ASUS VA24EHE HD LCD Monitor User Guide
- June 9, 2024
- Asus
Table of Contents
- ASUS VA24EHE HD LCD Monitor
- Notices
- Safety information
- Care & Cleaning
- Welcome
- Package contents
- Assembling the monitor
- Connect cables
- Installation
- Six sides figure
- Monitor introduction
- OSD (On-Screen Display) menu
- Specifications
- Troubleshooting (FAQ)
- Supported Timing List
- SD/HD Timings (HDMI input only)
- FAQ’s
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ASUS VA24EHE HD LCD Monitor
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the floor/wall in accordance with the installation instructions
Safety information
- Before setting up the monitor, carefully read all the documentation that came with the package.
- To prevent fire or shock hazards, never expose the monitor to rain or your retailer.
- Never try to open the monitor The dangerous high voltages inside the monitor may result in serious physical injury.
- If the power supply is broken, do not try to fix it by Contacting a qualified service technician or your retailer.
- Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
- Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these Never place this product near or over a radiator or heat source unless proper ventilation is provided.
- The monitor should be operated only from the type of power source indicated on the If you are not sure of the type of power supply to your home, consult your dealer or local power company.
- Use the appropriate power plug which complies with your local power
- Do not overload power strips and extensions Overloading can result in fire or electric shock.
- Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become Place the monitor on a stable surface.
- Unplug the unit during a lightning storm or if it will not be used for a long period of This will protect the monitor from damage due to power surges.
- Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
- To ensure satisfactory operation, use the monitor only with UL-listed computers that have appropriate configured receptacles marked between 100 ~ and 240V AC.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.
- Provide an earthing connection before the mains plug is connected to the And, when disconnecting the earthing connection, be sure to disconnect after pulling out the mains plug from the mains.
WARNING
Usage of other than the specified head- or earphones can result in hearing loss due to excessive sound pressure.
Care & Cleaning
- Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord.
- Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with a mild cleaner.
- Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray the cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
- The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
- You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
- When the same image is displayed for hours, an afterimage of the previous screen may remain after switching The screen will recover slowly or you can turn off the Power Switch for hours.
- When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
-
ASUS websites
The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com -
Optional documentation
Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
Welcome
Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings you!
Package contents
Check your package for the following items:
- LCD Monitor
- Monitor Base
- Monitor Column (For VA24EHE only)
- Quick Start Guide
- Warranty Card
- Power Cord
- HDMI Cable (optional)
- VGA Cable (optional)
- DVI Cable (optional)
- Audio Cable (optional)
- USB Cable (optional)
- Mini PC Kit (optional)
If any of the above items are damaged or missing, contact your retailer immediately. Also, the Replaceable parts are required by the TCO Certified.
Assembling the monitor
To assemble the monitor:
- Place the display flat on a cloth on the table, Then attach the base to the arm and fix it with the screw to join them tightly. You can easily tighten the screw with your fingers.
- Adjust the monitor to the angle that is most comfortable for you.
VA24EHE:
VA24EHLB/VA24EHEL/VA24EHL:
Connect cables
The rear of the LCD monitor VA24EHE:
- AC-IN Port
- HDMI Port
- DVI Port
- VGA Port
- Kensington Lock
VA24EHLB/VA24EHEL/VA24EHL:
- AC-IN Port
- HDMI Port
- DVI Port
- VGA Port
- Audio in
- Audio out
- USB Type-B 2.0 Port
- USB 2.0 Port
- USB 2.0 Port
- Kensington Lock
Installation
- Turn off your computer and unplug your computer’s power cord.
- Connect the signal cable to the HDMI (optional) and /or VGA (optional) and /or DVI (optional) input socket of the monitor, and the HDMI (optional) and /or VGA (optional) and /or DVI (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector.
- Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with the audio cable.
- Insert the monitor power cable into the power port at the back of the monitor.
- Plug the power cords of your computer and your monitor into a nearby electrical outlet.
VA24EHE:
VA24EHLB/VA24EHEL/VA24EHL:
- POWER CORD specifications refer to page v.
- For the installation of replaceable parts, please refer to the above installation instructions.
- Users may go to the local service network to replace /purchase qualified replaceable parts.
