AgriCameras com Agri Cam 2 to 4 Camera System with Built In Battery and Magnet and 7 LCD Instruction Manual

June 13, 2024
AgriCameras com

AgriCameras com Agri Cam 2 to 4 Camera System with Built In Battery and Magnet and 7 LCD

AgriCameras com Agri Cam 2 to 4 Camera System with Built In Battery and
Magnet and 7 LCD

Instructions for use

Instructions for use

Description

2.4G Wireless with more than 100M long wireless transmission distance in open area between the monitor and camera Wireless 7 inch AHD monitor adopts the original IPS 16:9 widescreen full-angle glass screen, 1024*600 resolution. The monitor can shut off without signal automatically, the standby current is 10MA, can start up in seconds with signal. Built-in 6400mA rechargeable battery, powerful magnet adsorption installation camera that supports HD 940 infrared night vision, IP69 waterproof rating, up to 140°horizontal angle. This wireless camera is operational when charging.

Description

WIRELESS Backup Camera with Built-in Battery and Magnet

Resolution 720P 1280720 pixels
Image Sensor CMOS 1/2.7″
Viewing Angle 140 degree
2.4G Transmission Distance 200M in open area
System N/P Automatically
Spread Spectrum S(Adaptive frequency hopping)
Transmission Bandwidth Battery 8MHz BER<1E-3 6400mA
Capacity Battery 6400mA
Indicator support 4 LED lights
Battery Charging Time DC5.5,5~24Volts,6hours
Frequency 2400-2483.5MHZ
Working Time with Fully Charged 18 hours(under continuous working conditions)
Standby Time with Fully Charged 580 hours(on power saving mode)
Camera Adjustable Angle 0-140 degree
Frequency 2400-2483.5MHZ
ON/OFF Mode Long press to ON/OFF, short press to show battery status
Installation Mode Magnet base adsorption installation
Night Vision Infrared HD night vision
SNR 46.5dB
Audio without(customized)
Waterproof level IP67
Transmitting sensitivity -89 dBm
Material Black aluminum alloy
Shockproof Level 4G
Power supply DC5-24V
Operation Temperature – 20℃ ~ 70℃, RH95%MAX
Storage Temperature –30℃ ~ 85℃, RH95%MAX
Dimensions 74
45.5*56.5mm
Attachments DC5.5 male power cable、5DB antenna

7 inch AHD 720P 2.4G Digital Wireless Vehicle Monitor

7 inch AHD 720P 2.4G Digital Wireless Vehicle Monitor

Screen ratio 16:9 IPS Panel
Resolution 1024R.G.B600
Back light LED, 500 cd/m2
Viewing angle L(85) R(85) Ver. UP(85) DOWN(85)
Working temperature -20~+70℃
Working humidity 85%RH
Storage temperature -30~+85℃
Power supply DC 9-30V
Delay time 120mS
Electric current TYPE:300mA, Max.380mA
Power consumption <5W
AV input 4 channel 2.4G wireless video signal input
Trigger 1 trigger control, with parking guide line
Operating frequency range 2400 ~ 2483.5MHz
System PAL/NTSC automatically
Transmission bandwidth 3Mbps
Receive sensitivity -88dBm@4MHZ
Spread spectrum mode Frequency hopping
2.4G wireless transmission distance 200M in open area Shockproof level 4G
Power cable 5.5 DC female connector
Weight 0.54KGS
Size 180mm121mm24mm

Attention

For your safety, do not watch video or set monitor while driving.
Non-professional please do not disassemble the product at will, please consult the after-sales service organization when the product malfunctions, or send it to the local maintenance department for inspection and repair.

Warning

When installing this product, please install it in the position permitted by laws and regulations, and we shall not be responsible for the liability caused by the illegal installation of the product.

Tips

In cold weather, the product may appear dark screen phenomenon when startup. Which will heat up slowly and return to normal with the increase of temperature.

Product Introduction

  1. 4G antenna
  2. 7″ IPS screen
  3. LOGO
  4. Brightness decrease: reduce the brightness value of the display screen
  5. MENU: open or exit the menu
  6. Brightness increase: increase the brightness value of the display screen
  7. Power key
  8. Flip set: Turn Up/Down/Left /Right
  9. Parking guide line ON/OFF
  10. Pairing button

Camera Introduction

  1. 4G antenna
  2. Night vision infrared light
  3. Night vision sensor
  4. U-shaped bracket and sun shade

Wireless Camera Built-in Battery

  1. 2.4G antenna
  2. Night vision infrared light
  3. Angle adjusting knob
  4. Light induction (night vision switching automatically)
  5. Power indicator
  6. Power On/OFF
  7. Battery
  8. Charging input

Specifications

One to one wireless kit
One to one wireless
Quad wireless kit kit with camera built-in battery
Screen ratio 16:9 IPS panel
Resolution 1024R.G.B600
Back light LED 500 cd/m2
Viewing angle L(85°) R(85°) U(85°) D(85
Power supply C 12-24V DC 9-36V
Power consumption <3W <5W
AV input:
1 channel AHD wireless video signal input
4 channel AHD wireless video signal input 1 channel AHD wireless video signal input

System P/N automatically
Shockproof level 4G
Working temperature
Storage temperature
Size
Camera
Sensor CMOS 1/2.7″
Resolution 720P or 1080P
System N/P automatically
Transmission distance 200M in open area
--- ---
Waterproof level 1P69K
Power supply DC12-24V
Viewing angle 140° degrees
Battery capacity
Battery indicator
Night vision Infrared HD night vision
Working temperature -20°C~ +70°C
Storage temperature -30°C~ +85°C
Size 7445.556.5 mm
Camera Quality 1 PCS     4PCS
Key

Menu Setting

Press the “MENU” key on the panel to set the “CONTRAST” “SATURATION” and “BRIGHTNESS”, Press”- “and”” to increase or decrease the specific value. as shown in picture Below:

Flip Setting

Press * to turnover the image, up, down, left and right flip available. Parking Guide Line
Press “
, set it ON/OFF, picture below:

Camera Pairing (One to one wireless kit)

Long press the power button on the panel to enter the pairing state (the state lasts for 10S) and displays “pairing” (as shown in the figure below). In the pairing state, turn off power for the camera and then re-power it, if it shows “Successfully Pairing”, means the pairing is OK, and if shows “Pairing Failure”, then it will need to be repaired.

Camera Pairing (Quad wireless kit)

long press power button single-channel state, enter the willing stale (the state lasts for 10S) and display pairing° (as shown In the figure below: In the pairing state, turn off power for the camera and then re power it shows “Successfully Pairing”: means the signal is OK, and it shows “Pairing Failure”, then will heed to repair it.

Connection Introduction

7 Inch AHD Wireless Monitor Connection Diagram
Option 1 (Powered by power cord)

Connection Introduction 

Option 2 (Powered by car charger, only for one to one wireless kit with camera built-in battery)

Connection Introduction 

Accessories Included

  • Car Charger Power Cable

  • Fan-shaped Mount

  • Hexagon wrench

  • 2.4G antenna×2PCS
    Accessories Included

  • Direct Source Power Cables
    Accessories Included

  • Suction Bracket
    (Optional)

  • Home Charger Adapter
    (Optional)

  • 2.4G Antenna Extension Cord
    (Optional)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals