Skycolor T600 Wireless Presenter User Manual
- June 9, 2024
- Skycolor
Table of Contents
Skycolor T600 Wireless Presenter
Be sure to carefully read this user’s manual before using the wireless presenter and keep it for future use.
WARNING Declaration!
Laser beams can cause permanent damage to the eyes. Do not look into the laser
beam or shine the laser beam into your eyes, other peoples’ eyes, or the eyes
of pets. Be careful when pointing it towards reflective surfaces.
Keep this device away from Children. This is a working tool, not a toy. It
should only be used by adults.
Information in this document is subject to change without notice. No part of
this document may be reproduced or transmitted in any form or by any means,
electronical or mechanical, for any purpose, without prior permission of the
seller. The seller provides this document without warranty, or condition of
any kind. The seller may make improvements or changes in the product described
in this document at any time.
Introduction
Product Introduction
This product is an integrated multi-functional intelligent controller of laser pointer and wireless flip pen.
Features
-
Plug & play 2.4GHz wireless connection.
Offer secure and reliable performance through a compact USB receiver for the ultimate freedom and mobility during your presentation. -
Internal receiver storage
Convenient place to store your wireless USB receiver so it won’t get lost, as each presenter and receiver are uniquely paired to prevent interference.
Compatibility
- The presenter compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10, Mac OS, Linux, Android. On Mac OS, Linux, Android,it may only support laser and flip functions.
- The computer should have at least one available usb port, the presenter compatible with usb 1.0, usb 2.0 & usb 3.0 port.
Using your presenter
Connecting the appliance
- Power Switch ON/OFF
- USB receiver: Remove the USB receiver, plug the receiver into the computer’s USB interface, then the lower right corner of the computer dest top will display” found new hardware”, the system will automatically install the driver. When Windows displays”New hardware is installed and can be used” , it indicates that the receiver is installed.
Function Description
The product supports two operating modes: PowerPoint mode and music control mode. The two modes could be switched arbitrarily. Mode Switch: Press and hold the “Page Up” and “Tab” button to swith mode.
PowerPoint Mode
- Press “Page Down” button and “Page Up” button to go forward and backward.
- Press and hold “Laser Button” button to turn on the laser.
- Full screen: Press and hold the “Page Up” button to enter full screen, long press it again to exit full screen.
- Black screen: Press and hold the “Page Down” button to enter black screen, press any button to exit black screen.
- Link function: Under the Microsoft PowerPoint full screen, press the “Tab” button to choose Hyperlink, then press “Enter” button to open Hyperlink.
- Close window: Press and hold “Enter” button to achieve Alt + F4 to close the current window.
- Window switch: Press and hold “Tab” button to achieve All + Tab window switch function.
- Prezi/Keynote/PowerPoint mode switch: Press “Page Up” and “Page Down” to switch among Up & Down, Left & Right, PgUp & PgDn.
- Low power indication:The red LED on the wireless presenter will flash rapidly to remind the user to change battery timely.
- Volume control: Press and hold “Page Up” and “Laser Button” to increase the volume , Press and hold “Page Down” and “Laser Button” to decrease the volume .
Music Control Mode
- Press “Move Previous” button to skip to the previous in the music player software.
- Press “Move Next” button to skip to the next song in the music player software.
- Keep clicking “Volume Up” button to increase the volume.
- Keep clicking “Volume Down” button to decrease the volume.
- Press and hold the “Move Previous” button to enter Mute mode, long press it again to exit Mute mode.
- Press and hold the “Move Next” button to pause the music, long press it again to play the music.
Frequently Asked Questions
How to know the battery is out of power?
If the red LED on the wireless presenter starts to flash rapidly, it means the
power is low.
Why does the laser pointer not work?
Firstly you can check whether the wireless presenter is in low power or out of
power, make sure the switch is on. If all the other buttons can work, only the
laser pointer can not work, please contact the seller.
When the mini USB receiver plugs into the computer USB, the computer does
not detect the device, why?
Please check that the USB interface is wordking properly.,and try other USB
interface.if necessary, try other cumputers. You can insert other USB devices
in the USB port to check whether the USB interface is working properly.
The laser can work, the computer can detect USB receiver,but all other
function does not work. Why?
Please press down and hold the “Enter”and “Page Down” button for 3 seconds at
the same lime, then release, at this point, the blue LED will flash, please
plug the USB receiver into the computer USB, it can work once this is done.
Specifications
Transmitter
- Technology: 2.4GHz RF
- Control Distance: Up to 100 meter
- Laser: Class 3R
- Max Output: <5mW
- Laser Distance: >200m
- Battery: 300mAh
- Working Voltage: 3.7V
- Sleep Current: <10uA
- Dimension: 1282010.5mm
- Weight: 22g
- Wavelength: 650nm (Red Light) 532nm ( Green Light)
USB Receiver:
Working Voltage: 4.5-5.5V
Dimension: 22124.5mm
Weight: 2g
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>