- For local service centers and service contacts, please refer to https://www.asus.com/support
Six sides figure
ASUS VA24E Series UNIT:mm(inch)
VA24EHE:
VA24EHLB/VA24EHEL/VA24EHL:
Monitor introduction
Using the Controls button
Use the control button on the back of the monitor to adjust the image settings.
- Menu Button / Close:
- Press this Button to enter the OSD menu.
- Exit the OSD menu.
- Return to the previous menu.
- Key Locked Hotkey(*Note1)
- Close / Return Button:
- Exit the OSD menu.
- Enter/select the icon (function) highlighted while the OSD is activated.
- Input source hotkey/Increase value:
- Add or Increase the value
- Input source hotkey
- Brightness hotkey/Decrease value:
- Next Item or Decreased value
- Brightness hotkey
- Power Button:
- Power on/off monitor when the monitor is powered off/on.
Detaching the arm/stand (for VESA wall mount)
The detachable stand of this monitor is specially designed for VESA wall mount.
To detach the arm/stand
- Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table.
- Remove the base/stand from the monitor.
- We recommend that you cover the table surface with a soft cloth to prevent damage to the monitor.
- The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
- Use only the UL Listed Wall Mount Bracket with a minimum weight/load of 12 kg (Screw size: M4 x 10 mm).
Adjusting the monitor
- For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.
- Hold the stand to prevent the monitor from falling when you change its angle.
- You can adjust the monitor’s angle from +23˚ to -5˚/+33˚ to -5˚
It is normal that the monitor slightly shakes while you adjust the viewing angle.
OSD (On-Screen Display) menu
How to reconfigure
- Press the MENU button to activate the OSD menu.
- Press the DOWN and UP buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.
- To select the highlighted item on the menu press the Center key.
- Press the DOWN and UP buttons to select the desired parameter.
- Press the Center key to enter the slide bar and then use the DOWN or UP buttons, according to the indicators on the menu, to make your changes.
OSD Function Introduction
Splendid
This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.
- Standard Mode: This is the best choice for document editing with SPLENDID™ Video Intelligence Technology.
- sRGB Mode: This is the best choice for viewing photos and graphics from PCs.
- Scenery Mode: This is the best choice for scenery photo displaying with SPLENDID™ Video Intelligence Technology.
- Theater Mode: This is the best choice for movie watching with SPLENDID™ Video Intelligence Technology.
- Game Mode: This is the best choice for game playing with SPLENDID™ Video Intelligence Technology.
- Night View Mode: This is the best choice for playing dark-scene games or watching a dark-scene movie with SPLENDID™ Video Intelligence Technology.
- Reading Mode: This is the best choice for book reading.
- Darkroom Mode: This is the best choice for a weak ambient light environmen.
- In the Standard Mode, the Saturation, skin tone, Sharpness, and ASCR functions are not user-configurable.
- In the sRGB, the Saturation, Color Temp., skin tone, Sharpness, Brightness, Contrast, and ASCR functions are not user-configurable.
- In the Reading Mode, the Saturation, SkinTone, ASCR, contrast, and Color Temp functions are not user-configurable.
Blue Light Filter
Adjust the energy level of blue light emitted from the LED backlight.
- Level 0: No change.
- Level 1~4: The higher the level, the more blue light will be reduced.
- When Blue Light Filter is activated, the default settings of Standard Mode will be automatically imported.
- Between Level 1 to Level 3, the Brightness function is user-configurable.
- Level 4 is an optimized setting. It is in compliance with TUV Low Blue Light Certification. The Brightness function is not user-configurable.
Please refer to the following to alleviate eye strains:
- Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break.
- To minimize eye strain and dryness in your eyes, users should rest their eyes periodically by focusing on objects that are far away.
- Eye exercises can help to reduce eye strain. Repeat these exercises often. If eye strain continues please consult a physician. Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonally.
- High-energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue light filter to reduce 70% (max.) harmful blue light to avoid CVS (Computer Vision Syndrome).
Color
Select the image color you like from this function.
- Brightness: The adjusting range is from 0 to 100.
- Contrast: The adjusting range is from 0 to 100.
- Saturation: The adjusting range is from 0 to 100.
- Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode.
- Skin Tone: Contains three color modes including Reddish, Natural, and Yellowish.
- In the User Mode, the colors R (Red), G (Green), and B (Blue) are user-configurable; the adjusting range is from 0 ~ to 100.
