Duoenlaite Shenzhen Technology Skull w Sunglasses Skull Bluetooth Stereo Speaker User Manual

Sunglasses Skull Bluetooth Stereo Speaker

User Manual

Thank you very much for purchasing our Bluetooth Skull Speaker. Please read this manual before using, understanding this product will make it much easier to use.

Product specifications

• Model: Skull w Sunglasses
• Type: Skull Bluetooth stereo
• Connection mode: Bluetooth connectivity, 3.5 MM audio jack, TF, USB
• Signal to noise ratio: 75 db or higher
• Power supply: built-in lithium battery
• Frequency: 60 hz to 15 KHZ
• Battery capacity:1200 am
• Play time: 5-10 hours
• Speaker specifications: 5.7 cm, 8 w
• Distortion rate: 1% or less
• Product size: 10 10 13 cm
• Net weight: 0.6 kg

Packing includes:

• 1-speaker,
• 1-3.5 auxiliary cord,
• 1-USB power cord,
• User manual

Bluetooth stereo button layout

After pressing the power button, you will hear the evil laugh start up and tooth lights flashing at the same time. After startup, Bluetooth searches automatically, the Bluetooth indicator light will flash. Now pair the device to your phone, name should appear as “Skull” but may differ depending on device. After successfully pairing to the speaker, Bluetooth indicator light will flash, sound will prompt. This machine has a memory function, after the Bluetooth connection has been set up the Bluetooth will connect automatically when the speaker is powered on. If Bluetooth connection fails, please shutdown and restart, also may be because the battery power is insufficient, please recharge.

Tooth Buttons

The front teeth of this model are buttons, they can be used for either skipping songs or adjusting volume.

Changing song: To change songs simply tap the buttons, + goes forward through your playlist and – goes to the previous song or restarts the current song.

Adjusting volume: To adjust volume you simply hold down the + or – teeth and the volume will start to go up or down. We recommend having the skull at max volume and then adjusting volume using your music device. To turn the skull to max volume simply hold down the + tooth until you hear a tone.

Attaching strap

There is an indent in the top of the skull with a cap in it. If you remove this cap there is a bar where the lanyard can be tied to the skull and hung from wherever you please

M function button

The button on the back labeled “M” is the function button. This is used for switching from Bluetooth to Aux to memory card to USB. This button is also used for pairing 2 skulls. (See Pairing 2 skulls)

Pairing 2 skulls for stereo function

These skulls are equipped with dual pairing abilities so 2 can be paired for simultaneous playback. To pair 2 skulls, power on both devices at same time. Then hold the M function on one skull until they both make a pairing noise. No other devices can be paired during this step.

Charging

To charge the device, power off and plug the charger into the wall outlet. Place the device on the charger and allow it to sit for a minimum of 1 hour. Do not charge for more than 12 hours as this can damage the battery.

Warm prompt

1. In order to prolong the service life of the machine and protect your physical and mental health, please don’t listen to music loudly for extended periods of time, so you do not damage your hearing.
2. If the machine malfunctions, please immediately shut off the power switch and unplug the USB cord to prevent damage of the speaker and other components.
3. Electricity shortages affect Bluetooth distance or cause Bluetooth to disconnect, please recharge in time.

Matters needing attention

1. Please store and use in normal temperature environments.
2. Please do not expose the product to direct sun, rain or damp environments.
3. Please do not throw or cause product damage.
4. Built-in lithium battery products, please do not discard in normal trash or set on fire, this will cause danger.
5. Please do not alter the product itself.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is
  connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>