V-TAC ENSOR ON/OFF VIA MOVING HAND VT-8025 Installation Guide
- June 6, 2024
- V TAC
Table of Contents
INNOVATIVE LED LIGHTING
WEEE Number: 80133970
INSTALLATION INSTRUCTION
SENSOR ON/OFF VIA MOVING HAND (VT-8025)
TECHNICAL DATA:
Power Sourcing: 220-240V/AC
Power Frequency: 50/60Hz
Rated Curent: 5A
Rated Load: 500W (Traditional Lighting), 200W (LED
Lighting)
Detection Distance: 5-6cm
Working Temperature: -20~+50°C
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.
This is a Short Distance IR Sensor. Its ON or OFF is controlled by hand movements. When you move your hands towards the IR sensor, it gets detection and turn on the light. The light will be switched off until the IR sensor detects another movement by hands.
INSTALLATION INSTRUCTION:
- Switch off the power.
- Install the product on the wall with two enclosed inflated screws.
- Connecting the power and the load to sensor as the connection-wire diagram.
- Switch on the power and test it
CONNECTION-WIRE DIAGRAM
TEST:
- Switch on the power.
When you move your hands towards the IR sensor, it gets detection and turn on the light. The light will be switched off until the IR sensor detects another movement by hands.
NOTE: In front of the detection window there shouldn’t be hinder or unrest objects affecting detection.
WARNING
- Please make sure to turn off the power before starting the installation.
- Must be installed by professional electrician.
This marking indicates
that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B