astro A50 Gaming Wireless Headset Instruction Manual

astro A50 Gaming Wireless Headset

Product Information

The product is a wireless microphone designed for use with Xbox One gaming consoles. It features a removable headband and ear cushions for customization and comfort. The microphone has a power switch, EQ switch, and master volume control for adjusting audio settings. The package includes a base station that connects to the console via USB and optical cables. The product also has a USB charging port and charge contacts for recharging the built-in lithium-ion battery.

Product Usage Instructions

Xbox One Setup

1. Switch the Base Station into Console Mode.
2. Plug one end of the USB Micro Cable into the Base Station and the other end into the Xbox One console.
3. Plug one end of the TOSLink Optical Cable into the Xbox One Optical port and the other end into the Opt in port on the Base Station.

PC Setup

1. Switch the Base Station into PC Mode.
2. Plug one end of the USB Micro Cable into the Base Station and the other end into your PC.
3. Connect the headset to the Base Station using the provided USB cable.

Charging
To charge the microphone

1. Insert the microphone into the Mic Slot on the Base Station.
2. Connect the Base Station to a power source using the provided USB cable.
3. The LED indicator on the microphone will turn amber to indicate charging.
4. Once fully charged, the LED indicator will turn off.

Note: The microphone should be properly recycled or disposed of when no longer in use, as it contains a lithium-ion battery.

MICROPHONE

• MIC UP : MUTE
• MIC DOWN: ON
• USB CHARGING PORT
• CHARGE CONTACTS
• REMOVABLE HEADBAND
• POWER SWITCH
• EQ SWITCH
• REMOVABLE EAR CUSHIONS
• DOLBY® ON/OFF
• MASTER VOLUME

BASE STATION

• AUX IN / MIC OUT

• OPTICAL OUT

• OPTICAL IN

• USB AUDIO / POWER

• GAME : VOICE BALANCE

• USB PLAY & CHARGE PORT

• CONSOLE / PC SWITCH

M TOSLINK OPTICAL CABLE

A50 USB CABLE

NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF

• THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL
• INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
• ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE
• THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR
• TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT

THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES

• REORIENT OR RELOCATE THE RECEIVING ANTENNA.
• INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER.
• CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS CONNECTED.
• CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED  OPERATION

THIS EQUIPMENT COMPLIES WITH THE EUROPEAN R&TTE DIRECTIVE. A COPY OF THE EU/EC DECLARATION OF CONFORMITY CAN BE FOUND AT HTTP://EU.SKULLCANDY.COM/PRODUCTDOCUMENTS
THIS DEVICE COMPLIES WITH INDUSTRY CANADA LICENSE-EXEMPT RSS STANDARD(S). OPERATION IS SUBJECT TO THE FOLLOWING

TWO CONDITIONS

1. THIS DEVICE MAY NOT CAUSE INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION OF THE DEVICE.
THE MAXIMUM ANTENNA GAIN PERMITTED FOR DEVICES IN THE BAND 5725-5825 MHZ SHALL COMPLY WITH THE E.I.R.P. LIMITS SPECIFIED FOR POINT-TO-POINT AND NON POINT-TO- POINT OPERATION AS APPROPRIATE.
LE GAIN MAXIMAL D’ANTENNE PERMIS (POUR LES DISPOSITIFS UTILISANT LA BANDE 5 725-5 825 MHZ) DOIT SE CONFORMER À LA LIMITE DE P.I.R.E. SPÉCIFIÉE POUR L’EXPLOITATION POINT À POINT ET NON POINT À POINT, SELON LE CAS.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY

TO OPERATE THE EQUIPMENT

CONTAINS LITHIUM ION BATTERY.
BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY

ASTRO GAMING

• MODEL: A50G03
• FCC ID : YQ6-A50G03
• FCC ID: YQ6-TXDX01
• IC : 9207A-A50G03
• IC :9207A-TXDX01
• MODEL : TXDX01

TRANSMITTER LED BEHAVIOR

MODE INDICATOR

• Console Mode : Red
• PC Mode : White

DOLBY

• On : White
• Off : No LED illuminated

BATTERY STATUS
Charge Level

Solid Red + Audible Tone
10% charge

Blink Red + Audible Tone
5% charge

HEADSET LED BEHAVIOR

INDICATOR LED

• Amber : Charging
• Red : Power On

PAIRING AND CHARGING

*BEFORE 1ST USE, CHARGE HEADSET FULLY

• ALIGN MICROPHONE WITH MIC SLOT, THEN PLACE HEADSET ONTO BASE STATION.
• IF BATTERY STATUS DOES NOT DISPLAY, RE-SEAT HEADSET
• WHEN BATTERY STATUS IS SHOWN ON THE BASE STATION, PAIRING IS COMPLETE

XBOX ONE SETUP

1. Switch Base Station into Console Mode.
2. Plug USB Micro Cable end into the Base Station & the USB end into the Xbox One.
3. Plug TOSLink Optical Cable into the Xbox One Optical port & plug the other end into the Opt in port on the Base Station. *Be sure to remove caps on the cable tips
4. Go into Settings, then ‘Display & Sound’. Under ‘Audio Output’, choose ‘Optical Audio’, and select ‘Bitstream Out’.
5. Under ‘Audio Output’, choose ‘Bitstream Format’ and select ‘Dolby Digital’.
6. That’s it! Your A50 Wireless Headset and Xbox One are set up and ready to game!

PC SETUP

1. Switch Base Station into PC Mode.
2. Plug Micro end of the Micro USB cable into the Base Station & the USB end into the PC.
3. avigate to your ‘Playback Device’ settings under the Control Panel option on your PC.
4. Select ASTRO A50 Game, right click & set as Default Device.
5. Select ASTRO A50 Voice, right click & set as Default Communication Device.
6. Navigate to your ‘Recording Devices’ tab in your Sound settings on your PC.
7. Select ASTRO A50 Voice, right click & set as Default Device & Default Communication Device.
8. That’s it! Your A50 Wireless Headset and PC are set up and ready to game!

FOR MAC USERS

1. Switch Base Station into PC Mode.
2. Plug in the Micro USB from your MAC into the Base Station.
3. Navigate to your ‘Settings,’ select ‘Sound,’ then ‘Output’ and choose ‘ASTRO A50 GAME.’
4. That’s it! Your A50 Wireless Headset and MAC are set up and ready to game!

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>