Image
You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, ASCR, Position (VGA only), Focus (VGA only), and Auto Adjust (VGA only), from this main function.
- Sharpness: Adjusts the picture’s sharpness. The adjusting range is from 0 to 100.
- Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.
- Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”.
- VividPixel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100.
- ASCR: Select ON or OFF to enable or disable the dynamic contrast ratio function.
- Adaptive-Sync: It can allow an Adaptive-Sync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power-efficient, virtually stutter-free, and low-latency display updates.
- Position: Adjusts the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100 (Only available for VGA input).
- Focus: Reduces Horizontal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100 (Only available for VGA input).
- Auto Adjust.: Automatically adjust the image to its optimized position, clock, and phase. (Only available for VGA input.)
- 4:3 is only available when the input source is in 4:3 format. OverScan is only available for the HDMI input source
- Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.
- The clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.
Sound (VA24EHL/VA24EHL only)
Adjust the sound settings to your preference.
- Volume: Adjusts the output volume level.
- Mute: Mute the output volume.
- Source: Adjusts audio source to “Line In” or “HDMI” (only available for HDMI input); Adjusts audio source to “Line In” or “DisplayPort” (only available for DisplayPort input).
Input Select
Select the input source from VGA, HDMI, and DVI input signal.
System Setup
Adjusts the system configuration.
- Splendid Demo Mode: Activate the demo mode for the Splendid function.
- GamePlus: The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, the Aimpoint function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games. To active GamePlus:
- Select ON to enter the GamePlus main menu.
- Press LEFT and RIGHT to select between Crosshair, Timer, FPS Counter, Display Alignment, Snellen Chart, Amslter Grid, and Astigmatism function.
- Press the Center key to confirm the function you choose. Press LEFT to go back. Press to go off, and exit.
- QuickFit: contains three patterns: (1) Grid (2) Paper size (3) Photo size.
1. **Grid pattern:** Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel.![ASUS-VA24EHE-HD-LCD-Monitor-FIG-21](https://manuals.plus/wp-content/uploads/2023/03/ASUS-VA24EHE-HD-LCD-Monitor-FIG-21.png)
2. **Paper size:** Provides users to view their documents in real size on the screen.![ASUS-VA24EHE-HD-LCD-Monitor-FIG-22](https://manuals.plus/wp-content/uploads/2023/03/ASUS-VA24EHE-HD-LCD-Monitor-FIG-22.png)
3. **Photo size:** Provides photographers and other users to accurately view and edit their photos in real size on the screen.![ASUS-VA24EHE-HD-LCD-Monitor-FIG-23](https://manuals.plus/wp-content/uploads/2023/03/ASUS-VA24EHE-HD-LCD-Monitor-FIG-23.png)
- ECO Mode: Activate the ecology mode for power saving.
- USB Charging: Turn On/Off the USB charging function during the standby mode. (VA24EHLB only)
- OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen.
- Language: Select OSD language. The selections are: English, French, German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croatia, Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai, and Indonesian.
- More: Return to the next page of System Setting.
- Key Lock: Disable all key functions. Pressing the second button on the right for more than five seconds to disable the key lock function.
- Back: Return to the previous page of System Setting.
- Information: Displays the monitor information.
- Power Indicator: Turn the power LED indicator on/off.
- Power Key Lock: To disable/enable the power key
- All Reset: Selects “Yes” to revert all settings to the factory default mode.
Specifications
Model | VA24EHE | VA24EHEL |
---|---|---|
Panel Size | 23.8”W | |
Max. Resolution | 1920×1080 | |
Brightness (Typ.) | 250cd/m2 |
Intrinsic Contrast Ratio
(Typ.)
