IKEA 504.754.25 LAGAN Integrated Dishwasher 60 cm Instruction Manual

IKEA 504.754.25 LAGAN Integrated Dishwasher 60 cm

INFO

HOW TO USE

Product Description

1. Lower spray arm
2. Filters
3. Rating plate
4. Salt container
5. Rinse aid dispenser
6. Detergent dispenser
7. Cutlery basket
8. Lower basket
9. Upper spray arm
10. Upper basket

Control panel

1. On/Off button / Reset button
2. Delay start button
3. Indicators
4. Programme buttons
5. Power Clean button
6. AUTO programme button

Indicators

refilling.
****| Salt indicator. It is on when the salt container needs refilling.
Indicator| Description
---|---
| Machine Care indicator. It is on when the appliance needs internal cleaning with the Machine Care programme.
| Drying phase indicator. It is on when a programme with the drying phase is selected. It flashes when the drying phase operates.

Programmes Overview

Programme| Dishwasher load| Degree of soil| Temperature (°C)| Time (min)| Options| AutoOpen
---|---|---|---|---|---|---

Quick 30′

| Crockery, cutlery| Fresh soil| 50| 30| |

Rinse & Hold

| All types of load| All degrees of soil| Cold water| 15| |

90 Minutes

| Crockery, cutlery, pots, pans| Normal, lightly dried on soil| 60| 90| |
ECO1)| Crockery, cutlery, pots, pans| Normal, lightly dried on soil| 50| 227| |
AUTO| Crockery, cutlery, pots, pans| All| 50 – 60| 120 – 170| ****|

Machine Care| For cleaning the appliance interior. Refer to “Cleaning and Maintenance”.| 70| 60| |

This programme offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes. This programme is used to assess compliance with the Ecodesign Commission Regulation (EU) 2019/2022.

Options

You can adjust the programme selection to your needs by activating options.

Power Clean

• Power Clean improves the dishwashing results of the selected programme. The option increases the wash temperature and duration.

Basic settings

1. Factory setting.
2. Do not use salt at this level.

When the appliance is in setting mode, the indicators on the control panel represent available settings. For each setting, a dedicated indicator flashes:

Setting mode

their values.
| OK button. Press to enter the selected setting and to confirm changing its value.
| Next button. Press to switch between the basic settings and to change their values.

How to change a setting

1. Press and hold simultaneously and ECO for about 3 seconds to enter setting mode.
   • The light related to the indicator flash.
   • The indicators , and are on.
   • The lights related to the programme buttons are on.
2. Press Previous or Next until the indicator related to the selected setting flashes. The light related to indicates the current setting value:
   • For the settings with two values (on and off), the light is either on (= the setting is on) or off (= the setting is off).
   • For the settings with multiple values (levels), the light flashes. The number of flashes indicates the currentsetting value (e.g. 5 flashes + pause + 5 flashes… = level 5).
3. Press OK to enter the setting.
   • The indicator related to the setting is on.
   • The other indicators are off.
   • The light related to indicates the current setting value.
4. Press Previous or Next to change the value.
5. Press OK to confirm the setting value.
   • The new setting value is saved.
   • The appliance returns to the basic settings list.
6. Press and hold simultaneously and ECO for about 3 seconds to exit the setting mode. The appliance switches to the programme selection.

AutoOpen

• AutoOpen improves the drying results with less energy consumption. The appliance door opens automatically during the drying phase and remains ajar.

Caution

• Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance.
• If children, pets or people with disabilities have access to the appliance, deactivate AutoOpen. The automatic opening of the door may pose a danger and expose possible hazards inside the appliance (such as knives, sharp objects, chemicals).

Before first use

If you encounter an issue with your appliance, check “Troubleshooting” chapter in the full version of the User Manual available on: www.ikea.com.

Technical information

898 / 550

Electrical connection 1)| Voltage (V)| 220 – 240
Frequency (Hz)| 50
Water supply pressure| Min. / max. bar (MPa)| 0.5 (0.05) / 10

(1.0)

Water supply| Cold water or hot water 2)| max 60 °C
Capacity| Place settings| 13
---|---|---

1. Refer to the rating plate for other values.
2. If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption.

Link to the EU EPREL database

The QR code on the energy label supplied with the appliance provides a web link to the registration of this appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance. It is possible to find information related to the performance of the product in the EU EPREL database using the link  https://eprel.ec.europa.eu and the model name and product number that you can find on the rating plate of the appliance. Refer to the chapter “Product description”. For more detailed information about the energy label, visit www.theenergylabel.eu.

To download the full version visit www.ikea.com

© Inter IKEA Systems B.V. 2022
AA-2316353-2

References

• Hej! Welcome to IKEA Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>