Lucci LEDlux 269392 Smith LED Table Lamp Instruction Manual

Lucci LEDlux 269392 Smith LED Table Lamp

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of this luminaire. Please keep the instructions for future reference.

Warranty

• This luminaire is covered by a 3 year warranty from the date of purchase. Please retain proof of purchase.
• Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warrant

Installation Requirements

• Select a suitable location for this luminaire:
  • Ensure it is on a flat and stable surface.
  • This luminaire is suitable for indoor use only.
  • Do not place flammable material near or over the luminaire.
  • Ensure the luminaire is not installed in direct line of an air vent/system.
  • If the luminaire is placed in an area prone to moisture, ensure that the area is well ventilated and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty.
• Only use the supplied plug in LED driver with this luminaire.
• Take care not to pull any electrical wires during unpacking as this may damage the connection.
• Lay out all the components on a smooth surface and make sure there are no components missing before assembling. If parts are missing, return the complete product to the place of purchase for inspection or replacement.
• Check whether the luminaire has been damaged during transport. Do not operate/install any luminaire which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
• Do not plug into the mains power socket outlet before or during assembly. Only do so after the luminaire is fully assembled and is ready to use for the first time.

Installation Directions

1. Remove all packaging material from the product.
2. Plug the connector of LED driver (B) into the socket (C).
3. Plug the LED driver (A) into the mains socket outlet and ensure it is fully plugged in.
4. Press the switch button (D) to turn the luminaire on and off. Press and hold the switch button (D) to dim the luminaire.
5. You can charge your device by the USB port (E) on the base of the luminaire. The USB output is rated 5V/2.1A.

Note: If the charge current of your device is over the limit of the rated current, the charger will be self protected. In this case, your device will not charge unless you reconnect according to the rated output.

Installation Instructions

Safety tips

• Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning or making any adjustment to the luminaire.
• To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
• Young children should be supervised to ensure that they do not play with the portable lamp.
• Handle the luminaire and/or shade with care to avoid any damage or breakage.
• Select a suitable location away from liquids and hazards.
• Ensure that the fitting does not come in contact with corrosive chemicals, etc.
• To clean, wipe with a damp clean cloth. Never soak the fitting with water.

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>