contents
rizoma MI BS323 Right Rear View Mirror
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair, or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or additional regulations in force in your Country.
General conditions
Attention:
This component comes assembled for shipping purposes only. Tighten all
fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand, and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly
suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking,
bent, deformed, cracked, chipped, or worn, no matter how slight, immediately
have a RIZOMA dealer inspect the products before you ride again. In any case,
never try
to repair or modify the Rizoma products or their components, always replace
them with Rizoma original components. Rizoma products may not be compatible
with your motorcycle or with other aftermarket equipment installed before. For
your safety, Rizoma suggests always contacting your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
Mirror NAMIC SPORT
The Namic Sport mirror has been developed to shape the most modern and dynamic
fairing bikes. The shaft has a key role, its design is inspired by the super
sport bike aerodynamic lines, where volumes and profiles are focused on the
speed and dynamism ideas. Made from billet aluminum, using 3D precision
machining and surface anodization, which increase the quality and durability.
Its large reflective surface area complies with European homologation
standards and offers an optimal field of view. The convex glass has anti-
dazzle properties. Consult the website
www.rizoma.com, and click on the BS323 page in the
section “MEDIA”, to download the homologation document in PDF format.
PART NUMBER
BS323
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.
WARNING:
TO CLEAN YOUR MIRROR DON’T USE DETERGENT, AGGRESSIVE PRODUCTS, OR ABRASIVE
SPONGES THAT CAN DAMAGE OR SCRATCH YOUR MIRROR, BUT USE ONLY NEUTRAL DETERGENT
WITH COLD WATER.
INSTALLATION MIRROR
Step 1
Step 2
ADJUSTMENT MIRROR
Step 3.0
Step 3.1
ATTENTION:
ADJUST THE MIRROR TO FIND THE CORRECT POSITION, AFTER TIGHTEN THE SCREW WITH
THE TORQUE WRENCH.
Step 3.2
ATTENTION:
THE SHAFT CAN ROTATE CLOCKWISE OR COUNTERCLOCKWISE TO FIND THE CORRECT
POSITION. INSTALL THE MIRROR ON THE MOUNTING KIT BEFORE MAKING THE ADJUSTMENT
OF THE SHAFT.
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury. The action depicted is performed by professionals under strictly controlled riding conditions.
Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding styles, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.