| 1000:1
Viewing Angle (CR>10)| 178°(V) /178°(H)
Display Colors| 16.7 M(6bit+FRC)
Response Time| 5ms (G To G )
Satellite Speaker| No
Sound from HDMI| Yes
HDMI input| Yes
D-Sub input| Yes
DVI input| Yes
Audio Line-in| No
Power ON Consumption| < 13.2W
Note| *Based on Energy Star 8.0 standard
Chassis Colors| Black
Power saving mode| < 0.5W
Power off mode| < 0.5W
Tilt| -5° ~ +23°| -5° ~ +33°
VESA Wall Mounting| Yes (100mm x 100mm)
Phys. Dimension with stand (WxHxD)
| ****
540.45mm x 403.67mm x 203.94mm
| ****
540.45mm x 482.33mm x
226.24mm
Phys. Dimension without stand (WxHxD)
(For VESA Wall Mount)
| 540.45mm x 324.67mm x
44.4mm
| 540.45mm x 324.67mm x
44.4mm
Box Dimension (WxHxD)| 559mm x 415mm x 127mm| 647mm x 400mm x
181mm
Net Weight (Esti.)| 3.6 kg| 5.69 kg
Gross Weight (Esti.)| 5.5 kg| 8.1 kg
Voltage Rating| AC 100~240V(Built-in)| AC 100~240V(Built-in)
Model| VA24EHLB/VA24EHL
---|---
Panel Size| 23.8”W
Max. Resolution| 1920×1080
Brightness (Typ.)| 250cd/m2
Intrinsic Contrast Ratio
(Typ.)
| 1000:1
Viewing Angle (CR>10)| 178°(V) /178°(H)
Display Colors| 16.7 M(6bit+FRC)
Response Time| 5ms (G To G )
Satellite Speaker| Yes
Sound from HDMI| Yes
HDMI input| Yes
D-Sub input| Yes
DVI input| Yes
Audio Line-in| Yes
Power ON Consumption| < 14.5W
Note| *Based on Energy Star 8.0 standard
Chassis Colors| Black
Power saving mode| < 0.5W
Power off mode| < 0.5W
Tilt| -5° ~ +33°
VESA Wall Mounting| Yes (100mm x 100mm)
Phys. Dimension with stand (WxHxD)
| ****
540.45mm x 482.33mm x 226.24mm
Phys. Dimension without stand (WxHxD)
(For VESA Wall Mount)
| ****
540.45mm x 324.67mm x 44.4mm
Box Dimension (WxHxD)| 647mm x 400mm x 181mm
Net Weight (Esti.)| 5.69 kg
Gross Weight (Esti.)| 8.1 kg
Voltage Rating| AC 100~240V(Built-in)
Troubleshooting (FAQ)
Problem | Possible Solution |
---|---|
The power LED is not ON | • Press the button to check if the monitor is in |
the ON mode.
• Check if the power cord is properly connected to the monitor and the power outlet.
• Check the Power Indicator function in the main menu OSD.
Select “ON” to turn on the power LED.
The power LED lights amber and there is no screen image| • Check if the monitor and the computer are in the ON mode.
• Make sure the signal cable has properly connected to the monitor and the computer.
• Inspect the signal cable and make sure none of the pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly working.
The screen image is too light or dark| • Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave pattern is present in the image| • Make sure the signal cable is properly connected to the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
The screen image has color defects (white does not look white)| • Inspect the signal cable and make sure that none of the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color Temperature via OSD.
No sound or sound is low (VA24EHLB/VA24EHL only)| • Make sure the audio cable is properly connected to
the monitor.
• Adjust the volume settings of both your monitor and computer.
• Make sure the computer sound card driver is
properly installed and activated.
• Make sure the audio source is correct on the OSD.
