ebemate U1 Plus Smart Baby Monitor User Manual
- June 9, 2024
- ebemate
Table of Contents
- U1 Plus Smart Baby Monitor
- Safety Instructions
- Baby’s Guardian
- Multifunctional Base Floor Stand
- Placement
- Product In
- Wall Support Set up
- Quick Start
- Specifications
- Product Warnings
- Network & Operating System Requirements
- Connect App
- Customer Service
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
U1 Plus Smart Baby Monitor
User Manual
U1 Plus Smart Baby Monitor
Smart Baby Monitor sty)
Keeping your precious little ones safe and protected
Download App
https://fileusa.ebemate.com/SouthSun/downloadEbemateHomeApp
Safety Instructions
WARNING:
-
CHOKING HAZARD-This product contains small parts which may cause choking.
-
SHOCK WARNING-To prevent electric shock, NEVER use the camera near water, including near o bathtub, sink, laundry tub, wet basement, etc.
-
Use only the DC adapters provided.
-
Adult assembly is required. Keep small parts away from children when you are assembling.
-
This product is not a toy. Do not allow children to play with it.
-
This product is NOT intended to replace proper adult supervision of children.
You MUST check your child’s activity regularly, as this product will not alert parents to silent activities of a child. -
Before using this product, read and follow all instructions and warnings contained in this booklet.
-
Do not allow water damage to the camera unit, power adapter, or charging cable which cause overheating of the charging components.
-
Do not use unofficial third party charging cables to charge the device. This may result in overheating of the charging port. Only use the chorging cables provided in the box.
-
Do not use unofficial third party power adapters, especially high wattage adapters. This may result in overheating of the cable and/or charging port. Only use the adapter provided in the box.
FCC Statements
These devices, including Baby Camera , comply with Part 15 of the FCC
rules. Operation is subject to the following two conditions:
These devices may not cause harmful interference. These devices must accept
any interference received, including interference that moy cause undesired
operation. Class B Digital Device. These equipments have been tested and
found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. These
equipments generate, use, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, moy cause harmful
interference to radio communications, However there is no guarantee that
interference will not occur in a particular installation. If these equipments
do not cause harmful interference to radio or television reception, which can
be determined by turning the equipments off and on, the user is encouraged to
try to correct the interface by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult an experienced radio / TV technician for help.
Caution to the user. The Federal Communications Commission warns the users
that changes or modifications of the unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipments.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Baby’s Guardian
Face Detection
Bella will alert you if your baby’s face is not visible or rolls over in the
crib.| Danger Zone
Bella will alert you if your baby is approaching hazardous area you previously
set.
Safe Zone
Bella will alert you if your baby leaves a predefined ‘Safe Zone’| Cry
Detection
Bella will alert you if your baby cries
Multifunctional Base Floor Stand
Multifunctional Base
Can be easily attached to almost any crib or to your buggy / stroller
Floor Stand
Place near the center of the crib.
Slide the base of the Bella device all the way into the holder on top of the
Floor Stand until it stays firm.
Placement
Movement Tracking
Bella will alert you if there’s any object movement| OR CODE
Leon lice to use &l remixtures
https://fileusa.ebemate.com/SouthSun/U1Tutorial
Sound Detection
Bella will alert you if there’s any loud noises near your baby| Human
Detection
Bella will alert you as soon as someone enters the same space as your baby
Product In
Wall Support Set up
- Screw off the base plate of the camera.
- Rotate the base plate for 180° and screw it on again.
Quick Start
1.Check network frequency
Please note that Bella only supports 2.4G Wi-Fi (it doesn’t currently support
5G Wi-Fi)| 2. Check phone version
Please note that the App will only run on Android 5.0 & above or iOS 10.0 &
above
Specifications
Input Voltage: | 5V | Operating Power: | <1.5A |
---|---|---|---|
Night Vision: | YES | Picture Sensor: | ov2735 |
Built-Len: | EFL4.21 F2.8 | Operating Temerature: | 0-40 C |
Power Adapter: | 5V/2A | Charging Cable: | 4.5m |
Exposure Control: | Auto | White Balance Control: | Auto |
Vertical Turning Angle: | 355° | Horizontal Turnning Angle: | 11W |
Product Weight: | 483g | Dimensions(LxWxH): | 295.335×551(in) |
Product Warnings
- Please keep this product and any associated small parts out the reach of children
- Please do not use unofficial 3rd party power adaptors which may present a fire risk
- Please keep the product dry at all times to prevent malfunction or safety issues
- Note that eremite handle the protection of data security seriously and your privacy is of utmost importance to us. For more information, please visit www.ebemate.com.
Network & Operating System Requirements
| Blue Light = Normal work
---|---
| Red Light (flashing) = Out of network range
| Night Light will turn on during initial start up
3. Download App
Scan QR code to download App
https://fileusa.ebemate.com/SouthSun/downloadEbemateHomeApp| 4. Start Bella
Press and hold power button until Nightlight illuminates
Connect App
1.Download & Register
Download the App and follow the onscreen instructions to complete your
initial registration| 2.Pair Device
Tap ‘Pair Device’ to pair your phone with your new smart baby monitor| 3.
Ready to begin
Now start your journey with
Bella!
---|---|---
WARNING
- For safety reasons, please DO NOT place the baby monitor close to or directly above the baby’s head.
- To gain the best observance and detection, it is highly recommended to place the baby monitor and the floor stand near the center of the crib.
- ALWAYS check the baby monitor is attached or mounted firmly and does not wobble with any movement.
Thank you for supporting us and purchasing our Smart Baby Monitor Bella!
We feel proud and honored to become your ultimate parenting assistant.
Customer Service
Warranty Information
Product Name | Item | Warranty |
---|---|---|
Bella Smart Baby Monitor | Camera | 12 months |
Power Adapter
Please note that the above warranty does not cover the following:
- Wear and tear through normal product usage
- Accidental damage caused by product misuse
- The warranty will also be deemed void if any product parts are replaced by non-approved personnel
Support Information
Should you have any questions, please feel free to contact us via our
official email address:
hello@ebemate.com
www.ebemate.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>