SECOMP 14.02.5027 USB 3.0 4-Port Hub User Manual
- June 9, 2024
- SECOMP
Table of Contents
USB 3.0 4-Port Hub
14.02.5027
User Manual
Safety Instructions
Always read the safety instructions carefully.
- Keep this User Manual for future reference.
- Keep this equipment away from humidity.
- If any of the following situations arises, get the equipment checked by a service technician.
- The equipment has been exposed to moisture.
- The equipment has been dropped and damaged.
- The equipment has obvious signs of breakage.
- The equipment has not been working well or you cannot get it work according to User`s Manual.
Copyright Statement
No part of this publication may be reproduced in any form by any means without
the prior written permission. Other trademarks or brand names mentioned
herein are trademarks or registered trademarks of their respective companies.
Disclaimer
Information in this document is subject to change without notice. The
manufacturer does not make any representations or warranties (implied or
otherwise) regarding the accuracy and completeness of this document and shall
in no event be liable for any loss of profit or any commercial damage,
including but not limited to special, incidental, consequential, or other
damage.
Introduction
USB 3.0 4-Ports Hub, compliant with USB 3.0 specification With this USB Hub you can easily connect up to 4 USB 3.0 devices to your computer, such as an MP3 player, digital camera, or printers. It is streamlined, sleek and has a compact design and is the perfect solution for your USB port expansion.
Features
- Compliant with USB 3.0 specification
- Bus-Powered / Self-powered (optional)
- Plug-and-Play
- 1 upstream and 4 downstream USB ports
Package Content
- USB 3.0 4-port Hub x1
- Power Adapter (optional) x1
- USB 3.0 Cable x1
- User Manual x1
System Requirements
- Desktop or notebook with USB port
- One of the following operating systems (no driver needed):
Windows XP, Windows Vista, and Windows 7
Installation Verification
After you connect this hub to a PC by an USB 3.0 cable, the system will detect
the device and install the required drivers automatically. After the
installation is finished, you can go to the Device Manager to verify the
entire installation.
Windows XP:
Windows Vista:
Windows 7:
Specification
| Ports | 1 upstream port and 4 downstream ports |
|---|---|
| Power Mode | Self-Powered: 5V 4A / 5V 2.5A (optional) |
| Bus-Powered: | Connect to an USB 3.0 host: 4 ports share 900 mA |
Connect to an USB 2.0 host: 4 ports share 500 mA
Specification is subject to be changed without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>