Supported Timing List
Resolution | Refresh Rate | Horizontal Frequency |
---|---|---|
640×480 | 60Hz | 31.469kHz |
640×480 | 72Hz | 37.861kHz |
640×480 | 75Hz | 37.5kHz |
PC-Supported Primary Timing
Resolution | Refresh Rate | Horizontal Frequency |
---|---|---|
640×350 | 70Hz | 31.469kHz |
720×400 | 70Hz | 31.469kHz |
IBM Modes, Factory Preset Timing
Resolution | Refresh Rate | Horizontal Frequency |
---|---|---|
640×480 | 67Hz | 35kHz |
832×624 | 75Hz | 49.725kHz |
VESA Modes, User Available Timing
Resolution | Refresh Rate | Horizontal Frequency |
---|---|---|
848×480 | 60Hz | 31.02kHz |
1280×720(RB) | 60Hz | 44.444kHz |
1280×720 | 60Hz | 44.772kHz |
1280×720 | 75Hz | 56.456kHz |
1280×768(RB) | 60Hz | 47.396kHz |
1280×800(RB) | 60Hz | 49.306kHz |
1280×800 | 60Hz | 49.702kHz |
1280×800 | 75Hz | 62.795kHz |
1366×768 | 60Hz | 47.712kHz |
1440×900(RB) | 60Hz | 55.469kHz |
1440×900 | 75Hz | 70.635kHz |
1680×1050(RB) | 60Hz | 64.674kHz |
1920×1080 | 60Hz | 66.587kHz |
SD/HD Timings (HDMI input only)
HDMI 1.3, CEA-861B Formats, SD/HD Supported Primary Timings of (HDMI input only)
Resolution | Refresh Rate | Horizontal Frequency |
---|---|---|
640x480P | 59.94 / 60Hz | 31.469 / 31.5kHz |
720x480P | 59.94 / 60Hz | 31.469 / 31.5kHz |
720x576P | 50Hz | 31.25kHz |
1280x720P | 50Hz | 37.5kHz |
1280x720P | 59.94 / 60Hz | 44.955 /45kHz |
1920x1080i | 50Hz | 28.125kHz |
1920x1080i | 59.94 / 60Hz | 33.716 / 33.75kHz |
HDMI 1.3, CEA-861B Formats, SD/HD Supported Optional Timings of (HDMI input only)
Resolution | Refresh Rate | Horizontal Frequency |
---|---|---|
1440x480P | 59.94 / 60Hz | 31.469 / 31.5kHz |
1440x576P | 50Hz | 31.25kHz |
1920x1080P | 50Hz | 56.25kHz |
1920x1080P | 59.94 / 60Hz | 67.433 / 67.5kHz |
The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables.
FAQ’s
What place is the audio jack? I switched the display, but I was unable to locate it. I can only see the VGA, HDMI, power, and one other connector. not an audio jack!
The display has speakers, however, they don’t have a lot of loudness. It should work if you connect via HDMI (which transmits both video and sound) and then set your computer to use HDMI sound output. However, the volume is not great.
Does it function on a MacBook?
You’ll need a USB-C to HDMI cable, assuming you’re inquiring about the most recent models of the MacBook Air or MacBook Pro. You would be wise to take into account an adapter that offers a USB-C connector, an HDMI port, and both USB-A and USB-C.
Is HDMI 2.0 being used here?
HDMI is 3.0 compliant and supports 24Hz-75Hz refresh rates.
That’s deceptive; the headlining claims a 25″ generic monitor with a resolution of 2560 x 1440, but why?
First of all, I’m not sure if you are purchasing the same item I did because the headline for my transaction is 23.8″ rather than 25″.
This monitor is polarised, right? I recently purchased a vertically polarised monitor, therefore when I put on my polarised glasses I am unable to see the screen!
I’ve only tried it with polarised eyewear. You can see the display when the monitor is in landscape position, but if you mount it on a desk and turn it to portrait mode, you might have trouble seeing the display with polarised lenses.
The ASUS TUF VA24EHE speakers are functional.
Internal Speakers with Adjustable Height, Pivoting, Blue Light Filtering, Swiveling, Frameless, Tilting, and Flicker-Free Features include frameless, tilt, swivel, pivot, blue light filter, and flicker-free.
What is the refresh rate of the ASUS VA24EHE?
TUF Gaming VA24EHE is a 23.8-inch, Full HD (19201080), IPS display with a rapid 144Hz refresh rate for competitive gamers and fast-paced games.
Is the ASUS TUF display reliable?
Although it doesn’t have a very innovative design, its durability more than makes up for it. The display can play modern video games at their highest settings as long as your PC can keep up. It can deliver seamless gaming at a refresh rate of 165Hz even at lower graphic settings.
The VA24EHE is a premium display, right?
For gamers seeking a brilliant IPS screen that supports 144Hz refresh rates, the Asus VA24EHE is a wonderful price. It obtained an accuracy score often reserved for prosumer devices due to its low cost and superb image quality.
VA24EHEHDR technology is present?
Also supported are HDR and a wide color range.
Does the ASUS display pose a threat to your eyes?
The ASUS Flicker-Free technology’s Smart Dynamic Backlight Adjustment minimizes flicker and protects against eye fatigue, irritation, and weariness.
Does the VA24EHE support 144Hz HDMI?
Please be aware that Adaptive-Sync technology only supports DisplayPort or HDMI within 48-144 Hz.
Download this PDF Link:ASUS VA24EHE HD LCD Monitor User Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>