SILVER MONKEY UT-600 TV Bracket User Manual
- June 9, 2024
- SILVER MONKEY
Table of Contents
SILVER MONKEY UT-600 TV Bracket User Manual
TOOLS
Instruction
NOTE: Adjust to the desired angle then tighten the screws using the Philips Screwdriver as shown, alternating from each screw as tighten them.
Carefully read these instructions before using the product. Keep it for future reference.
Safety information
- Adjust the mount with the installed device only.
- Make sure that the weight of the device does not exceed the weight defined in the specification.
- Check that the screws are tightly fastened.
- The wall must be able to sustain the device on the bracket according to its allowable load.
- Proper tools and at least two people are required for safe installation.
- Mounting requires extreme caution. If the bracket with the device falls, it can cause injury, permanent damage to health or even death.
- Keep the device out of the reach of children. They may swallow some parts.
- Use the device only in accordance with the operating instructions.
- If the device stops working properly – contact us.
Specification
TV Wall Mount
TV size| 23” – 55
VESA compatibility| 100×100, 100×200, 200×100, 200×200, 300×200, 400×200,
300×300, 400×300, 400×400
Maximum load| 30 kg
Rotation range| +90°~-90°
Distance from the wall| 60 – 382 mm
Warranty and technical support
Your product is covered by a 24-month manufacturer’s warranty. For more information go to www.silvermonkey.com/support. If you have questions about using the product – contact us at [email protected]. Manufacturer: Silver Monkey sp. z o.o., ul. Twarda 18, 00-105 Warszawa, Poland.