Gastro-Cool GCFC100 Bottle Cooler Cooling Gondola Instructions
- June 4, 2024
- Gastro-Cool
Table of Contents
Gastro-Cool GCFC100 Bottle Cooler Cooling Gondola
Dimensions
Model no.| Front / Back| Sides| Control| Lock| Vent Holes| Glass cover /
Frame| Total wide
---|---|---|---|---|---|---|---
Width| Height| c| d| e| f| g| h| i| j| k| l| m| n
GCFC100| 622| 720| 502| 720| 150| 80| 70| 50| 392| 220| 514| 394| 60| 2259
- All measurements in mm. Please create printing files without bleed difference and without marked vent holes.
Vent holes will be cut out by hand during branding. Please don‘t position any important elements in the indicated areas.
Printing guidelines
Files must be created according to our cutfiles:
Filenames:
Please name the files correctly model/company/design/location for example:
DC400_company_motive_canopy
The location can be determined by facing towards the fridge, seeing the door
and products.
For example: left side, door, right side.
- Files should be in the exact total size (can be found in our cutfiles), do not scale
- Resolution: 300 dpi (at least 150 dpi)
- Print data in CMYK only
Formats
- JPG
- TIFF
- PDF – Please read the information on page 3 (Only in final page format, without bleed, without trim marks, without colour control strips, without information areas etc.)
Fonts
- Outline all fonts to paths/curves
- Convert text layers to a vector layer
Open files
Please do not send us any „open files “
(InDesign/Photoshop/Illustrator), unless stated otherwise.
Party bins/party freezer
The production of our bins is partly produced by hand. Therefore, minor
deviations in the product are possible.
The overlapping area of the prints should there-fore be filled.
The area around the ventilation holes should be free of text and important
illustration. We recom-mend 3 cm around the ventilation holes. Please don’t
draw the ventilation holes in your design. The holes are cut after fitting.
Plotts
-
As EPS file (Illustrator) or create PDF with paths
-
Monochrome plots can be created completely in solid color (preferably in magenta).
The color field must contain the later designation. E.g. white/glass decor -
Printed plots must have a separate path/contour cutting line in solid color (preferably in magenta) and be named „CutContur“.
-
Specify a Pantone or HKS no. for color plots. A foil is then selected that matches. If there is no matching foil, the color is printed on white foil and then plotted.
Attention: We don’t accept liability for designs with small elements less
than 1,5 cm.
We can’t guarantee that all elements will be transferred correctly.
Plotts must not be cleaned with a cleaning product or pressure.
The lower adhesive surface of the glass could remove or damage elements.
Do you have a mock-up of your device?
Please send us your mock-up and we will be happy to advise you. Also, we
reduce errors and show our signmaker how to apply the stickers.
Data transmission
- Send the high-resolution print data please contact Grafik@Gastro-Cool.com
- Up to 20 MB by e-mail
- For larger data volumes please use e.g. the free web server „www.wetransfer.com“ (up to 2 GB)
Please note that our deadline for print data is every Monday at 16:00. We need
to check your files before we can send it for printing.
If you have any questions, please contact: Mrs. Sabrina Hahn
E-Mail: Grafik@Gastro-Cool.com
Phone: +49 (0) 21 54 / 484 60-17
PDF files?
In the past time we increasingly recieved faulty PDF files. These faults
(often caused of wrong transparency reduction) are not visible on screen but
by printing (e.g. white frames around the pictures or white area in the
pictures).
This results in multiple prints and accordingly to additional costs.
To avoid this and to save and stabilize the branding prices we met agreements
with our printers. We decided only to print files in which these problems are
not yet occurred (EPS, JPG, TIFF).
Can still PDF files be printed?
Yes, of course. If you still like to send and print PDF files this is no
problem. But please note: We don‘t assume any liability for accuracy of PDF
data and printing, since, as described above, some problems couldn‘t be
tested.
If due to faulty PDF print data multiple prints are necessary the resulting
additional costs will be invoiced.