COSTWAY HW67329 1-Piece Plastic Rattan Outdoor Day Bed User Manual
- June 4, 2024
- COSTWAY
Table of Contents
HW67329 1-Piece Plastic Rattan Outdoor Day Bed
User Manual
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY IteCANATION. PLEASE READ NO MP FOR FUTURE REFERENCE.
Before You Start
Read each step carefully before starting. It is very important to ensure each
step is followed in the correct order, otherwise, assembly difficulties may
occur.
Most of the board parts are labeled or stamped on the raw edges. Have a check
to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will
be used.
Keep the hand tools close at hand. Do not use power tools to assemble your
furniture. They may scratch or damage the parts.
Notice
- 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill.
- Place the item on flat ground to adjust and make sure it remains stable.
- Tighten up all screws with tools gradually.
- If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
- If the item is not stable, please loosen all the screws, adjust it on flat ground and tighten up all screws again.
- Note: If one or some screws are fully tightened during assembly, chances are the others will not align with holes. However, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.
Part List
Hardware List
STEP 1
Connect Right frame (A) & Side frame (C) with Bolt (3) & Washers (7)
STEP 2
Connect Left frame (B) & Side frame (C) with Bolt (3) & Washers (7)
STEP 3
Connect Seat frame (D) & Seat frame (D) with Bolt (5) & Washers (7) & Nut
(6)
STEP 4
Connect Seat frame (D) & Seat frame (D) with Bolt (5) & Washers (7) & Nut (6)
STEP 5
Connect part from Step 3 & Part from Step 4 with Bolt (5) & Washers (7) &
Nut (6)
STEP 6
Connect Front Right frame (E) & Front Left frame (F) with Bolt (3) & Washers
(7)
STEP 7
Connect Back Right frame (G) & Back Left frame (1-I) with Bolt (4) & Washers
(7)
STEP 8
Connect part from Step 1 & Part from Step 6 with Bolt (3) & Washers (7)
STEP 9
Connect part from Step 8 & Part from Step 5 with Bolt (3) & Washers (7)
STEP 10
Connect part from Step 9 & Part from Step 7 with Bolt (3), (4) & Washers (7)
STEP 11
Connect part from Step 10 & Part from Step 2 with Bolt (3), (4) & Washers (7)
STEP 12
Connect part from Step 11 & Leg frame (I) with Bolt (1) & Washers (7)
STEP 13
Connect part from Step 12 & Plastic feet corner (8) & Plastic feet (9) with
Bolt (2)
STEP 14
Connect part from Step 13 & Part from Step 1 & Part from Step 2 & Part from
Step 7 with Bolt (4) & Washers (7)
STEP 15
Put on Seat cushion ( J ) to complete Day bed
STEP 16
Put on Pillow (K) to complete Day bed
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting. The use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
Please protect your outdoor furniture with a cover when not in use since long-
term sunlight exposure will result in damage on the surface. In addition to
sunlight damage, wood and metal frame suffers when exposed to extremes in
temperature and humidity. Proper care and cleaning at home will extend the
life of your purchase. Following these important and helpful tips will enhance
your furniture as it ages.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>